You are reading the article Windows Is Stuck On Welcome Screen updated in December 2023 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Windows Is Stuck On Welcome Screen
When the Windows 11/10 computer boots up, it displays a temporary Welcome screen which is nothing but a blue screen with Welcome written on it and spinning circle of dots. At times, this screen stays longer and sometimes permanent that you end up force rebooting the computer. If you do not get to the login screen, and Windows 11/10 is stuck on the Welcome screen, then follow our troubleshooting tips to fix the problem.Windows 11/10 stuck on Welcome screen
Restore Windows 11/10
Run SFC and Chkdsk commands
Create a new account in Safe Mode
Force Automatic Repair or perform it manually
Reset Windows 11/10.
One of these methods should help you fix the problem. Make sure to check if the problem exists by performing a normal boot.
A similar experience happens when Windows 10 device starts on the Welcome Screen and as “Other user.” DWM gets killed all the time, and once in this loop, the session gets terminated, which causes to be logged in as Other User.1] Restore Windows 11/10
If the problem started occurring recently, and you have a restore point of earlier days when it was working fine, then I would suggest use System Restore. The process will bring back the system files, which may have gone corrupt, and the welcome screen will not be stuck anymore.
Related: Windows is stuck at the Lock Screen before login2] Run SFC and Chkdsk commands
The best way to run these commands is to boot into Safe mode as an admin user. Then you can run the SFC and Chkdsk so it can fix any corrupt system files which could be causing Windows 11/10 to be stuck on the Welcome screen.
Open Command Prompt, and then use either or both of these options
SFC or System File Checker: sfc /scannow
Chkdsk or Windows Disk Check Tool command: chkdsk /f /r
Let the command complete its execution, and if there is a problem which it can fix, it will be reported fixed.3] Create a new account in Safe Mode
Restart and boot Windows in Safe Mode.
Create another administrator account. Logout, and log in with the new account
Delete the previous user account.
Reboot normally and check if the solution worked.
This solution was reported to be working. You might have to reinstall applications if it was not installed for everyone.4] Force Automatic Repair or do it manually
You can either force automatic repair or do it manually. If you plan to do it manually, you need to boot into the Advanced Startup option, and then follow options as explained below.5] Reset Windows 11/10
It’s the last method we can suggest if nothing works. After all, you need to use Windows. Follow our detailed guide to find how you can reset Windows. Remember, after reset, you will have to install all the applications. If you choose to keep files and folder, all the personal data will remain untouched.
Before you go ahead with Reset, make sure to take backup up of all your files into an external drive. In case the Reset gets interrupted, you will not end up losing relevant data.
One of these steps will fix Windows 10 from getting stuck on the Welcome screen. We hope it was easy to follow them, but they need an admin user. So make sure to get help if you are not an admin user or do not understand the technicality.
If you need more helps, take a look at this post – Windows 11/10 is stuck on loading some screen.
You're reading Windows Is Stuck On Welcome Screen
After starting your computer, the BIOS runs a Power On Self Test (POST) to check all the hardware components. And if they are working properly, the BIOS looks for the boot loader in order to load the operating system (OS) and handle your PC’s control to this software.
During this transferring process, you will see the boot screen on your display. But if the screen gets stuck on the boot screen, it means the BIOS can’t handle the control to the OS.
Although it indicates that the computer passed the POST test, some hardware errors may still be responsible for the issue.
In case, the screen says to press a certain key to boot into setup, do so. After that, select the option to exit while saving changes even if you haven’t made any changes. If you continue to see the boot screen, cannot press the key or the option is not available, move on to following solutions.
The first method you should try is to remove all your peripheral devices and then power up your PC. Sometimes, such devices can affect your boot-up processes.
For instance, the boot priority configuration on your BIOS may be set to boot from the network or a USB device before the default storage device. In such cases, your PC can get stuck while looking for the OS from such systems if you have connected an Ethernet or a USB storage device respectively. At other times, the external device itself may have issues.
Your motherboard circuit contains many capacitors, whose main job is to hold charge to facilitate a smooth flow of current. However, such charges prevents your hardware from properly restarting. This can cause some system issues, especially after power failures or hard resets.
In such situations, you need to power cycle the computer to drain all the capacitor charge and properly refresh your hardware components.
Remove the power cable from the PC along with all peripheral devices.
For a laptop, you need to remove the battery as well. If it has internal batteries, unscrew the back panel and open it using a prying tool. Then, detach the battery cables and unscrew them if necessary.
Then, reinsert the power cable only, not the peripherals. You also need to reconnect the batteries on the laptop and reassemble it properly.
Power up the computer and see if it passes the boot screen.
If you need to power cycle your PC every time to get it to work, or if you need to power cycle the PC multiple time before being able to boot once, some capacitors on the motherboard may have blown. And it is also possible that the motherboard is failing in other ways.
In such cases, you need to take your PC or motherboard to a hardware specialist and have them repair any failed components.
Misconfigured BIOS configuration is also another cause of this issue. We already discussed how improper boot priority settings can be responsible. But some other settings can also cause similar issues.
If you can access the BIOS, you can easily select the corresponding option to reset your BIOS and resolve the issue. Otherwise, you need clear CMOS memory from your hardware end, which is the same as resetting BIOS settings.
Removing and reinserting the CMOS battery resets its memory. However, some devices also have backup CMOS due to which this method of reinserting the battery doesn’t work. So it’s better to use the motherboard jumper instead.
Disconnect all power sources on the PC.
If not, open the side panel or the back panel (if laptop) after removing all the screws holding it in place. You may need to use a prying tool to remove the laptop’s case.
It should usually contain three pins where two are connected using a jumper cap. Take out the jumper and use it to short the other two pins to clear the CMOS (you may also see which pins you need to short on the motherboard).
Leave it there for 10-15 seconds and put the jumper back in the original place.
If the jumper cap is not there, try not to use other conductive materials to short the connection. Instead, go to a local electronic store to buy a new one.
It is also possible that you are experiencing the issue while the system is trying to find an operating system to boot from. Issues with the storage drive are very likely in this case and you can check it by using a bootable media.
First, create a Linux Live USB or a Windows To Go Media using Rufus and boot using this media. If it doesn’t work, it’s more likely that your motherboard is not working properly. However, if your computer boots properly through such media, it indicates the following possible causes for the above error:
PC not detecting the storage drive with the OS partition
PC not recognizing the OS in the storage drive.
So, after booting to the media, use it to check if the system detects the storage drive or not. If it does, you need to clean install Windows to resolve any issues within. If not, it indicates a hardware issue. In such a scenario,
Disconnect all power sources on the PC.
Open the side panel on the PC after unscrewing it. If it’s a laptop, you need to remove all screws from the back panel and open it using a prying tool.
Some laptops come with many panels that cover different hardware components. In such a case, you simply need to remove the one over your storage device.
Unscrew the device from the case of the motherboard. Make sure not to touch the circuit parts with your hands unless you are wearing an antistatic band.
Reinsert them again after cleaning the ports using canned air or an ESD brush and reassemble everything.
Power up your PC and check if the issue resolves. If not, open the PC again, take out the storage devices and try connecting them with other computers. If they don’t work there as well, they are damaged and you need to replace them. Otherwise, your motherboard is responsible for the issue and you need to replace it.
The above error can also occur if your RAM sticks or slots are not functioning properly. This situation is actually quite easy to diagnose as RAMs are the easiest hardware part you can replace on your system.
Disconnect all power sources on the PC.
Open the side panel of the PC or the back panel of the laptop after unscrewing it.
Clean the sticks using rubbing alcohol and microfiber cloth and the slots using compressed air or an ESD brush.
First, try booting up your PC without any RAM (after reassembling everything else) and see if the same issue continues. If yes, the RAM is not responsible and you can move on. Otherwise, you need to troubleshoot this hardware component.
Try inserting the RAM sticks one at a time to separate DIMM slots and check if your PC boots every time. You can also try using the RAM on other devices or other RAM on your PC if applicable.
If you determined any faults with the RAM, you can naturally resolve the issue after replacing it with a functional one. If any of your slots are responsible, we recommend seeking help from a technician to replace them as it is a more delicate process.
You can also encounter this issue in rare situations if your Power Supply Unit (PSU) is not working properly. In such cases, sometimes, you won’t see the boot screen at all after powering up the system, and sometimes you do.
You can also check the PSU using the paperclip method or multimeters to make sure the issue is with the PSU. Then, you need to replace it to resolve your issue.
If the PSU is not responsible and all previous methods did not help, your motherboard is not working properly. And similar to the above, you need to replace it as soon as possible.
If you receive a CRITICAL_STRUCTURE_CORRUPTION error in Windows 11/10/8/7, you might be able to solve it using the solutions mentioned in this article. This Blue Screen of Death message can appear due to unsupported hardware, driver, and software. Along with the message you may even see error codes like 0x00000109, 0x8A287C67, 0x0B76E031, 0x3590B8E7, and 0x559F80CD.Fix CRITICAL_STRUCTURE_CORRUPTION Blue Screen
Here is the list of suggestions that can help you fix the CRITICAL_STRUCTURE_CORRUPTION error in Windows
Use Event Viewer for additional message
Use Windows Memory Diagnostic
Install Driver updates
Use Driver Verifier Manager
You will need an admin account and a clear understanding of the technicality1] Use Event Viewer for additional message
However, try these suggestions if the Event Viewer does not offer anything.2] Use Windows Memory Diagnostic
As the CRITICAL_STRUCTURE_CORRUPTION error can occur due to corrupted RAM, you can use the Windows Memory Diagnostic tool to find out more. Search for Windows Memory Diagnostic, select the option that says Restart now, and check for problems.
It should restart your computer and perform a diagnosis. See if anything there can help you.3] Install Driver updates
As per the official Microsoft statement, this problem can be caused due to outdated drivers. Users can get this BSOD error message if the hardware cannot perform properly with the system due to a very old driver. Therefore, check out your hardware manufacturer’s official website for the pending driver updates. If anything is available, download and install it right away.
Also, you should check whether your existing and new hardware is compatible with your Windows version.4] Use CHKDSK
Chkdsk is a command line tool available for Windows OS. By using different parameters, you can fix various hard disk-related issues.
Open Command Prompt or Windows Terminal using the Run As Administrator option and enter this command:chkdsk /f /r
It will take some time for the scan to complete. The tool will fix whatever is possible and report if something cannot be fixed.5] Use Driver Verifier Manager
Driver Verifier Manager is another Windows tool that helps users fix driver-related issues.
To get started, search for Verifier in the search box in Windows 11/10.
Following that, select Create custom settings.
In the next window, ensure you have ticked everything except Randomized low resources simulation and DDI compliance checking.
Next, choose Select driver names from a list option.
After that, you must select all the drivers from any unofficial provider. In other words, you need to select all the drivers not supplied by Microsoft.
Now open Command Prompt with administrator permission and execute this command-verifier /querysettings
It will display the Driver Verifier settings.
If any of the flags are enabled, boot your Windows 11/10 PC into Safe Mode, and run this command in the command prompt after opening it with admin permission-verifier /reset
It will reset Driver Verifier. Restart your PC and see.How long does a Windows system Restore take?
It usually takes 20 to 40 minutes, but it also depends on the size of the Windows installed on the PC and what needs to be restored. Along with the there, the process may also face issues when restoring, so it can extend further.Do we lose all data when the system is restored?
Partially. System Restore will bring back the OS to a point where it was working. So anything that happened after that will not be available. However, if you have backup files on the cloud or locally, you can easily restore them.
Did your Windows computer get stuck while restarting? Or is it caught up in an endless reboot loop? If so, there are several possible troubleshooting solutions you can try.
Your Windows PC usually gets stuck at the “Restarting” screen when system or other activity—such as Windows Update—interferes with the restart process.
Table of ContentsTry These Three Fixes First
Run through the three fixes below to fix a Windows PC stuck restarting. If none work, move on to the rest of the suggestions and solutions in this troubleshooting guide.1. Wait It Out
Generally, it’s a good idea to wait for some time to see if Windows completes restarting itself. For example, if you reboot your computer after updating Windows, there might be lengthy delays at the “Restarting” screen as the operating system finalizes the update. If you’ve already given your PC 15 or more minutes and it’s still stuck, continue with the following troubleshooting steps.2. Remove External Devices and Peripherals
Background processes related to computer peripherals—such as external hard drives and USB printers—can occasionally glitch and stop Windows from shutting down or restarting.
Try unplugging all unnecessary wired devices from your desktop or laptop and see if that makes a difference. If the computer uses Ethernet for online connectivity, remove the network cable.3. Hard Reset Your PC
Your next course of action involves a hard reset.
Warning: A hard reset can corrupt Windows or personal files, especially if it was working on something in the background—e.g., finalizing an update. Before you perform a hard reset, wait at least 15 minutes to confirm that Windows is stuck at the “Restarting” screen.
To perform a hard reset, start by holding down the Power button on your desktop or laptop for 5-10 seconds until the screen goes dark. Some laptops require holding down additional buttons to power off. Check the user manual or online documentation for the correct key combination.
Optional: If you use a desktop device, you might still want to disconnect the power cable from the CPU casing after turning off your PC. Then, wait for up to 10 seconds and plug it back in.
After the shutdown, press the Power button on your computer to boot it back up. If there were any unfinalized system updates, you might have to wait until Windows finalizes them before you get to log back into the desktop area.Use Windows Recovery Environment to Fix a PC Stuck Restarting
On rare occasions, hard-rebooting a PC stuck at the restarting screen will put it into an infinite boot cycle or result in Blue Screen of Death (BSOD) errors. If you were updating your PC, you could also get stuck at a “Getting Your PC” ready screen.4. Perform a Startup Repair
Instruct Windows to diagnose and fix startup issues resulting in the reboot loop. It’s completely automatic, so you don’t have to do anything besides select the Startup Repair option in WinRE.
If a startup repair fails to work, reload the Windows Recovery Environment and continue with the next fix.5. Run the System File Checker and Check Disk Utility
Use the Command Prompt console to run the System File Checker and the Check Disk Utility. That fixes stability issues with the operating system and repairs disk errors on the hard drive or SSD.
Select Command Prompt in WinRE, type the command below, and press Enter to launch the System File Checker:
sfc /scannow /offbootdir=C: /offwindir=D:Windows6. Uninstall New Updates
Select Uninstall Updates in WinRE and pick between the Remove the Last Quality Update and Remove the Last Feature Update options to uninstall the most recent quality or feature update that could be causing Windows to get stuck in a reboot loop.7. Perform a System Restore
If you have System Restore set up on your computer, select System Restore in WinRE and roll back your PC to a time when your computer used to work without issues.Use Safe Mode to Fix a PC Stuck Restarting 8. Reset Windows Update
Resetting Windows Update resolves reboot loops caused by unfinalized system updates. To do that:
to open a Run box. Then, type
to launch an elevated Command Prompt console.
net stop wuauserv
to stop the Windows Update service.
Execute the following commands below to rename the directory that houses temporary Windows Update data:
ren softwaredistribution sd.old
net start wuauserv
command to restart the Windows Update service.
Exit the Command Prompt.9. Run System Maintenance Troubleshooter
Forcing Windows to perform system maintenance via the Control Panel is another fix that can help resolve issues with a computer that keeps restarting. For that, you must:
, and press
and follow all on-screen instructions.10. Disable Fast Startup
Fast Startup is a power management option that speeds up your computer when you reboot it after a cold shut down. However, it can create various issues at startup. To disable Fast Startup:
that are currently available
Fast startup (recommended)
.11. Roll Back Device Drivers
Did you update a device driver recently? It could have something to do with your computer’s restart woes, so consider rolling back to the older driver version. To do that:
Switch to the
tab and select
Roll Back Driver
.12. Check for Malware
A severe malware infection can be another reason preventing your PC from starting. Perform a thorough check for computer viruses using a reputed anti-malware removal tool like Malwarebytes.
Alternatively, conduct an offline virus scan with Windows Defender. To do that:
, and press
Virus & threat protection
on the Windows Security side-bar.
Check the radio button next to
Defender Offline scan
Wait until Windows Defender reboots and scans your computer for malicious software.13. Clean Boot Windows
Clean booting Windows helps isolate issues caused by conflicts between third-party services and startup programs. To perform a clean boot:
Open a Run box, type
, and select
to open Task Manager.
Switch to the
tab, and disable all non-Microsoft-related processes.
Restart your PC and check if it boots normally.
If that helps, you must reactivate the third-party services and startup processes until you identify what’s causing the restarting problem. Check our guide to clean-booting a Windows operating system for more information.Windows Stuck Restarting Issue Fixed
Usually, fixing Windows 11 or 10 stuck restarting requires nothing more than hard-rebooting your computer. If the operating system continues to get stuck in a reboot loop, additional troubleshooting in WinRE and Safe Mode will help.
However, if none of the above fixes in this tutorial helps, check if your PC’s BIOS/UEFI needs an update or factory-reset and reinstall Windows from scratch.
Introduction to Learn to Code For Beginners
Web development, programming languages, Software testing & others
Thankfully, modern-day coding is a lot easier than it was before. For non-developers, learning to code can seem very daunting. But there are a lot of tools online, both free and paid, that make it easier to learn to code. Depending on the time available, you could learn to code in eight to ten weeks. It could take longer or even less. It’s all up to you, but learning coding is not as far-fetched and impossible as before; it is doable.
Here is a look at some of the steps and key things you need to follow and know to learn to code. Explore more about these online, and you can quickly create your prototype. Remember to keep learning and practicing, though. Constant practice is what makes any developer better.How to Learn Code for Beginners?
Following are the steps to learn code for beginners:1. Introduce Yourself to the Key and Code Terms
For many people, what makes coding seem confusing is its terminology. To familiarize yourself with the key terminology of coding. The key challenge to building a prototype is that there are a lot of components to know about. Here’s an overview of some of these components, but remember that it may take time to understand them fully. Sometimes, you may not understand them completely, even after you build your prototype.
Let’s understand these components by describing the entire process of a user visiting a website. First, they type in your website address or URL. Once they press enter, the browser sends a request via the internet to a machine that runs the website. This machine is the server.
Server: Servers are essentially computers that contain all the content, data, and coding to run your website. It receives requests from other client/user computers. You could buy your server, which is expensive, or you could rent storage on them, which is what most individuals or small/medium enterprises do. Amazon Web Services, Slicehost, and other popular web hosts are available. The server contains software that handles the user request. This software is called a web server, our next big component.
Web Server: Web Servers are software on your server that receives and sends requests and responses from and to the user. The requests and responses are usually in HyperText Markup Language (HTML), the universal language on the internet. Nginx and Apache are popular web servers. While you do not have to get your hands dirty too much on web servers, you need to know how to restart the server since server issues are the type of problem any web developer or website operator faces. So now we know what a server and web server do. The user sends a request to the server, and it’s time for the server to respond. The server must deliver data specific to the client’s request and display it in a format its web browser understands. How does it do that? It sends the request to our next major component: the web application framework.
Web Application Framework: Web application frameworks are probably the most important component for a web developer. They are responsible for receiving requests and generating an HTML page to be sent back to the user. All the work is done here. Ruby on Rails and Django, the built-in Python, are popular and best examples. When we talk about the best code to learn for beginners, you will spend most of your time because all the coding will happen. It is not super-critical to learn every detail about the framework you choose; you’ll get the hang of it over time and practice. You need to know enough to develop data structures and loops. For tools, you can do most of your programming on Textmate. GitHub is a good option for managing your revisions. So, the web app framework does all the hard work but doesn’t store the data. Where is all the databased? At the database: our next major component.
HTML and CSS: HTML is the universal format for web pages, and Cascade Style Sheets or CSS is the additional file used to style the HTML. This is one of the most accessible parts of learning to code. It is not programming, but knowing this can give you a huge edge. You could be ready to write your HTML page within weeks. As for tools, Firebug on Firefox is one of the best tools for learners. PSD2HTML is also recommended to turn Photoshop files into HTML.
You will have a development and production environment when you launch a website. The development environment is basically where you will work on your prototype. Regular users won’t have access to this part of your site. It is essentially a working version of your website with code et al. running on a local machine. This is better done on a Mac than on a PC.3. More Acronyms and Terms
There are a lot of other acronyms and terms used regularly while coding. Now that you know the major components, these acronyms should be much easier to understand and fit into the larger picture. Here is a look at some of the most popular ones:
Perl, Java, PHP: these are programming languages like Ruby and Python
XML: it is a format similar to HTML and is typically used by APIs (see below)
Now that you know the terms, acronyms, and major components, it is time to roll up your sleeves and learn some coding. Start off with an introductory understanding of Python and whatever web app framework you choose to work with. If you choose Python, here are some good options:
Google Python classes: Many videos and notes are available here as associated exercises. Solve these exercises independently until you get them right without referring to the answers. The whole experience of struggling with the exercises can be a huge learning tool.
There are lots of other resources available online. It’s recommended to join a few of them and do the first few lessons from the options available before you select one. Once you complete one resource, you can go through others to find unfamiliar concepts and get more practice.5. Learning Django
A Django Tutorial can help you learn almost everything about the tool. Work through the tutorial to form your code, delete it all, and work through it again. Remember that practice makes perfect. The first time you follow the tutorial, you will probably follow the step-by-step instructions without actually understanding each step. As you do it more often, you will get used to the concepts and better focus on how the parts work together.6. Learning more about Python and general programming
Intro CS class from Udacity: The courses generally have seven self-paced sessions, so don’t worry about deadlines. The Intro CS class typically takes two months, and it is highly recommended that you go for the intermediate programming class after this or the web development class too.
Intro CS course, Unit 1 from MIT: This is well-taught and approachable. Search more online to find more such resources, and sample them to find out what works best for you. You could even do more than one to strengthen your knowledge.7. Practice, practice, practice
Now you should have all the skills and knowledge to build your prototype. But it’s not going to be easy. And you will probably not succeed right away. Start with some exercises in Django, for example. They are not as hand-holding as the Django tutorial, but they give enough guidance for those not yet ready to take off the training wheels.8. Build the prototype
You have the skills, knowledge, and practice. Now it’s time actually to build your prototype. At this point, you could build it within a weekend too! Bear in mind you may not like the final results, but it is a starting point, and at the end of it, you get the satisfaction of seeing the results of your coding.Conclusion
By the end, You will go from ‘What’s coding?’ to building a functional prototype. That’s worthy of praise right there. But remember that the journey is far from over. It’s just starting. Continue to build prototypes as and when you can, and try different ones. Keep going, and you could become a formidable developer within months.
You can also get into the more complicated components, like the webserver and database. Even if you do not become a core programmer per se, you will still have a clear understanding of how the development process works and can give clear and relevant inputs to a development team. Moreover, you would better understand what can be done and what is impossible, and how long it would take to get things done.Recommended Articles
This has been a guide to How to Learn to Code For Beginners. Here we discussed the basic concept and 8 different steps to learn coding for beginners in detail. You can also go through our other suggested articles to learn more –
Do you want to know how to screen record on Windows 11? Find out the best methods of recording your screen on Windows 11.
Screen recording isn’t a fancy task anymore. Gamers might want to record their screen and share it with their friends and followers.
If you’re a professional, you may need to record your screen to show your colleagues or clients your problem. When you’re in situations like these, it’s normal to wonder how to record your screen on windows 11.
Worry no more! This blog will share the best and proven methods of screen record on Windows 11.1. How to Screen Record on Windows 11 With Xbox Game Bar
Windows 11 has a multifunctional Xbox Game Bar with a screen recorder feature. The only drawback of this tool is it can’t record your desktop screen or File Explorer.
Recording your Windows 11 screen is super simple with this method if you follow these steps:
Open the game or app that you want to record.
Press the Windows+Alt+ R keys simultaneously to start recording the screen.
A widget will appear on the right corner of the screen that’ll display the elapsed recording time.
Using that widget, you can also enable or disable the microphone.
To stop recording, press the Windows+Alt+ R keys again.
The Xbox Game Bar will show an alert about the recording of your gaming clip.
Go to the Captures folder inside the Videos folder of your PC to find the recorded clips.Additional Xbox Game Bar Settings You Might Want to Configure
Most people who want to record their screen using Xbox Game Bar find the default settings sufficient.
Enable or disable recording the background while playing a game
Choose a maximum record length between 30 minutes, 1 hour, 2 hours, and 4 hours
You can also turn off audio while recording the screen, turn on the mic by default, and choose the Windows 11 audio settings
Adjust the volume of the microphone and system
Increase video frame rate to 60 fps
Make video quality Standard or High
Keep or omit the cursor during the screen recording.2. How to Screen Record on Windows 11 With Microsoft PowerPoint
If you have a Microsoft Office subscription, you can use MS PowerPoint to record your screen on Windows 11.
This method is convenient for students with MS Office subscriptions through their school or college. You need to perform the following steps to record your Windows 11 screen:
To begin with, open the PowerPoint app on your Win 11 computer.
In the Media section on your right, you’ll find the Screen recording option.
When prompted, select the screen area that you want to record.
The Microphone and pointer visibility will be enabled by default.
Disable them if you don’t want these features.
Now, go to the screen you want to record
To stop the recording, press the Windows+Shift+Q keys simultaneously.
To pause, move the cursor while recording to get the drop-down bar containing the Pause and Stop buttons.
Add a filename and select the location for storing the screen record.
The recording will be saved in MP4 file format.3. How to Record Your Screen on Windows 11 With Third-Party Apps
If you’re not happy with either of these methods and looking for a straightforward approach, You can take help from free third-party solutions.
Navigate to the Microsoft Store, where you’ll find various free apps that can record your screen.
Screen Recorder for Windows 11, Screen Recorder Lite, OBS Studio, and RecForth are free Windows apps with good ratings that you can use for recording screens.Conclusion
Whether you’re a gamer or not, you may come across the need to record your screen on Windows 11.
To help you in such situations, we discussed sharing screen records on Windows 11.
The solution is also stated above if you are wondering how to screen record on windows 11 with audio.
Update the detailed information about Windows Is Stuck On Welcome Screen on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!