You are reading the article What Is Nat, How Does It Work, And Why Is It Used? updated in February 2024 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 What Is Nat, How Does It Work, And Why Is It Used?
You might have heard of something called an IP Address, – if you haven’t, start off by reading our article explaining the concept – but for this article on NAT (Network Address Translation) you need to know that IP addresses are limited. You also can’t have two devices on a network with the same IP address.
The problem is that different networks, such as your home network and computers on the internet as a whole, will inevitably have the same IP addresses or have incompatibilities in how their network addresses are set up. NAT solved both the problem of IP address scarcity and incompatible networks that need to talk to each other.
Table of Contents
Most of the time it’s not something you need to worry about, but sometimes your internet woes are a result of NAT going wrong. So having a basic understanding of what NAT is and how it works can help solve the issue.Where Does NAT Happen?
In the case of regular users like us, NAT is a job handled by your router. The router has an IP address assigned to it by your service provider. That’s the address that the rest of the internet sees. Every device on your home network is assigned a private IP address, which is what they’ll use to talk to each other.
When a device on your network wants to communicate with the outside world, the router stands in for it. The router has a public IP address, which everyone else sees. It keeps track of which private IP addresses requested what traffic and makes sure the data packets are routed to the right device.Private Vs Public IP Addresses
By convention, certain ranges of IP addresses are reserved for specific purposes. Public IP addresses are reserved for the internet-facing devices such as your router or web servers. Your ISP allocates a public IP address to your router and that’s the address that all outsiders on the web see. Typically a private internet address is something like 192.168.0.X or 10.1.1.X, but this varies from one router to the next. While private addresses have to be unique within a private network, they are almost certainly the same between private networks.
A public IP address, as mentioned above, is the one seen by everyone else on the internet. When you visit a website, your browser is connected to its public IP address. Typically, home routers don’t allow direct access through its public IP address that wasn’t initiated by it. This means you can’t just type in the public address of your friend’s router and have access to devices on their network.
However, some web services and devices, such as video game consoles, need a more lenient approach. This is where various NAT types come into play. Often problems arise from your connection’s NAT type being wrong for the type of service you’re trying to use. We’ll cover NAT types in more detail next.NAT Types
While the basic idea of what NAT is isn’t too complicated, in practice there’s a lot of nuance to how it actually works. There are various types of NAT that are appropriate for different translation needs.Static NAT
The static style of NAT maps one specific private IP address to a specific public IP address. With static NAT it’s possible to access the device mapped to the public address directly.
This is the type of NAT used for web servers that are also part of a private network. When accessing the server through this static map, you can’t also access the other devices on its private network. The server itself, however, can talk to the devices on its private network with no issue.Dynamic NAT
Dynamic NAT is used when you have a pool of public IP addresses that you want to dynamically assign to the devices on your private network.
This is not used for web server access from outside the network. Instead, when a device on the private network wants to access the internet or another resource not on the private network, it is assigned one of the public IP addresses in the pool.NAT Overload (PAT)
With elements of both static and dynamic NAT, the NAT overload style is the most common form and is what most home routers use. It’s known as NAT with Port Address Translation (PAT) among other names.
In most cases, your router has one public IP address assigned to it, yet all the devices on your network probably want internet access. Using NAT overload the router sets up a connection between its public IP address and that of the server. It then sends the packets to the server, but also assigns a return destination port.
This helps it know which packets are meant for which IP address on your private network. That’s the PAT part of the process, incidentally.Proprietary NAT Types
To muddle things even more, some companies have decided to slap their own NAT classifications on things. This is mostly applicable to game consoles and you’ll find that when you do a network test, it will tell you that you’re using something like NAT Type 2 or NAT Type D.
These classifications are specific to the console or device makers and you should check their official documentation to figure out what each classification actually means.Common Fixes for NAT Issues
Most of the time, for most people, NAT works perfectly and with complete transparency. Sometimes however, it malfunctions or gets in the way.
Once again, game consoles are most likely to run into issues, because some of their services need your network to accept access requests to your public IP address from outside, since standard NAT configurations usually don’t allow this. The good news is that there are a few common fixes you can try to make NAT less restrictive and allow incoming connections.
You also have the option of doing manual port forwarding, so that devices that need a less strict connection can get it on a case-by-case basis.It’s Only NATural
You're reading What Is Nat, How Does It Work, And Why Is It Used?
What Is Google Home Mini and How Does It WorkWhat Is Google Home Mini
The Google Home Mini is a voice-controlled compact speaker that can play music, controls home smart gadgets, can answer trivial questions, creates a calendar, add things to the shopping cart, play videos on Chromecast, and much more.
If you have Google Home and you want to extend the capabilities of the smart speaker, you can add Google Home Mini to the club.
Also Read: Keep Your Schedule Right with these Calender AppsGoogle Home Mini Features
The special feature about Google Home Mini is its size; Google Home Mini comes in the size of a donut.
Google Home Mini looks like an air-freshener with a diameter of 4-inch and curved sides.
Google Home Mini is a little bit larger than Amazon’s Echo Dot. However, the sloppy sides and soft shape look more ominous and give a unique look.
Available in three colors-dark gray, light gray, and coral red. Such colors give a modern and inoffensive look to the home with HGTV-slash-Apple-Store home décor.
The top is covered with a textured fabric that always provides a brand new look. However, I have a strong feeling that it will catch dust easily.
Additionally, if you are a pet owner, you have to keep it in a safe place where pets like dogs and cats can’t reach. Otherwise, it will be scratched.
Volume is tap controlled like you have to tap on the right and left side to control the volume of the smart speaker. Middle tapping will pause the music or alarm or cancel any command. Additionally, the touch is much sensitive.
Google has disabled “Hey Google” or “ Ok Google ” features due to bugs in the system.
Meanwhile, the Google Home Mini looks cool and nice and comes with longevity and usability.
There are four multi-colored lights that light when Google Mini listens, processes, and mutes.
The unique feature is the additional mute button on the back of the Google Home Mini. You can also mute Google Mini with voice control.
The Google Home Mini actually works equivalent t three speakers placed in different places at home. A top-firing smart speaker can be the appropriate name for the Google Home Mini.
Mini microphones are so cool that they can listen even while playing music in the other room.
But, sources state that the call feature does not work properly.
Therefore, if you want to use the smart speaker for playing music with better audio quality . You can use it as a Bluetooth speaker. But, if you have a cast speaker, you can make most of the Google Home Mini.Google Home Mini on a Comparison Table
Good Features Bad Features
Good sound quality
Dust catching fabric
Unique and attractive design
Issues faced in callingGoogle Home vs. Google Home Mini
Audio is good
Good microphone sensitivity
Good microphone sensitivity
Compact and unique design
Multi-color LED Light
Multi-color LED Lights, add colors to the décor
Lacks touch controls on the topHow to use Google Home Mini
Below-mentioned is the steps to use Google Home Mini:
1. Plug the power cable in your Google Mini.
2. Plug the adapter in a wall switchboard.
3. Set up your Google Home Mini (download the app and set up the device).
4. Start having a conversation with your Google Home Mini and enjoy it.
I hope the blog was useful and informative in terms of Google Home Mini. Comment down and let us know which feature you like about Google Home and Google Home Mini.
Thanks for reading.
How To Lock Down Privacy on Amazon Echo and Google home
Tips To Protect Your Google Home AssistantQuick Reaction:
About the author
blog / Technology What is Computer Science? Why Does it Matter?
Share linkWhat is Computer Science?
Contrary to popular belief, it is not just about programming. According to chúng tôi computer science studies computers and computing, including their theoretical and algorithmic foundations, hardware and software, and their uses for processing information, with a particular focus on software and software development.
The primary study areas include network, database, artificial intelligence, software engineering, human-computer interaction, programming, vision and graphics, and computer theory. As a computer scientist, you can pursue a career in various roles, such as software developer, data scientist, computer systems and network manager, systems analyst, and machine learning expert.Why is Computer Science Important?
It has played a significant role in today’s digital era. Technology has not only impacted every aspect of personal lives but also revolutionized industries such as communication, scientific research, education, healthcare, commerce, and entertainment, among others. It has brought knowledge to your fingertips and connected you to the world.Brief History of Computer Science
People have used mechanical devices for thousands of years. One of the earliest tools for use in computation was the abacus, developed in the period between 2700–2300 BCE. The Antikythera mechanism, which people used to calculate astronomical positions, was created in 1901 and is believed to be the earliest mechanical analog computer. In the 1930s, after the British mathematician Alan Turing’s work on the first abstract digital computer, Turing machines became the foundation of all modern computers. Furthermore, the concept of the stored-program computer is credited to Hungarian American mathematician John von Neumann.Computer Science Disciplines Programming languages Artificial Intelligence
This refers to machines programmed to mimic human intelligence to perform tasks efficiently. Artificial intelligence is being applied in almost every industry and seems to have limitless potential.Data Structure and Algorithms
Data structuring is a method of storing and organizing data in a virtual system. The algorithm is a collection of steps a computer executes to perform tasks. Collectively, data structure and algorithms help in creating and optimizing computer programs.Computer Network
This is a connection of multiple devices using various paths to send and receive data.Graphics and Visual Computing
This focuses on the creation of pictures with the help of a computer.Software Engineering
This focuses on the design, development, testing, and maintenance of a software application.Is Computer Science a Good Career?
It is a highly lucrative and in-demand field. According to the U.S. Bureau of Labor Statistics (BLS), the median annual salary of a technology professional in the US is $109,020, and the jobs in this field will likely grow by 25% from 2023 to 2031, making it one of the most coveted fields.
Additionally, according to the NACE salary survey 2023, the average salary projection for graduates was $72,173, a climb of 7.1% in just one year. A career in this field can lead you to a wide range of roles and open doors to some of the highest-paying jobs in the world.
Do you want to pursue a career in this field but aren’t sure where to begin? Let Emeritus guide you with its range of online computer science courses.Frequently Asked Questions Is Computer Science Only Coding?
Although coding is an essential part of computer science study, it is just one part of the diverse field.What is The Difference Between Computer Science and Information Technology?
While computer science deals with designing and building computers and software, information technology deals with software applications.What are the Important Subjects?
The primary subjects are computer networks, software engineering, data structure, artificial intelligence, mathematics, physics, computer programming, theory of computing, computer graphics, human-computer interaction, and database systems.Is Computer Science Hard?
It is a demanding discipline, but if you have an aptitude for mathematics, and science, love problem-solving, and technology, along with determination, it is worth a shot.What is a Computer Science Degree Worth?
It is a highly coveted field. A degree can lead you to a wide variety of jobs in many industries and is one of the highest-paying jobs in the world.
Now that you have the answer to the question ‘what is computer science’, you are better placed to know if you want to pursue this field and, importantly if you can stay motivated and passionate about it. If the answer is yes, then start exploring Emeritus’ online computer science courses now.
By Krati Joshi
Write to us at [email protected]
Everyone seems to want to jump into purchasing a SAN; sometimes they are quite passionate about the technology. SANs are, admittedly, pretty cool. They are one of the more fun and exciting large-scale hardware items that most IT professionals get a chance to have in their own shops. Often the desire to have a SAN of one’s own is a matter of “keeping up with the Joneses.” Using a SAN has become a bit of a status symbol — one of those last bastions of big business IT that you only see in a dedicated server closet and never in someone’s home (well, almost never).
SAN is a soft term used to mean multiple things at different times and can become quite confusing. In the context of this article, I use SAN in its most common context, that is to mean a “block storage device” and not to refer to the entire storage network.
SAN provides back-end storage. The need for it would be, in all cases, determined by other aspects of your architecture. If you have not yet decided upon many other pieces of your infrastructure, you simply cannot know that a SAN is going to be necessary, or even useful, in the final design.
It is clear that the drive to implement a SAN is so strong that often entire projects are devised with little purpose except, it would seem, to justify the purchase of the SAN. As with any project, the first question that one must ask is “What is the business need that we are attempting to fill?” Not “We want to buy a SAN, where can we use it?”
SANs are complex, and with complexity comes fragility. Very often SANs carry high cost.
But the scariest aspect of a SAN is the widespread lack of deep industry knowledge concerning them. SANs pose huge technical and business risk that must be overcome to justify their use. SANs are, without a doubt, very exciting and quite useful, but that is seldom good enough to warrant the desire for one.
We refer to SANs as “the storage of last resort.” What this means is, when picking types of storage, you hope that you can use any of the other alternatives such as local drives, DAS (Direct Attached Storage) or NAS (Network Attached Storage) rather than SAN. Most times, other options work wonderfully. But there are times when the business needs demand requirements that can only reasonably be met with a SAN. When those come up, we have no choice and must use a SAN. But generally it can be avoided in favor of simpler and normally less costly or risky options.
I find that most people looking to implement a SAN are doing so under a number of misconceptions.
The first is that SANs, by their very nature, are highly reliable. While there are certainly many SAN vendors and specific SAN products that are amazingly reliable, the same could be said about any IT product.
High-end servers in the price range of high-end SANs are every bit as reliable as SANs. Since SANs are made from the same hardware components as normal servers, there is no magic to making them more reliable. Anything that can be used to make a SAN reliable is a trickle down of server RAS (Reliability, Availability and Serviceability) technologies.
Just like SAN, NAS and DAS, as well as local disks, can be made incredibly reliable. SAN only refers to the device being used to serve block storage rather than perform some other task. A SAN is just a very simple server. SANs encompass the entire range of reliability with mainframe-like reliability at the top end to devices that are nothing more than external hard drives — the most unreliable network devices on your network &mdash: on the bottom end.
SANs have gained a reputation for reliability because businesses put often extreme budgets into their SANs that they do not put into their servers. So they are often comparing is a relatively high end SAN to a budget server.
The second misconception is that SAN means “big” and NAS means “small.” There is no such association. Both SANs and NASs can be of nearly any scale or quality. They both run the gamut and there isn’t the slightest suggestion from the technology chosen whether a device is large or not.
In fact, a SAN actually can technically come “smaller” than a NAS solution. However, although there are SAN products on the market that are in this category, it is very rare to find them in use.
The third misconception is that SAN and NAS are dramatically different inside the chassis. This is certainly not the case as the majority of SAN and NAS devices today offer “unified storage,” meaning a storage appliance that acts simultaneously as both SAN and NAS.
The key difference between the two is not in backend technology or hardware or size or reliability. Instead, the defining difference is the protocols used to transfer storage. SANs are block storage exposing raw block devices onto the network using protocols like fibre channel, iSCSI, SAS, ZSAN, ATA over Ethernet (AoE) or Fibre Channel over Ethernet (FCoE). NAS, on the other hand, uses a network file system and exposes files onto the network using application layer protocols like NFS, SMB, AFP, HTTP and FTP which then ride over TCP/IP.
The fourth misconception is that SANs are inherently a file-sharing technology. This is NAS. SAN simply takes your block storage (hard disk subsystem) and making it remotely available over a network. The nature of networks suggests that we can attach that storage to multiple devices at once and indeed, physically, we can. But SAN is not intended for file-sharing. There are mechanisms available in special clustered filesystems and their drivers to allow for this, but this requires special knowledge and understanding. Many people acquiring SANs are unaware that they need these tools for what they often believe is the very purpose of the SAN — a disaster so common that I probably speak to someone who has done just this almost weekly.
The fifth misconception is that SANs are fast. SANs can be fast; they can also be horrifically slow. There is no intrinsic speed boost from the use of SAN technology on its own.
It is actually fairly difficult for SANs to overcome the inherent bottlenecks introduced by the network on which they sit. Some other storage options, such as DAS use all the same technologies as SAN, but lack the bottleneck and latency of the actual network an equivalent. As a result, DAS will be just a little faster than its SAN counterpart. SANs are generally a little faster than a hardware-identical NAS equivalent, but even this is not guaranteed. SAN and NAS behave differently, and in different use cases either may perform better than the other. SAN would rarely be chosen as a solution based on performance needs.
The sixth misconception is that a SAN eliminates the inherent problems associated with storage choices. A good example is the use of RAID 5. This would be considered bad practice in a server, but when working with a SAN (which in theory is far more critical than a standalone server) often careful storage subsystem planning is eschewed based on a belief that SAN technology has somehow fixed those issues or that they do not apply.
It is true that some high-end SANs do have some amount of risk mitigation features unlikely to be found elsewhere, but these are rare and exclusively relegated to very high-end units where fragile designs would already be uncommon. It is a dangerous, but very common practice, to take great care and consideration when planning storage for a physical server but skip that planning and oversight when using a SAN. You cannot assume that the SAN handles all of that internally or that it is simply no longer needed.
Now that we’ve shot down many misconceptions about SAN, you may be wondering if SANs are ever appropriate. They are, of course, quite important and incredibly valuable when used correctly. The strongest points of SANs come from consolidation and special types of shared storage.
Historically, customers sought out SAN solutions for consolidation. A SAN allows us to combine many filesystems into a single disk array, allowing far more efficient use of storage resources. Because SAN is block level, it is able to do this anytime that a traditional, local disk subsystem could be employed.
In many servers, and even many desktops, storage space is wasted due to the necessities of growth, planning and disk capacity granularity. If we have twenty servers each with 300GB drive arrays but each only using 80GB of that capacity, we have large waste. With a SAN would could consolidate to just 1.6TB, plus a small amount necessary for overhead, and spend far less on physical disks than if each server was maintaining its own storage.
To efficiently leverage consolidation, it is necessary to have scale. And this is where SANs really shine — when the number of attaching nodes becomes very large. SANs are best suited to large scale storage consolidation. This is their sweet spot and what makes them nearly ubiquitous in large enterprises and very rare in small ones.
SANs are also very important for certain types of clustering and shared storage that requires single shared filesystem access. This is actually a pretty rare need outside of one special circumstance — databases. Most applications are happy to utilize any type of storage provided to them, but databases often require low-level block access to be able to properly manipulate their data most effectively. Because of this, they can rarely be used, or used effectively, on NAS or file servers. Providing high availability storage environments for database clusters has long been a key use case of SAN storage.
Outside of these two primary use cases, which justify the vast majority of SAN installations, SAN also provides for high levels of storage flexibility. Potentially, SANs can make it very simple to move, grow and modify storage in a large environment without needing to deal with physical moves or complicated procurement and provisioning. Again, like consolidation, this is an artifact of large scale.
In very large environments, SAN can also provide a point a demarcation between storage and system engineering teams, allowing there to be a handoff at the network layer, generally of fibre channel or iSCSI. This clear separation of duties can be critical in allowing for teams to be highly segregated in companies that want highly discrete storage, network and systems teams. This allows the storage team to do nothing but focus on storage, and the systems team to do nothing but focus on the systems without any need for knowledge of the other team’s implementations.
The most important aspect of SAN usage to remember is that SAN should not be a default starting point in storage planning. It is one of many technology choices and one that often does not fit the bill as intended — or does so but at an unnecessarily high price point either in monetary or complexity terms.
Instead, start by defining your business goals and needs. Select SAN when it solves those needs most effectively, but keep an open mind and consider the overall storage needs of the environment.
Since the very beginning, YouTube has been quite capable of recommending relevant videos. Now, with machine learning operating at its peak, the recommendation system has gotten even sharper, allowing you to explore different videos across the board.
To make exploration more fun, YouTube has introduced another neat, new feature, which would allow you to refresh your feed whenever you need it. So, without further ado, let’s check out what ‘New To You’ is and how it would help you find new recommendations.
Related: YouTube PIP Not Working on iPhone? How To Fix in 8 Way
What is ‘New to You’ on YouTube?
For mobile devices, ‘New to You’ is a new tab on the YouTube app that would allow you to get fresh recommendations, beyond the standard recommendations you get on the home screen. It only includes videos that you haven’t watched, allowing you to explore different categories.
The feature has been enabled through a server-side update on mobile devices. The feature can be availed through the computer — desktop browser — as well but it’s not as straightforward as the mobile client.
Related: How To Search Audio Transcripts of a YouTube Video To Find Which Part You Want to Watch
How does ‘New to You’ work?
Usually, the standard YouTube feed is quite capable of throwing a list of recommended videos at you. However, if you have been consuming YouTube regularly, your news feed might get a little boring, with older/already watched videos populating the primary feed more often than not.
‘New to You’ is a breath of fresh air in that respect — especially on your mobile device. The new recommendation system offers you videos that you haven’t seen yet, while also keeping your preferences in mind. It keeps track of your watch and search history, but widens the scope of recommendation, resulting in curated recommendations that are not identical to the stuff you already watch.
So, all in all, you get a nice recommendation system that not only keeps you interested but also doesn’t recommend stuff that is too wild for your liking.
Related: What Is Bally Sports Wisconsin?
Is ‘New to You’ personalized?
‘New to You’ is not as personalized as your regular explore feed, but there are elements that you will find familiar. For example, ‘New to You’ shows you videos that are in line with the stuff you generally watch. So, in that sense, it is personalized to an extent.
However, it doesn’t show you videos from channels you are already subscribed to. You get fresh videos from channels that might interest you, which can help your watchlist grow organically. It’s not as personalized as your Explore feed but feels a lot more targeted than the Discovery space.
Relevancy is a key term when it comes to ‘New to You,’ more so than personalization.
Related: How To Get Spotify or YouTube Music in Quick Settings on Android 12
How to find ‘New to You’ on Mobile
If you are running the latest version of the YouTube app, you may have received the server-side update by now. To use the ‘New to You’ recommendation system, all you have to do is launch the YouTube app and go to your ‘Home’ tab.
At the top, on the right of the ‘Explore’ section, you should find the ‘New to You’ tab.
If you don’t swipe down to refresh the feed. Once you get the button, tap on it to explore the ‘New to You’ feed.
How to find ‘New to You’ on computer
If you have subscribed to thousands of channels over the course of your YouTube history, you might not even see the button appear on YouTube.
Why is your ‘New to You’ button not glowing?
When you have a new recommendation the ‘New to You’ tab would have a blue-magenta border around it. When you exhaust the list of recommendations, the tab stops glowing and resembles any other tab on the page. So, if your ‘New to You’ button seems ordinary and sits at the end of the top carousel, YouTube is just asking for a bit of time to catch up with you.
There are growing concerns that Apple could be facing an anti-trust investigation by the US Department of Justice.What does antitrust mean?
In most jurisdictions around the world, it is illegal for large companies to band together to form agreements or “trusts” to behave in a particular way – for example, to all sell their products for the same high price. Laws designed to outlaw this type of behavior are called antitrust legislation.
However, the term is used more generally to refer to laws designed to prevent companies from engaging in any kind of anti-competitive action – that is, do anything that would tend to artificially distort competition within a market.
One common myth is that antitrust laws only apply to monopolies. This is very much not the case: They apply to any company large enough to have a dominant position in any market. As we shall see below, the definition of the word “market” can be crucial to deciding whether antitrust concerns arise.Why is Apple facing antitrust investigations?
First, Apple is a very large company, and it would be very easy for a company of that size to commit antitrust violations, so it is to be expected that any massive corporation would be put under the antitrust microscope.
But in Apple’s case, there are some more specific concerns based on the company”s market dominance in particular areas. These are addressed below.What are the antitrust concerns with Apple?
There are a number of different ones, in areas as diverse as ad tracking and Sign In With Apple, but here are three of the main ones.The App Store
The biggest antitrust concern is the App Store.
Apple argues that it does not have a dominant position in this market, as it considers the relevant market to be either “smartphones” or “apps.” Since the company holds a minority share of the smartphone market in most of the countries in which it operates, it believes it cannot be considered to have a dominant position.
Competition regulators tend to take the view that the relevant market is “iOS apps,” and here Apple has a 100% monopoly on their sale and distribution. Edge cases aside, there is no way for a developer to bring an iOS app to market without selling it through the App Store.
Companies like Epic Games argue that they should be allowed to sell in-app purchases without Apple taking a cut of their revenue. The argument here is that Apple harms developers by taking part of their income, and consumers by forcing developers to charge more to make up for Apple’s cut. Apple, in response, says that it is perfectly normal for a company to take a cut of the sales it facilitates.Default apps Relationships with carriers and retailers
Apple has also been found guilty in more than one country of exploiting a dominant position within the smartphone market to place undue demands on carriers and retailers.
Because the popularity of iPhones meant carriers had to sell them, Apple was able to dictate terms. In South Korea, for example, it was accused of imposing three onerous conditions on local carriers:
Additional areas of concern range from Apple Pay to a 4K video codec alliance!What could happen to Apple as a result?
Antitrust outcomes will usually happen on a country-by-country basis, though there are exceptions. In Europe, for example, it is likely that the European Union will act as a bloc, and that any legislation applying to Apple will apply across all 27 member countries.
The worst-case scenario for Apple is for the US government to call for the breakup of the company. For example, it might be ruled that Apple Inc cannot run an App Store while also selling the iPhones on which those apps run. This is not a likely outcome, however.
A more likely scenario is a series of smaller changes. For example, Apple might be required to appoint an independent oversight board to carry out app reviews, or that it must allow Spotify to offer in-app subscriptions without taking a cut.How is Apple responding?
In public, Apple’s stance is an outraged one, arguing that it does not have a dominant position and is doing nothing wrong. Behind closed doors, the company is aware that it either has to change some of its practices, or be forced to do so by law.
For example, while publicly declaring that a 30% commission on apps was industry standard, Apple made a massive U-turn by introducing the Small Business Program, with a 15% commission instead. Although touted as applying to the smallest developers, it in fact applies to 98% of them. It would be more accurate to say that the App Store now has a standard commission rate of 15%, with a higher 30% rate applying only to a tiny minority of companies.
The company has also quietly made a number of other changes in direct response to antitrust concerns, for example, opening up the Find My app to third-party accessories, and allowing people to change their default email app and web browser.
However, Apple is still sticking its head in the sand and hoping the issue will go away – when it absolutely won’t.
Update the detailed information about What Is Nat, How Does It Work, And Why Is It Used? on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!