You are reading the article Twrp Recovery V2.6.3.0 For Samsung Galaxy S3 Mini Gt updated in December 2023 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Twrp Recovery V2.6.3.0 For Samsung Galaxy S3 Mini Gt
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: TWRP RECOVERY ON SAMSUNG GALAXY S3 MINI GT-I8910Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I8910!
Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash TWRP Recovery on your Samsung Galaxy S3 Mini. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy S3 Mini on your computer.
► SAMSUNG GALAXY S3 MINI DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the Odin zip file and TWRP tar file given below. Transfer both Odin and recovery tar file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE TWRP TAR FILEFor latest version of the recovery, check the original page →
STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing TWRP Recovery, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Move the TWRP tar file, chúng tôi in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
openrecovery-twrp-2.6.3.0-golden.tar
Disconnect the Galaxy S3 Mini from PC if it is connected.
Boot your Samsung Galaxy S3 Mini into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy S3 Mini as said above in ‘Before you begin..’ section.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
TWRP Recovery has installed successfully on your S3 Mini. To boot your Galaxy S3 Mini into Recovery Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together: Volume Up + Power + Home.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy S3 Mini from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy S3 Mini from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Your suggestions and queries, if any, are most welcomed!
You're reading Twrp Recovery V2.6.3.0 For Samsung Galaxy S3 Mini Gt
Back To Stock/Downgrade Samsung Galaxy Music Gt
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
SAMSUNG GALAXY MUSIC GT-S6010L OFFICIAL JELLY BEAN 4.1.2 FIRMWAREBefore you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-S6010L!
Do not use the procedures discussed here on any other variant of Galaxy Music (Example: GT-S6010 or GT-S6012) or any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully flash stock firmware on your Samsung Galaxy Music. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Music on your computer.
► SAMSUNG GALAXY MUSIC DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the Odin zip file and firmware file given below. Transfer both Odin and firmware file to a separate folder on your computer just to keep things tidy.
ODIN ZIP FILE FIRMWARE ZIP FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing stock firmware, which might format internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin zip file, Latest Odin3 v3.09.zip on your computer (using 7-zip free software, preferably) to get this file: Odin3 v3.09.exe
Extract/Unzip the Firmware zip file, S6010LUBUBMG4_S6010LUUBBMG1_ARO.zip on your computer (using 7-zip free software, preferably) to get this file: S6010LUBUBMG4_S6010LUUBBMG1_S6010LUBUBMH1_HOME.tar.md5
Move the firmware file, S6010LUBUBMG4_S6010LUUBBMG1_S6010LUBUBMH1_HOME.tar.md5, in the same folder in which you extracted Latest Odin3 v3.09.zip (Just for your convenience, that is). So, now you’ll have the following files in that folder:
Odin3 v3.09.exe
S6010LUBUBMG4_S6010LUUBBMG1_S6010LUBUBMH1_HOME.tar.md5
Disconnect the Galaxy Music from PC if it is connected.
Boot your Samsung Galaxy Music into Download Mode: (The image below of Galaxy Trend will help)
Power off your phone first and wait for 6-7 seconds after display is off
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Music as said above.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 2) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Music from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Music from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 6 of this guide again.
FEEDBACK US!Your suggestions and queries, if any, are most welcomed!
Latest Clockworkmod (Cwm) Recovery For Samsung Galaxy Nexus (Gsm) One Click Installer
The latest version of ClockworkMod Recovery is out for the International version of Samsung Galaxy Nexus which not only brings cool features but also compatibility with Android 4.4 ROMs like CyanogenMod 11, ParanoidAndroid, etc.
So, even though TWRP not being able to cope up with KitKat, we are not out of options. At the time of writing, the latest version of CWM for International GSM variant of Galaxy Nexus is 6.0.4.3.
So, you shouldn’t get the pesky ‘set metadata recursive’ error with this version of recovery while flashing Android 4.4 base ROMs.
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-i9250! The process here is not for other variants of Samsung Galaxy Nexus, like: GT-i515, GT-i516, GT-L700, i9250T, etc.
Do not use the procedures discussed here on any device of Samsung or any other company. You have been warned!
BEFORE YOU BEGIN..
You must do this pre-installation stuff before attempting to install CWM recovery on your Google Galaxy Nexus GT-i9250 in order to avoid any complications later, and have a smooth and successful process.
BACK UP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
INSTALL GALAXY NEXUS DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully install a firmware on your Galaxy Nexus GT-i9250. In case you’re not sure, follow the link below for a definitive guide for installing driver for your Galaxy Nexus on your computer.
► GALAXY NEXUS DRIVERS (ADB and Fastboot) INSTALLATION GUIDE
CHARGE YOUR DEVICEIf your android device powers off due to lack of battery while the process is underway, it could damage the device.
So, make sure your device is adequately charged — at least 50% battery of the device.
GUIDE: SAMSUNG GALAXY NEXUS GT-I9250 CWM RECOVERY
DOWNLOADS
Download the either of the Installer file, for Touch edition and Non-touch edition of CWM recovery for your Galaxy Nexus.
File name: samsung-galaxy-nexus-gt_i9250-touch-cwm-recovery-installer.zip (7.3 MB)
File name: samsung-galaxy-nexus-gt_i9250-cwm-recovery-installer.zip (7.3 MB)
STEP-BY-STEP GUIDE
You need to unlock bootloader of your Galaxy Nexus GT-i9250 first to be able to install CWM recovery. Since unlocking bootloader would completely wipe (delete everything) on your Galaxy Nexus, be sure to backup your phone adequately before attempting to unlock bootloader and install custom recovery. Link – GALAXY NEXUS BOOTLOADER UNLOCKING GUIDE.
Prepare your phone:
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options.
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section).
Extract the installer file (using 7-zip, preferably). For touch edition, it’s samsung-galaxy-nexus-gt_i9250-touch-cwm-recovery-installer.zip. And for Non-touch edition it’s samsung-galaxy-nexus-gt_i9250-cwm-recovery-installer.zip. You’ll get the following files, and one folder:
api (folder)
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
fastboot.exe
recovery-clockwork-6.0.4.3-maguro.img (or) recovery-clockwork-touch-6.0.4.3-maguro.img.
source.properties
Try booting into recovery to verify if CWM recovery has been installed successfully:
Switch off your Galaxy Nexus.
Press and hold ‘Volume Up + Volume Down + Power’ buttons together to boot into bootloader/fastboot mode
Press Volume Down until the Start button changes to Recovery Mode, then press Power button to reboot into recovery mode.
That’s all!
Your suggestions are most welcomed.
How To Boot Into Samsung Galaxy Ace Duos Recovery Mode
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Galaxy Ace Duos in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Galaxy Ace Duos. Others are software based, let’s have a look them below:
1) Boot into Galaxy Ace Duos Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
└ This is completely optional. You can choose to keep the device switched On if you wish to
Press and hold ‘Volume Up + Home + Power’ buttons together and release them as soon as you see the Galaxy Ace Duos logo on your phone’s screen.
Your phone will boot into recovery mode. Use Volume buttons to navigate Up and Down between options and use Power button to select an option in recovery.
[ad1]
2) Boot into Galaxy Ace Duos Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Galaxy Ace Duos Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
How A Custom Recovery With Twrp Works On Android
Gaining root access is the first step towards truly customizing your Android device. However, root alone will only let you install root-only apps and custom recoveries, but won’t offer anything of its own to help you customize items on your phone.
To actually install something that customizes your phone, you’re going to need something called a custom recovery. TWRP recovery is one of these custom recoveries for Android that lets you install a ton of custom developments on your Android based devices.
Table of Contents
You’ll see how to install and use it in the following guide.
What Is TWRP Recovery?Custom recovery with TWRP was developed for Android devices. When you install it on your device, it replaces the stock recovery and gives you additional features that weren’t present in the stock one.
It’s an open-source project and is available for a number of Android-based phones and tablets. You can grab yourself a copy of it for your specific phone model and flash it away to enjoy many of its features on your device.
How To Install a Custom Recovery With TWRP On Android?To install a custom recovery with TWRP on your Android device, you have two ways to do it. What method you use to install it depends on your specific model’s root requirements.
Certain phones first require you to install a custom recovery on them and then gain root whereas some other phones must first be rooted before you can install a recovery on them. The following sections should guide you what method you should be using to install TWRP on your phone.
Use TWRP App To Install The RecoveryIn most cases where your phone is already rooted, you can use the TWRP app to install the custom recovery on your device. This is an easier and quicker way to get a custom recovery up and running on your phone as it does all the flashing procedures by itself.
Launch the Google Play Store on your device, search for Official TWRP App, and install it on your device.
Launch the app and tap on the option that says TWRP Flash.
Choose your device model from the dropdown menu on the following screen and tap on Flash to Recovery.
It’ll download and flash the TWRP custom recovery image to your phone’s recovery slot.
Use Fastboot To Install TWRP RecoveryIf your device first requires you to install a recovery and then you can root it or if the app method doesn’t work for you for some reason, you can manually flash the recovery image on your device using Fastboot.
Fastboot helps you replace the stock recovery on your device with a custom one and you only need to run a command to do it.
The TWRP recovery should be installed on your Android device.
How To Enter The TWRP Recovery Mode On Android?Since a custom recovery isn’t a regular app, it won’t be available in your app drawer for you to launch it. You’ll need to either press a key combination to get into the TWRP recovery mode or run a command to reboot your device into the recovery.
Both methods should do the same job and it depends on what you’re comfortable doing. You’ll probably not want to use the key combination when you’re running commands and similarly you won’t want to use a command when you aren’t using a command utility.
Using Key Combination To Enter The TWRP Recovery ModeThe key combination to enter the recovery mode varies by the device you have. Something that works for a Samsung device may not work for a Pixel phone, and so on.
On most phones, though, you can press the Volume Down and Power buttons at the same time to reboot into the bootloader. Then you can select the Recovery option and enter the TWRP recovery mode on your device.
On some other phones, you can immediately reboot into the recovery by pressing the Volume Up and Power buttons at the same time.
Using ADB To Reboot Into The TWRP Recovery ModeThis method should work for all the devices that support ADB and Fastboot. You basically need to run a command and it’ll reboot you into the recovery.
You’ll see various options when your phone reboots into the recovery.
How To Use The TWRP Custom Recovery On Android?In most cases, you’ll only be using the following features of the TWRP custom recovery on your Android device.
InstallIt’ll let you flash various custom files including custom recoveries, root files, custom kernels, custom ROMs, and so on. You’ll be using this option the most.
WipeThis will let you wipe off the data on your device and factory reset it. You can use it in case the option in the default Settings app doesn’t work.
BackupThis lets you create a full backup of your Android device. It can include all the contents of your phone.
RestoreThis allows you to restore the backups you’ve created before on your device. You need a single-tap and all of your data is restored on your phone.
Unbrick Verizon Galaxy S3 Using Odin
The Verizon Galaxy S3 has to be the most problematic variant of the Galaxy S3. If the locked bootloader on it wasn’t enough, many users have seen their Verizon Galaxy S3 get bricked and stop booting after trying to flash a custom ROM, making it a very expensive paperweight. Normally, the only way to fix this is to send the phone it to Verizon, and probably also pay the full price of the phone for a replacement.
However, thanks to XDA Recognized Developer PureMotive, we can now fix a bricked Verizon Galaxy S3 and get it running again just like new. The procedure involves flashing a few files that fix the device’s bootloader and make it work normally again, and the guide below will walk you through it with step-by-step-instructions.
Something important to note is that the procedure is quite long, and if not followed properly, it will not work. So read instruction carefully, twice if you have to, and your phone will be fixed and running again in no time.
Now let’s take a look at how the Verizon Galaxy S3 can be unbricked.
How to Unbrick Verizon Galaxy S3
Download Drivers
Extract the chúng tôi file to a convenient location on the computer to get a folder named Odin307 with 4 files inside.
Download the following files:
VRALEC.bootchain.tar.md5
BOOTLOADER_I535VRALF2_618049_REV09_user_low_ship.tar.md5
Open this file in a torrent application like µTorrent to download a file named stock.vzw_root66.7z. After downloading the stock.vzw_root66.7z file, extract it to get a file named stock.vzw_root66.tar (use a software like 7-zip to extract).
Make sure phone is off. Boot into download mode. To do so, hold down the Volume Down, Home and then the Power buttons together until a Warning!! message is displayed on the screen. Here, press Volume Up to enter download mode. A green Android and the text Downloading will be displayed on the screen.
Then, connect the phone to the computer with the USB cable and wait for Windows to finish installing drivers. Odin will say Added!! in the message box on the bottom left if the phone is detected successfully. If not, make sure the drivers are installed and also try using a different USB port – preferably a USB port on the back if using a desktop computer.
Wait till flashing is complete and you get a PASS message in Odin. When that happens, disconnect the phone from the computer, but DON’T turn it off and let it stay in download mode. Also close Odin.
Reconnect your phone to the computer (while it is in download mode). Open Odin again.
When flashing is complete and you get a PASS message, disconnect the phone and close Odin. But keep the phone in download mode, don’t turn it off.
Open Odin again and also reconnect the phone to the computer.
The phone will still not boot up completely. Now, remove the battery on the phone, then re-insert it. Don’t turn it on.
In recovery, use the volume buttons to scroll up/down and the home button to select options.
Select wipe data/factory reset, then select Yes on next screen to confirm. Wait a while till the data wipe is complete (this will NOT delete your personal files on the SD cards).
Select wipe cache, confirm, then wait for cache wipe to be completed.
Then, select reboot system now to reboot the phone.
The phone will now boot up properly into Android and is fixed, and you will be able to use it now.
Your Verizon Galaxy S3 is now fixed, and has saved you from sending it in for repair to Verizon. Do let us know how the procedure works!
Update the detailed information about Twrp Recovery V2.6.3.0 For Samsung Galaxy S3 Mini Gt on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!