Trending February 2024 # Should You Sleep, Hibernate Or Shutdown Windows Pc At Night? # Suggested March 2024 # Top 11 Popular

You are reading the article Should You Sleep, Hibernate Or Shutdown Windows Pc At Night? updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Should You Sleep, Hibernate Or Shutdown Windows Pc At Night?

A question most energy-conscious folks have! Should I hibernate or shut down my Windows 11 or Windows 10 computer at night? Which is better? In this article, we explore both options, and then you can decide for yourself.

When to Sleep, Hibernate, or Shutdown PC?

If you’re a Windows user, Microsoft suggests that you just set up your PC to “hibernate” overnight. “Hibernate” powers down your monitor to about 5 watts of energy and your PC to 2.3 watts—virtually the same as turning your PC off (your monitor uses zero watts when turned off. Either way, you save as much as $90 a year in power costs compared to a PC left on with a 3-D screen saver running.

If you used the “hibernate” feature of Windows XP (and previous versions including Windows 2000 and Windows Me), or even the “sleep” feature of most new Dell and other PC models, it really did not matter much – if you shut down or hibernated.

Even the folks at Energy Star agree you save almost as much energy as you do turning off your computer for the night (minus unplugging it). And you won’t have to endure a lengthy “re-booting” process the next morning; your computer should “wake up” in 30 seconds or less.

Those at Energy Star still prefer that you turn your computer off at night, for maximum energy savings. “We are all about energy savings, and when you shut off your computer at night, you save the most energy,” says Craig Hershberg, program manager for office equipment and consumer electronics. “Every little bit helps. It all adds up.”

Read: Difference between Sleep, Hybrid Sleep & Hibernation.

When to use Sleep Windows PC

Use Sleep if you plan to stay away from your PC and maybe not work for a couple of minutes or hours. This uses very little power, your PC starts up faster, and you’re instantly back to where you left off. On desktops, you may use the Sleep option instead, on the latest PCs which have a Hybrid sleep feature. It is a combination of sleep and hibernates; it puts any open documents and programs in memory and on your hard disk and then puts your computer into a low-power state so that you can quickly resume your work.

When to use Hibernate Windows PC

Use Hibernate during the night and when you plan to work again the next morning. Hibernate uses less power than sleep and when you start up the laptop again, you’re back to where you left off quickly.

When to Shut down Windows PC

Use Shutdown at night if you do not plan to use the PC for the next 1 or more days. Shutting down the PC once a week is always a good idea.

However, here are some consumer “myths” that are worth addressing:

Turning your PC off uses more energy than leaving it on. Not true. The small surge of power you use when turning it on—which varies per PC make and model—is still much smaller than the amount you use in keeping it on for lengthy periods.

Screen savers save energy. Not true. Screen savers, at a minimum, can use 42 watts; those with 3-D graphics can use as much as 114.5 watts. It’s absolutely wrong thinking that a screen saver will save energy.

Your computer uses zero energy when “off.” That’s true only if it is unplugged. Otherwise, the PC utilizes “flea power,” or about 2.3 watts, to maintain local-area network connectivity, among other things. In “hibernate” mode, your PC uses the same 2.3 watts; in “sleep” mode, your PC uses about 3.1 watts. Monitors do use zero energy when turned off.

What do you do normally? I usually Hibernate every day, but make it a point to shut down on weekends or when I am sure that I’m not going to be using my PC the next day.

Read next: Should I turn off my Router or WiFi Network when not in use?

You're reading Should You Sleep, Hibernate Or Shutdown Windows Pc At Night?

Windows 11: Pc Won’t Go To Sleep Mode

Having problems with your Microsoft Windows 11 computer sleep mode? This tutorial will tell you what to do when your Windows 11 PC won’t go to sleep mode.

People who need to take frequent breaks from their computer work prefer to put their PC into sleep mode. It saves them from shutting down and rebooting the computer time and again. Moreover, sleep mode consumes less energy than an awake computer.

But, what if your PC won’t go to sleep mode? Sound irritating, right? The experience itself is equally irritating. Since you’re reading this article, I presume you’re having the same problem. For this reason, this article will discuss the popular methods to fix the Win 11 PC won’t sleep issue.

What Is Sleep Mode in a Windows 11 PC?

Sleep mode is also known as the standby mode that helps you reduce the energy consumption of your electronic device. This built-in feature of all Windows versions also saves the effort of manually shutting down and starting the computer. When you put your Windows 11 PC in sleep mode, your computer’s hard disk and monitor shut down.

However, the memory of the PC stays on by drawing minimal power from the onboard battery. When you awake the PC by pressing any key or moving the mouse, the RAM sends a signal to the other parts of the computer to start functioning. As a result, your PC becomes ready for work much faster than it would have after rebooting.

Now, let’s move to the methods you need to perform to ensure that your Windows 11 computer goes to sleep.

Method 1 – Enable Sleep Mode

The first thing you should do to ensure your PC goes to sleep is to enable sleep mode. Unless you have this feature enabled for your computer, it won’t go to sleep no matter what you do. here are the steps you need to follow for enabling Windows 11 sleep mode.

Press Windows + I to access Settings.

Under the Power section, expand Screen and sleep.

There will be two options for your PC to go to sleep: battery power and plugged in.

Set a time for each situation to ensure the PC goes to sleep when it’s idle for a particular time.

Method 2: Make Changes in Advanced Power Option

In the search field, type control.

Select Hardware and Sound option.

Under the Power Options section, choose Change when the computer sleeps hyperlink.

On the Power Options window, expand each setting to make sure they allow the computer to go to sleep mode. For example, under the Multimedia settings, sleep mode was disabled for When sharing media option. You need to set this to Allow the computer to sleep.

Method 3: Stop Sensitive Mouse From Interrupting Sleep Mode

These days, we use highly sensitive mice. However, most of us are unaware of the fact that this sensitivity is the reason the computer fails to go to sleep mode or won’t stay in sleep mode for the intended time. What happens in the case of such mice is that they respond to any kind of vibration around the device and as a result, offer a false signal about not being idle.

If you don’t want your mouse to disturb your sleep mode plan for your Windows 11 computer, you need to make sure your mouse doesn’t make the computer active whenever it feels any vibration around it. For that, here are the steps you need to perform.

In the search field of the taskbar, type device.

Open Device Manager.

Expand the Mice and other pointing devices section.

Select the Power Management tab.

Uncheck the Allow this device to wake the computer box

Method 4: Change Network Adapters Settings

Do you know that network adapters can send your computer signal to stay awake even when no one is using it? That’s right!

Press Windows + X keys together to open the Quick Access list.

Select Device Manager from there.

All the connected Network adapters will be listed there.

In the Properties window, select the Power Management tab.

Uncheck the box for Allow this device to wake this computer option.

Method 5: Disable Hybrid Sleep

Hybrid sleep is a combination of hibernation and sleep. If you’ve got hybrid sleep enabled for your computer, it’ll override your regular sleep mode settings. As a result, your Windows 11 PC won’t go to sleep mode. Therefore, it’s mandatory to disable the hybrid sleep mode so that your computer can easily go to sleep mode according to your regular setting.

Type Control in the search field.

Select Control Panel.

On the Power Options window, expand the Sleep option.

Method 6: Turn Off Screen Saver

Some of us still love to use the screen saver on our Windows 11 PC and there’s no harm in it. Except when you want your computer to go into sleep mode when it’s idle. The sleep mode and screen saver settings can collide and as a result, your Windows 11 PC won’t go to sleep mode. To fix this problem, you need to disable the screen saver to find out if it’s the reason your computer doesn’t go to sleep as per your settings.

Press Windows + I to navigate to Settings.

Select Personalization from the left panel.

Select (None) from the drop-down menu.

Method 7: Try Power Troubleshooting

If none of the above methods work for you and your computer still doesn’t go to sleep mode normally, you have to try power troubleshooting. This in-built program is capable of fixing different Windows computer issues. Hence, it’s always a good idea to give it a try when all other approaches fail.

Press on Windows + I keys to open Settings.

Select Troubleshoot from the right pane.

Follow the prompts on the screen to complete the troubleshooting process.

Now, check if the PC goes to sleep or not.

Additional Method: Make Sleep Option Visible

Many users complain that they’re unable to find the sleep option in the power menu. Without the option, it’s not possible to manually put the computer into sleep mode. To make the sleep option visible on your power menu, you need to make changes in the Local Group Policy Editor. For that, you need to perform the following steps on your Windows 11 computer:

Press Windows + R keys simultaneously to open the Run dialog box.

Type chúng tôi on that box and hit Enter.

This will open the Local Group Policy Editor window before you.

From the left panel, select the following options chronologically:

Next, select Enabled or Not Configured radio button.


Sleep mode is a great way to save energy while keeping your computer in standby mode. For Windows 11 users, PC won’t going to sleep is an annoying problem. Here, I’ve mentioned some useful and effective methods to fix Windows 11 computer sleep issues.

3 Best Ways To Enable Or Disable Hibernate On Windows 11

One of the niftiest (if not the most) features available on Windows 11 is the hibernation mode. Although it is not available outright by default, enabling it can help you save your battery, if you are working on a laptop, and manage your system’s power consumption efficiently? If these questions are popping into your head, we’ve got you covered.

Our detailed guides below will take you through all the bits and pieces of this wonderful feature and familiarize you with its workings and most importantly, how to turn it on.

What is the hibernate mode in Windows 11?

Just like its definition in the dictionary, the hibernate mode in Windows 11 puts your system in a low-power mode, somewhat similar to sleep mode. However, unlike sleep mode, the hibernate mode consumes less power and preserves battery life. When put on hibernation mode, your system shuts down all background activity, and ongoing work before taking a “snapshot” of data and saving it onto your hard drive. The next time you turn on your system, you can automatically resume your previous work right where you left off without any hindrance.

This is particularly useful if you are not actively using your device or are starting to run low on power if you are working on a laptop. So, let us now go through the different ways through which you can enable this handy feature on your system.

Related: Top 8 Ways to Disable Notifications on Windows 11 (and 3 Tips)

How to enable hibernate mode in Windows 11

in 3 ways

As mentioned before, the option to enable hibernate mode is not available by default in Windows 11. We will have to turn it on manually using three (well, technically five) different methods. Every method presented in this guide is 100 percent safe and should get you into hibernation mode in no time at all. Let’s get started.

Method 1: Using Control Panel

The Control Panel allows you to fiddle with many different settings of your system, hibernation mode included. There are three ways you can achieve this. Let us go through them, one by one.

On the left-hand tab, select Choose what the power buttons do.

Tip 1: Configuring Hibernate on the Sleep or Power button

This method is very similar to the previous one. Using this method you can simply choose to go into hibernation mode at the push of a button – the power button on your system, to be specific.

Follow the steps from the previous method to access the Control Panel and open the power options menu. Now select Choose what the power buttons do.

Whenever you press your power button, your system will automatically revert to hibernate mode from now on.

Tip 2: Hibernate when ‘closing the lid’

This time, choose Hibernate from the drop-down menu next to the When I close the lid option. Save your changes and you should be all set.

Related: How to Disable Onedrive on Windows 11

Method 2: Using Command Prompt

If using the Control Panel method is a little too long or bothersome, you can turn to Windows Command Prompt to get the job done. In the Windows Start Menu or the Search Menu, type Command Prompt in the text box and hit enter. From the search results, run Command Prompt as administrator.

Now, type in the following command and hit Enter to enable hibernate mode:

powercfg.exe /hibernate on

Related: How to Stop Popups on Windows 11

Method 3: Using Windows Registry

You can also use Windows Registry if the previous methods don’t have the desired results. Press the Windows+R key to bring up the Run dialog box. Type in Regedit and press OK to open the Windows Registry Editor.

Now that you have access to the Registry Editor, navigate to the following link: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPower.

You will have to scroll a fair way down to find the Power link.

You will have to restart your system for the changes to take effect. Once restarted, you will find that hibernate mode is enabled on your system when you access the Start Menu.

How to change ‘hibernate after’ duration

Should you choose to, you can set a specific timer after which your system will automatically go into hibernate mode. To access this feature, you will need to open the Control Panel and go to System and Security.

Now select Power Options to access power settings.

Select Change Advanced power settings.

Your system will now automatically hibernate after a set time limit of inactivity.

How to “wake up” the system from hibernation

You can wake up your PC from Hibernation mode by simply pressing any key on the keyboard or using your mouse. If you are using a laptop and have shut the lid as the system hibernated, simply opening up the lip would wake up your device from hibernation mode. In case this does not work, pressing the power button should do the trick.

How to disable hibernation mode in Windows 11

in 3 ways

Disabling hibernation mode in Windows 11 is as simple as retracing the steps you took to enable it. Going back and reverting the changes you have made should disable hibernation mode. We have already discussed five ways to turn on hibernation mode in Windows 11, which means that there are five different ways we can turn it off.

Method 1: Using Control Panel

You will need to access the Control Panel again for this method. Use the Start Menu or Search option to open Control Panel.

From the next window select, Systems and Security

Now go to Power Options to bring out the power options menu.

From the left-hand panel of the new window, select Choose what the power buttons do.

In the new window that appears, select Change settings that are currently unavailable.

Tip 2: Disable hibernate on the Power or Sleep button

Tip 2: Disabling Hibernate when ‘closing the lid’

Select Save Changes to disable hibernate mode whenever you close your laptop lid.

Method 2: Using Command Prompt

Command Prompt can be used to turn hibernation off in the same way we enabled it. In the Windows Start Menu or the Search Menu, search for Command Prompt and run it as administrator.

Type in the following command and hit Enter to disable hibernate mode:

powercfg.exe /hibernate off

Method 3: Using Windows Registry

Open the Run dialog box by pressing the Windows+R key. Type Regedit and press OK to open the Windows Registry Editor.

Navigate to the following link in the Registry Editor: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPower.

Scroll down to find the Power link.

Troubleshooting common Hibernation issues on Windows 11

Putting your system in hibernation mode should not cause any problems; rather, it should a handy feature that enhances your experience. Nevertheless, some issues may pop up from time to time when it comes to waking up systems from hibernation mode. These common problems can be easily handled and discharged with the right knowledge. Therefore, we have provided a comprehensive troubleshooting guide to common hibernation issues in Windows 11.

In case your system refuses to wake up from its hibernation mode, you may have to remove the laptop battery to enable a proper discharge of power. Once you have removed the battery, press and hold the Power button for 30 seconds. Now return the battery to its position and connect your laptop to a power supply. Pressing the power button will restart your system and wake it up from hibernation mode.

You can also try pressing and holding the power button down for 10 seconds to wake the system from hibernation mode.

Another common method is to remove the battery and connect the laptop directly to a power supply and power it up. This should restart the system without any issues. You can then proceed to shut down the system, replace the battery and resume your work.


Here are our answers to the common queries about hibernation on Windows 11.

Advantages of using Hibernation mode

In the worst-case scenario where your system shuts down while in hibernation mode due to a depleted battery, your work will have been saved and not lost. This is extremely useful if you know that your laptop’s battery is running out and there is no viable option to recharge it. In such cases, one can simply put the system on hibernate till the time you have the opportunity to charge and resume work again.

How to make my laptop hibernate when I close it?

You can now make your laptop hibernate by simply closing the lid. You can do so by accessing the control panel and going to the power options menu. Now choose the option called Choose what the power buttons do. In the new window that opens up, you can set your laptop to hibernate when you close the lid. You can follow our step-by-step guide with screenshots about this above — take a look at tip #2 under method 1 above. 

Why hibernate option is not available?

The hibernate option is not available by default in Windows 11. The user will have to manually enable it either from the Control Panel or the Command Prompt or the Windows Registry. All three methods are perfectly viable and it is a matter of personal preference. We have covered all three methods in their entirety in the guide presented above. A quick read-through will familiarize you with the processes and allow you to access the hibernate option in no time. 

Is Hibernate better than shutdown?

Hibernate is useful when you need to conserve battery power but are still working on your laptop. For example, if you are working on a project and you know that charging will be a problem in the coming days, you can choose to hibernate your system when not working to save on your battery. This allows you to come back and resume your work without your system having to shut down completely due to a depleted battery. In hibernation, your system is still technically on but it consumes very little power so it is a very handy power saving method, useful when you are in a pinch. 

Shut down on the other hand completely powers off your system. This means that it ends all the applications and background activities. It also clears all the memory so resuming your work when you restart like in hibernation is not possible. It is, however, recommended to shut down your system once you are done with your work to allow clearing of the memory. This can in turn provide additional gain in performance and speed.

Related: How To Enable TPM 2.0 and Secure Boot in BIOS for Windows 11

Hibernate vs Sleep mode: How does it work?

Hibernate and sleep mode in Windows 11 are two very similar yet vastly different features. Both have their uses and work differently. Sleep mode is a power-saving mode that the system goes into. It can be comparable to pausing a video or a movie one is watching, only to resume it after a while.

In sleep mode, the system goes into a low-power state and closes all activities – background and opened ones – and all data is transferred to the memory. The system is technically still on but uses very little power in this mode. Upon resumption of normal operations, the system resumes a full-power mode within seconds, making it a viable option if the user is planning to take a short coffee break, for example.

Hibernation mode is similar to sleep mode in the sense that it also goes into a low-power setting but unlike sleep mode, the system stays off once it enters this mode. This means that the system does not consume any power in this state and is very handy especially when the battery power gets dangerously low and charging it is not an option. Hibernation mode was created mainly for laptops that run on battery power and as such may not be found on all PCs.

Which is better, hibernate or sleep?

It depends on how long you are going to be away from your system and even your current power situation. sleep is useful when you need to step out for a quick break from your work and will be resuming shortly. Sleep also consumes significantly more power than hibernation so this is something to keep in mind. While the resumption of work is quicker than sleep, the downside is the battery drainage.

You can use hibernate when you know you will be away from your system for a while but would like to resume your work when you open it again. It is also very handy especially when faced with low battery power. Hibernation will save all your work and then shut off the system to conserve battery. You can then carry your system with you until you reach a charging point where you can safely plug in and resume your work.

It is all dependent upon the user’s situation and requirements. Remember, use Sleep for short periods of inactivity and use Hibernate for longer periods where you need to save battery power too.

How do I know if hibernate is enabled?

Is hibernate good for my laptop?

Can hibernate mode harm my laptop?

Hibernation is perfectly safe for your system. It is essentially a clean and controlled shutdown of your laptop but with your active sessions or work being saved. This allows you to quickly resume your work without having to start from scratch again and is very useful to individuals who work on projects that require continuous work to be done, repeatedly. However, since hibernation saves all the data to the hard drive, it is recommended that you perform a complete shutdown and restart now and then to prevent issues related to unnecessary cache build-up and resource management. Routine startups will also enable Windows to download and install pending updates and keep your system up to date with the latest build.

How to add hibernate in Windows 11?

The hibernate option is available on Windows 11 but is not enabled by default. However, we have provided three ways above to enable the hibernate option in Windows 11 easily. The first method, using the Control Panel, is the easiest but if that doesn’t work for you for some reason,. using command prompt or Windows Registry Editor are the two other ways to go about it.


Inscryption Keeps Crashing Or Freezing On Windows Pc

This post covers different workarounds you can try if Inscryption keeps crashing or freezing on your Windows PC. Developed by Devolver Digital, Inscryption is a popular card-based deck-building video game available for PC. Since its release on Steam, the game has mainly received positive reviews from critics. But this doesn’t mean it is free from problems. As reported by users, the game is crashing on their Windows PC. There’s nothing to worry about if you are also facing the issue; we got you covered. Try the below-listed solutions to fix the crashing problem on your Windows PC.

Inscryption keeps crashing or freezing on PC

Here are all the effective solutions you can try if Inscryption keeps crashing or freezing on your  Windows 11/10.

Ensure the system matches the minimum requirement

Close unnecessary background running applications

Run the game in administrator mode

Download the latest Graphics Driver update

Enable Game Mode

Run Inscryption on dedicated GPU

Whitelist Inscryption from Windows Firewall

Verify Integrity of Game Files

Reinstall the Game

Now let’s check out all these solutions in detail.

1] Ensure the system matches the minimum requirement

Although, Inscryption is a comparatively new game, but it can easily run even on a low-end device. However, if you have an extremely old system, you might face a compatibility issue. Check out the minimum requirements to run Inscryption on Windows.

Minimum requirements

OS: Windows 7

Processor: Intel Core i5-760, AMD Athlon II


GPU: GeForce GTX 550 Ti, Radeon HD 6850 (1024 VRAM)

Free space: 2 GB available space

If your system doesn’t match the minimum requirement, you will face a crashing issue. And in this case, you can’t do anything other than upgrading your system. But on the other hand, if your system matches the requirement, and still the game is crashing on your system, there can be some issues on your system. Continue with the troubleshooting guide to fix the problem.

Fix: chúng tôi is not responding or has stopped working

2] Close unnecessary background running applications

Unnecessary background running applications can be the major reason triggering the crash issue. The situation applies especially to those users who have low-end devices. As it turns out, different applications running in the background will consume the system resources, which will automatically result in a game crash. Close all the background running applications using the Task Manager to fix the problem.

See: Fix WWE 2K22 keeps crashing on PC after startup

3] Run the Game in administrator mode

That’s it. Now launch the game and check if you’re still facing the problem. If yes, try the next solution on the list.

4] Enable Game Mode

Windows 11/10 comes with a dedicated gaming mode feature. You can enable it to enhance the gaming experience. It optimises the PC by turning things off in the background, and it will automatically fix the crashing problem. Here’s how you can enable Game Mode on Windows PC.

Open the Settings menu using the Windows + I hotkeys.

In the following window, enable the Game Mode toggle.

Now, launch the game, and check for the problem.

See: Dota 2 keeps crashing or freezing on Windows PC

5] Download the latest Graphics Driver update

Not only Inscryption, but you will also face problems in different applications if you haven’t downloaded the latest graphic driver update. You need to have the latest drivers installed on your system to run the game without any issue. So, here’s how you can download the latest graphic driver update on Windows 11/10.

Alternatively, you can visit the official device manufacturer’s website to download the drivers.

6] Run Inscryption on dedicated GPU

The next thing you can try is to run the Inscryption on a dedicated GPU. You can do so by following the below steps.

Open the Settings window by pressing Windows + I shortcut key.

Locate Inscryption, and tap on it.

Select High performance in the following window.

Now, check if the problem is solved or not. If not, try the next solution on the list.

See: Kena Bridge of Spirits keeps crashing on Windows PC

7] Whitelist Inscryption from Windows Firewall

It has been noticed that Windows Firewall interferes in the game’s launch and cause the crashing issue. To solve the problem, you will have to allow the game from the Windows Firewall. Also, temporarily disable any third-party antivirus program installed on your system while running the game.

8] Verify Integrity of Game Files

Corrupted game files can be another major reason behind the crash problem. But thankfully, you can resolve the issue using the Verify integrity of game files feature of Steam. Here’s how it’s done.

Now, look for Inscryption from the list of installed games.

Let the verification process be complete, and once done, relaunch the Inscryption and see if the issue is now resolved.

9] Reinstall the Game

If you are still facing the problem, you are left with no other option than to reinstall the game. The crashing issue can be caused due to installation error. So, reinstall the game carefully to fix the problem.

Why does my game keep crashing PC?

If games keep crashing on your Windows PC, then it indicates that you haven’t downloaded the latest Graphics Driver update. Most modern games require the latest graphics driver to run without any issue. Along with this, the problem can also occur due to corrupted game files.

Why do my games keep crashing on startup?

If your system isn’t compatible with the game’s minimum requirement, you will face the crashing issue during startup. Whereas, if the game was working fine earlier but has started to crash now on startup, it indicates that the game files have been corrupted. You can solve this problem using the Verify integrity of game files feature of Steam.

Read Next: Fix Fortnite keeps crashing or freezing on Windows PC.

Ipad To Apple Tv, Mac Or Windows Pc

Airplay Mirroring is a fantastic feature of iOS present on the iPhone and iPad. It lets you mirror your iOS screen’s device, and basically everything that you do on it, to an Apple TV or a Mac computer. This turns out to be a incredibly useful feature while doing presentations and demos, creating screencasts or videos, or if you just want to showcase your iPad/iPhone photos on a bigger screen.

And the best past: Airplay Mirroring is incredibly easy to use as long as you have the right setup and software. Here’s a quick rundown of what’s needed and how to use Airplay Mirroring on the iPhone and iPad.


1. An iPhone 4S/ iPad 2 or newer, running iOS 5 or any later version of iOS.

2. If you want to mirror to Apple TV: a 2nd gen or 3rd gen Apple TV running software version 5 or later.

3.If you want to mirror to a Mac: OS X Mountain Lion (or later) , a supported Mac, and an app to support mirroring. The list of supported Macs is:

iMac (Mid 2011 or newer)

Mac mini (Mid 2011 or newer)

MacBook Air (Mid 2011 or newer)

MacBook Pro (Early 2011 or newer)

Two main apps that allow you to mirror your iPhone/iPad screen to a Mac are Reflector  and Air Server . Both of these apps offer free trials, are available for $14.99 for a single user license, and have other licensing packages for multiple users. Both these apps also work on Windows PCs. I tried Reflector for iOS 6 and Air Server for iOS 7, and both seem to be really good.

4. A WiFi network. All devices taking part in the AirPlay Mirroring must be on the same local WiFi network.

Installing Your App

Installing these apps is very easy. Once you purchase (or try) these apps, a file will automatically download onto your PC/Mac. On Macs, the installation is very easy. All you have to do is drag the app into your Mac’s Applications folder, and you’re done. Once you open the app, it will ask you whether you want to try or buy the app. If you choose to try the app, Reflector has a limitation. It will automatically shut down after 10 minutes and will then need to be restarted. Also, after I had used Reflector 2 times, the app started telling me that my trial had expired. Try Air Server, that’s better.

On Windows, installing Reflector is nearly identical, with the only difference being you will need to allow Firewall access for the app.

How To Turn On AirPlay Mirroring On iOS 5 & 6

1. Open up the Multitasking Bar on your iOS device. This can be done by double-tapping the Home button. If you are on a iPad, you can open the multitasking bar by using a swipe up gesture from the bottom bezel, provided you have enabled multitasking gestures in Settings.

2. Now that you can see the multitasking bar, swipe on the recently used apps list from the left to the right. This will need to be done once on an iPad and twice on a iPhone. Swipe until you see the Airplay Mirroring icon.

3. Tap on the Airplay Mirroring icon. This will bring up a popover dialog showing you various devices that are available to mirror to on your WiFi network. Note that you will need to have Reflector or Air Server open on your PC/Mac for the it to be available to mirror to.

4. Tap to select either the Apple TV or the Mac and tap to toggle the Mirroring button below the device name to On.

How To Turn Airplay Mirroring On in iOS 7

1. Open up the Control Centre on your iOS 7 device. This can be done by swiping up from the bottom of the screen on the iPhone as well as the iPad.

3. Select the device you would like to mirror your iOS device’s screen to.

That’s it. This really is a superb feature that’s so easy to use.

Shujaa Imran

Shujaa Imran is MakeTechEasier’s resident Mac tutorial writer. He’s currently training to follow his other passion become a commercial pilot. You can check his content out on Youtube

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

This App Is Preventing Shutdown Or Restart (No Name)

Windows users have been experiencing an issue where their computers won’t shut down or restart because of an unknown app preventing it. This problem has been reported by users since Windows 10 and is still present in Windows 11. The error message displayed on the screen simply says “This app is preventing you from shutting down” or “This app is preventing you from restarting”. The frustrating thing is that there is no name associated with the app, only an icon.

It’s an annoying problem that can lead to forced shutdowns, data loss, and other issues. The issue often appears with an empty label that makes it challenging to identify the app that’s causing it. In this article, we will provide some solutions and recommendations that can help you identify and fix the issue of an unknown app preventing shutdown or restart.

The issue is that there is a process that has not terminated, so the operating system is preventing the shutdown or restart. Windows is aware of the process, but it doesn’t know how to display its name. This can be confusing and alarming to users, who might wonder if their computer has been hacked or infected with a virus.

The issue might be caused by a buggy feature in the operating system that prevents the display of the process name. It’s also possible that the process is a background executable that doesn’t have a “title bar” name, which is why Windows can’t display it.

Here are some recommended solutions that may help you fix the issue of an unknown app preventing shutdown or restart on Windows 11 and Windows 10.

To isolate the issue, try to disable all programs at Windows startup. However, the process of disabling all programs at startup can be time-consuming, especially if you have several programs running. If you have trouble identifying which programs to disable, you can use Microsoft’s built-in tool called Task Manager. Here’s how:

Press the Ctrl + Shift + Esc keys to open Task Manager.

Restart your computer and see if the issue persists.

If the issue stops occurring, try re-enabling the programs one by one and restart your computer to identify which program is causing the problem.

An unknown app preventing shutdown or restart may also be caused by a service that starts with Windows. Disabling all services on Windows startup can help you identify which service is causing the issue. Here’s how to disable all services on Windows startup:

Go to Start menu and type “msconfig“.

Select “System Configuration“ from the search result.

Check the “Hide all Microsoft services” option.

Restart your computer.

After restarting your computer, check if the issue is resolved. If the issue is resolved, you can enable the services one by one to identify which one is causing the issue. To enable a service, follow these steps:

Open the System Configuration window again.

Select the first service that you want to re-enable.

Restart your computer.

Check if the issue is still resolved. If the issue is resolved, you can move on to the next service. If the issue reoccurs, you have identified the service that is causing the issue.

Repeat the process for each service and startup program until you have identified the one that is causing the issue.

Note: The “Hide all Microsoft services” option is an essential step when disabling all services on Windows startup because it ensures that you do not accidentally disable any essential system services. Microsoft services are critical for the proper functioning of Windows, and disabling them can cause severe system issues. By checking the “Hide all Microsoft services” option, you ensure that only third-party services are disabled, leaving all essential Microsoft services enabled.

If you suspect that the unknown app preventing shutdown or restart is a virus or malware, run a full virus scan on your computer. You can use the built-in Windows Defender or any third-party antivirus program that you trust.

Select “Scan options” and choose “Full scan“.

If the scan detects any threats, follow the instructions to remove them.

It’s also a good idea to check if the unknown app comes with an icon that is not the default system icon. You can identify the app by reverse searching the icon. This will help you identify the app causing the issue.

If the previous solutions didn’t work, you can try closing apps from the system tray one by one and checking if the issue persists. The moment your computer shuts down, you’ll know which app caused it, and you can disable automatic startup for this app.

If you can’t identify the unknown app by its icon, you can try using Windows’ built-in resource monitor tool to identify the program that’s causing the issue. Here’s how:

Press the Win + R keys and type “resmon” in the Run dialog box.

Once you identify the process, you can either stop it manually or disable its startup.

If you can’t identify the unknown app causing the problem, you can use an alternative method to shut down your computer. Here’s how:

Go to Start menu and search for “cmd“.

Type “shutdown /s /t 0” and press Enter. This will kill the process and shutdown your computer.

Sometimes, an unknown app preventing shutdown or restart may be caused by pending Windows updates. The updates may contain bug fixes and improvements that can resolve the issue. Here’s how to check for pending updates:

Press Win + i to open “Settings”.

After installing the updates, restart your computer and check if the issue is resolved.

If the issue started occurring after installing a new app or making changes to your system, you can use System Restore to roll back your system to a previous point in time when the issue didn’t exist. After the system restore process is complete, check if the issue is resolved.

It’s important to note that you need to have a previously saved restore point. System Restore is a Windows feature that creates restore points at regular intervals or when significant changes are made to the system, such as installing new software or drivers. Restore points allow you to roll back your system to a previous point in time when the issue didn’t exist. If you don’t have a previously saved restore point, you won’t be able to use this solution. It’s a good idea to regularly create restore points so that you have a backup plan in case of any system issues.

The issue of an unknown app preventing shutdown or restart is a frustrating problem that can lead to forced shutdowns and data loss. If you’re experiencing this problem, don’t panic. There are several solutions and recommendations that you can try to fix the issue.

You can disable all programs and services at Windows startup, run a full virus scan, identify the unknown app by its icon or using Windows’ built-in resource monitor tool, or use the command line to shut down your computer. Remember to keep your system up to date, and if the problem persists, seek professional support.

Update the detailed information about Should You Sleep, Hibernate Or Shutdown Windows Pc At Night? on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!