Trending February 2024 # Is Your Laptop Fan Not Working? Here’s How To Fix It # Suggested March 2024 # Top 5 Popular

You are reading the article Is Your Laptop Fan Not Working? Here’s How To Fix It updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Is Your Laptop Fan Not Working? Here’s How To Fix It

Most Laptop use fans to cool components like CPU, GPU and motherboard by sucking in the cold air and expelling hot air through the vents. If your laptop fans are broken or not functioning at all, they could lead to problems like overheating and shutdown. Furthermore, your laptop may thermally throttle which will degrade its performance and shorten its lifespan.

Issues in fans arise due to reasons such as dust and dirt build-up. Or, sometimes the problem with the software side of things can also lead to this issue. You can resolve this issue by cleaning the fans and addressing mechanical failures that may need repairs or replacement.

This guide will give you insight on what may be causing your laptop fan to not work properly and how you can fix them.

Probable Causes of The Issue

Dust or dirt build-up

Physical damage

Fan control software issue

Outdated or corrupted drivers

BIOS issues

Some common reasons why your laptop fans have stopped working may be:

Fixes for Laptop Fan Not Working

There are several ways to fix the issue of Laptop fan not spinning. However, some manufacturers discourage users from repairing their devices by themselves or third-parties. This may void the warranty of your device. Please consult your device manufacturer or check their information page for details.

If you are in a position to get it repaired yourself, you can try these solutions to fix this issue.

Run Hardware Diagnostics or Troubleshooter

If your device has a faulty update, missing drivers, or installation of incompatible software, your fans may not receive proper operational instructions. This issue will cause the fans on your device to malfunction or cause them to not work at all.

For the user’s convenience, most laptops nowadays are equipped with troubleshooters and diagnostic programs that address hardware issues. They detect and isolate issues by performing scans and tests. 

To perform a diagnosis from Windows, follow these steps:

You can also run the hardware troubleshooter installed by your device’s manufacturer. Check the instruction manual provided or go to the manufacturer’s website for detailed information on how to  access the diagnostic software.

If any problem is not detected by the program, you can perform the following fixes listed below.

Reinstall or Change BIOS Settings

BIOS is the firmware that helps to control the operation of the fans in the system. If you have recently updated, reinstalled, or made any changes to your BIOS, check if the settings of your fans have been reset or disabled. 

To enter BIOS from Windows, hold the “Shift” key and restart your laptop. This will boot your device into recovery mode. From here, follow these steps:

If changing the settings in your BIOS does not fix the fans, you can try and update the BIOS. Follow our comprehensive guide on how to update BIOS safely.

The interface of the BIOS varies according to the manufacturer. Check user guides for further details on how to navigate and make changes in the BIOS. 

Note: Updating or flashing BIOS is a risky procedure. A failed BIOS install can make your device unusable. Make sure your device is connected to a charger before proceeding. 

Update Device Drivers

If the issue is because of device drivers, you can update the device drivers and check if it solves the issue of overheating.

Here’re the steps to update your drivers:

Change Fan Control Software Settings

Fan control software helps users fine tune at which temperature and speed the fan operates. It may come prepackaged with your device from the manufacturer or installed later by the user. 

If your device has any fan control software installed, it may be causing interference with your laptop’s fans from receiving proper instructions. Incompatible fan control software can also trigger the fans to behave erratically causing them to malfunction or cease completely. To fix this, 

Revert the fan control profiles back to factory settings

Update or uninstall

The fixes are specific to the fan control software. Check the software manual for details on how to change settings or remove them.

Check for Any Loose or Broken Connections

Laptop fans receive power from the motherboard. The headers that connect the fans to the motherboard may be wobbly or unplugged if your device has had any kind of impact or accident. Wires that carry power to the fans may also be damaged, loose, or broken.

To check for any loose and/or broken fan connections, firstly:

Before attempting any kind of hardware fix, make sure you are comfortable with opening the housing covers and working on your laptop. Most hardware faults require disassembly for inspection and repairs. 

Screwdrivers, pry tools, soldering materials, and cleaners are required to repair and clean the necessary parts of your laptop. Do not force open a laptop or attempt any repairs without proper tools and instructions beforehand.

Clean the Fans

The fans of a laptop are designed to keep your device cool by allowing air to flow through and out of the device. Using your laptop in an area without sufficient airflow can cause the vents to get blocked by accumulation of foreign particles. To keep your laptop cool, the fans run much faster which further damages them or render them useless.

Depending on the model, your laptop may have more than one fan. More powerful and capable laptops have more fans. They are usually separated for components like CPU (Central Processing Unit) and GPU (Graphics Processing Unit) because they produce the greatest amount of heat.

If your laptop has more than one fan, make sure to differentiate which fan cools which component before disassembling.

To clean the fans of your laptop, follow thses steps:

When cleaning your fans using compressed air, make sure that they are held down so that they do not spin. This step is to protect your fans from spinning too fast and damaging any components of the fan.

If you are using Isopropyl alcohol or any solution to clean your fan components, make sure that they are safe for electronics.

Note: After disconnecting the battery, drain your device completely from any remaining power by pressing the power button for 10 seconds. This is to ensure the laptop will not short circuit when using liquids to clean the fans.

Replace Any Broken Components

The components inside a laptop are prone to damage by shock, impact, or any sudden motion. Fans and other moving parts like hard disks are even more susceptible.

If the blades, bearings, or any component of your fans are broken, they need to be replaced. A broken fan component may cause more damage to your device’s internal parts by further breaking apart.

Wires, cables, and connectors need to be replaced if you do not have the necessary tools to fix them. Any damaged or torn-off components should also be either replaced or repaired as they may cause a faulty connection or short circuit the device.

How to Maintain the Health of Your Laptop’s Fans?

Moving parts like fans need to be serviced regularly to maintain performance and prolong usage. Your device also becomes less prone to issues and damages. You can maintain the health of your device’s fans by performing the following tasks:

These are some of the methods you can use in order to fix the fans on your laptop. If you are unsure or have doubts, please contact your device manufacturer or technician and send it for repairs.

You're reading Is Your Laptop Fan Not Working? Here’s How To Fix It

Internet Recovery Mac Not Working? Here’s How To Fix It

The Internet Recovery mode on Mac acts as a last resort when all other recovery options fail. However, it can sometimes stop working. In such a scenario, you may experience a grey screen, or the globe icon keeps revolving. 

Generally, it occurs when your internet connection is not working properly or is too slow. Likewise, a corrupted or deleted Recovery partition on the drive can also cause the problem. 

To help you fix the problem, we will introduce you to the probable causes and the methods to fix the issue.

If the Internet Recovery is not working on your Mac, it might be because of these reasons:

Bad internet connection

Mac is operating on pre-Sierra OS.

Faulty Keyboard

The corrupted or deleted Recovery partition on the drive.

You can fix the Internet Recovery problem by creating a bootable installer and using it in the Terminal app. Likely, resetting some Mac settings such as PRAM, NVRAM, and SMC also helps.

You can find a detailed and step-by-step guide to these fixes below. 

While using the Internet Recovery mode, the internet will play a great role since the system needs to connect with Apple’s server. Whether you are using Wi-Fi or an Ethernet cable, make sure that the internet is working fine, and the speed is good. If the internet is lagging and is slow, the download process will consume a lot of time. 

So, you can check the internet connectivity on your other devices and make sure it is working fine. Otherwise, you can restart the router to restart the router’s power cycle. 

To commence the Internet Recovery mode on your Mac, you need to use the correct method. To do so,

When you face the Internet Recovery problem on the Mac, one of the most reliable solutions would be to troubleshoot via a bootable installer. The method only requires you to enter a single command on the Terminal app. For that, you will have to enter createinstallmedia in the Terminal app. 

The createinstallmedia command varies based on the macOS version on your Mac. You can check it on Apple’s official site.

You can follow the steps below to create and install a bootable installer on your computer. 

It is handy to know that resetting the PRAM can solve apps and software problems. It can also help with the Internet Recovery problem. 

Here’s how you can reset the PRAM on your Mac.

Sometimes, the problem can arise when there are some internal issues in the system. So, you can reset the NVRAM by following these steps.

Shut down your Mac.

Then, when the computer is fully shut down, switch it back on by pressing the Power button.

Now, you need to press and hold the keyboard’s Command, Option, P, and R keys collectively as the Mac starts up.

You can release the keys once the system starts up. Make sure to listen carefully to the Startup chime sound. For newer models, do this until you see the Apple logo vanish for the second count. 

Doing so will successfully reset the NVRAM on your Mac. 

SMC handles essential functions such as power options, system indicator lights, etc. 

So, the problem with SMC can also create the issue we are talking about. Thus, you may consider resetting the SMC.

Shut down your Mac.

Unplug the computer’s charger and then eject the battery.

For about 5 seconds, keep holding the power button.

Now, insert the battery back into the Mac and plug the charger into your computer. 

Switch off your Mac.

Then, close the Mac lid. Leave it closed for about Half a minute. 

Next, switch on the computer. 

Sound Is Not Working On Lenovo Laptop: 5 Ways To Fix It

Sound is Not Working on Lenovo Laptop: 5 Ways to Fix it Rule out hardware issues if Lenovo sound is not working




Many Lenovo laptop owners reported that sound is not working in Windows 10, and drivers can cause that.

If your device has no sound

, update the drivers using specialized software.

You should also check the audio settings because they may influence the sound on your portable.

Changing the properties of your audio device can also fix this problem, so try that.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

If your Lenovo sound is not working, discover the best solutions by reading our thorough guide in its entirety.

Users have reported having sound issues with Windows 10 Lenovo laptops. This can be highly frustrating, as you can’t play any audio files on your Lenovo PC.

The reasons that can cause this sort of issue can vary, ranging from problems with your physical sound card to missing drivers installed on your PC.

However, there’s a way to fix these problems for your laptop, and today we’ll show you how to fix sound on Lenovo laptops.

This article will also help you if the Lenovo speakers are not working or the Lenovo audio is not working on your laptop.

Why is my Lenovo laptop sound not working?

If your Lenovo laptop is muted, there are a few things that you may consider. The most common triggers are:

The volume level – There are chances you have the volume set to zero; in this case, there will be no sound naturally.

Ruined internal speakers – While settings are often the culprit, you should double-check that your speakers are not broken.

Sound on the wrong device – This is funny, but your OS may send the sound to the wrong device. If that is the case, you will have no audio on the Lenovo computer.

Audio enhancement – If you have any audio enhancement, there are chances that they are disrupting the sound, and you may need to do away with them or reconfigure them.

Problems with drivers – If you are using corrupted or outdated drivers, at a point, they will stop receiving sound, and you will have to update or reinstall them.

Moreover, here are some error variations that you may meet and fix with the solutions below:

Lenovo speakers not working – Lenovo laptop speakers not working Windows 11

Lenovo laptop speakers not working but headphones are

No sound Windows 11 Realtek – Lenovo Realtek audio driver not working

Lenovo no audio output device is installed

Lenovo no sound after Windows update

Lenovo ThinkPad speaker / Synaptics audio not working

Lenovo Legion or IdeaPad 3 sound not working Windows 11

Lenovo laptop sound not working Windows 10

The audio service is not running Lenovo Windows 10

While these are not the only causes, they are an excellent place to start troubleshooting. And we will be introducing you to the best solutions.

How to fix Lenovo laptop with no sound on Windows 11? 1. Uninstall the sound driver from Device Manager

You need to know that the system will install a default driver, not the exact one for your device. If this doesn’t solve the problem, follow the next solution.

If there’s no sound on Lenovo desktop, updating the drivers might do the trick, if the problem lies with corrupt or outdated audio drivers.

Windows 10’s driver updater isn’t all that reliable, and sometimes a scan might not yield any results.

However, third-party driver updaters don’t have this issue, which is the case with the recommended solution below.

Here’s how to do it:

Download and install the Outbyte Driver Updater app.

Launch the software.

Wait for the app to detect all incompatible drivers.

Afterward, it will show you a list of the drivers found to select the ones to Update or Ignore.

Restart your PC to ensure the applied changes.

Outbyte Driver Updater

Use this software and solve all driver-related issues from your PC.

Free trial Download now

Disclaimer: You may need to upgrade the app from the free version to perform specific actions.

2.3 Lenovo audio drivers not working

Suppose you own a Lenovo laptop in the unlikely event that the driver updating was unsuccessful. In that case, you will need to visit the manufacturer’s website and download the correct drivers, as shown in the steps above.

3. Check if your sound settings are correct

Fixing the sound settings might restore the sound to normal. If Windows 11 Sound settings are not opening, restart the computer and then try again.

Expert tip:

4. Change the properties of your audio device

Another simple and time-saving method to resolve Lenovo sound issues on Windows 11 is to modify the properties of the audio device like in the example below.

Changing the sample rate worked for some users, so if they managed to fix the sound problem, make sure you try it also.

5. Restart Audio Services How do I enable internal speakers on my Lenovo? Lenovo laptop speakers not working, but headphones are

If the speakers are not working in Windows 10, ensuring the sound goes to the correct device is essential. And it can also help in this situation.

If your laptop speakers are correctly set as the default audio device, you can also try to connect external speakers to the audio connectors (go for the Stereo headphone jack).

Finally, even though it may sound trivial, check your keyboard to verify that the sound is not muted.

Many users reported that the Volume key does not correctly communicate with the system tray and can be turned off without any visual indications.

This article explored the best troubleshooting methods available to fix sound issues on Lenovo laptops.

In most cases, the trigger is a bad driver, and following the solutions we covered should be well on your way.

All the solutions we have discussed have been for Windows 11, but the good news is that if you followed the guide, the exact solutions would work on Windows 10.

So, if you have sound issues on a Lenovo laptop running the latest Windows OS, pick any of the solutions that seem most appropriate to your case from the ones mentioned above.

Was this page helpful?


Start a conversation

Tv Sound Not Working? Here’s 10 Proven Ways To Fix It

If your TV sound is not working as expected, it is likely that the built-in TV speaker is damaged. Sometimes, you may get crackling or popping sounds on your TV or no sound at all.

The TV sound normally stops working due to misconfigured audio mode or faulty connection cables. In the worst case, the problem with the audio hardware on your TV may also result in this issue.

Here, We have compiled a list of 10 fixes you can apply when facing a sound problem on your TV. Let’s dive straight into them.

The first thing you must check when you don’t have sound on your TV is to change the TV channel. The TV channel may be broadcasting only the picture, and you may get confused, thinking of it as a problem with your TV sound.

Check if the sound problem exists in other channels as well. It is an issue with your TV if you don’t get sound on any channels. Else, you are good to go. Sometimes, there may be faults from the cable operator side also. Contact your cable operator and ask them to see over the problem.

After you verify that the issue is not from the TV channel side, you can restart your TV. Sometimes restarting your TV fixes the issue without much hassle. Give it a try before you move to further fix.

The next thing you must do is check the volume levels. The volume on your TV may be too low or muted, and you may be experiencing the issue. Sometimes, the volume low button on your TV panel may be stuck and automatically set the volume to a low level. If that’s the case, you can not increase the volume levels from your TV remote. So, inspect the volume control buttons as well.

Also, check the volume levels on your media devices like set-top boxes or DVD players. If you have low volume levels on those devices, even setting a high volume on your TV will not work.

A misconfigured sound setting is another reason why your TV sound stops working. For instance, you may be using an HDMI cable to connect your soundbar to the TV but set the audio output mode to Analog or something like that. If the output mode is incompatible with your device, your TV won’t output a sound.

Some TV manufacturers like Samsung provide a sound testing feature as a part of troubleshooting tools. It will help you find if there is any kind of audio problem with your TV.

Here’s how to run a sound test on your Samsung TV:

Take your TV remote and tap Home button or Menu button.

Please be aware that this test is done to check the built-in speakers. A test sound is played while running the test. If you hear a sound playing with no issues, there is no problem with your TV speakers. You need to check external speakers for faults.

If you are using external media devices like speakers or a soundbar to boost the TV sound, the cables used to connect them to your TV may be faulty. Inspect the cables for any sort of wear and tear. Re-connect the jacks to the TV port. Loose connections may sometimes create issues. If you see any damage on the cables, consider replacing them if it is a replaceable type of cable.

Also, try removing those external speakers and try to play something with the built-in speakers. If the built-in speakers are doing well, there is probably an issue with your external speaker. You can take your sound system to another device or TV and check if it works.

Depending on your external speakers, you may connect them through either an HDMI, optical, or an RCA cable. Each of them has a separate port to connect it with your TV. The ports can collect debris and dust over time, not allowing the jacks to be properly connected. Please remove the respective cable and inspect if any dust is collected over there. You can use an earbud to clean the ports.

Many users reported that they fixed this issue once they installed the latest updates on their TV. If you have outdated software on your TV, the sound device you are using with your TV may not be compatible with that of the software version on your TV, and you may be encountering the issue. If this is the case, you should get your TV sound back after installing the latest version of TV software.

Steps to update your TV software differs depending upon the TV manufacturers. However, they are almost similar. Make sure you have an active internet connection before starting the update.

Follow these steps to install latest updates on your TV:

On your TV, open Settings.

Navigate to the Support menu from Settings.

Let your TV do the rest. Your TV will restart after completing the update.

This is the last fix you can apply if nothing else worked for you. If you messed up with audio settings on your TV and have no idea how to revert the changes, you can factory reset your TV. Factory resetting your TV will wipe out every change you made to your TV and initialize the settings as if they just came out of your TV manufacturer. You can consult our guide on how to factory reset your TV.

If you tried everything discussed in this post but are still facing the issue with your TV sound, you should seek professional assistance. There might be cases when internal audio hardware is damaged. Or, the cable connection inside your TV has become loose.

If that is the case, nothing will work except getting a replacement for that particular hardware. If something big has been damaged, you can claim the warranty if you are on the warranty period.

Spacebar Is Not Working In Windows 11: How To Fix It

Spacebar Is Not Working in Windows 11: How to Fix It Update the keyboard driver or turn off the Sticky keys feature




If one or other buttons don’t work on a keyboard, then this could be very frustrating.

You can easily fix it by running the keyboard troubleshooter.

Else, you can try rolling back the keyboard driver as there could be a glitch in the currently installed version.



Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

The normal functioning of all of your PC components makes for a great user experience. In case some of the connected components, such as the keyboard do not work, then it could be pretty frustrating, especially, when the issue pops up out of nowhere.

Some users have reported that the spacebar is not working in Windows 11. For some, the issue triggers after the Windows 11 update. In this guide, we will give you a bunch of solutions that will help you resolve the spacebar not working in Windows 11 problem. Let us get right into it.

Why is the spacebar not working in Windows 11?

We did some digging and found a bunch of solutions that trigger the spacebar not working in the Windows 11 problem.

The issue is related to Windows update: Some users have reported that the problem started right after they installed the latest Windows update.

Sticky key feature is enabled: The sticky key feature is useful if you are a shortcut person. However, the spacebar won’t work if that is enabled.

There are some issues with the Keyboard driver: A problem with the keyboard software could be the reason the spacebar is not working in Windows 11.

You haven’t updated the driver: You need to make sure that you have the latest keyboard driver installed on your PC in order for the smooth functioning of the associated hardware.

There is some issue with the system files: If the system files are corrupt or missing then this could trigger multiple issues with your PC.

What can I do if the spacebar is not working in Windows 11?

Close all the programs and restart your PC and see if this fixes the issue or not.

Close all the background apps because there could be some programs that are blocking the spacebar.

Make sure that the keyboard connection, wired or wireless is perfectly fine.

You might have to replace the keyboard as the problem could be the hardware. For that, we have a guide as well, that lists some of the best keyboards that you can buy.

1. Disable Sticky Key

Sticky keys is an amazing feature, but several users have reported that the spacebar not working in Windows 11 problem was easily fixed by turning off the feature. You can also try disabling the feature and see if this resolves the problem or not.

If you are not able to turn off the Sticky keys on your PC, then you can refer to our guide and fix the problem. But before that, you should check how to turn off Sticky keys and see if the normal ways help you fix the problem or not.

Press the Win + I keys to open the Windows Settings menu.

Select Windows Update from the left pane.

Under Related settings, select Uninstall updates.

Hit the Uninstall button for the recently installed update.

Restart your PC.

Often the latest update may include some bugs along with several new features. As important as it is to keep your PC up to date, it is sometimes better to uninstall the update as it could very well be the reason for the problem that you are facing.

3. Run the Keyboard troubleshooter

Expert tip:

4. Download the latest driver

You can follow the above steps to update the driver of your keyboard and see if this resolves the issue or not.

However, there is another way that makes use of a third-party tool called Outbyte Driver Updater. This will help you update all the drivers at once.

Apart from updating the drivers, you can use it as a download manager, schedule scans to keep all of your drivers up to date, create driver backups, and much more.

You need to keep your drivers updated at all times and Outbyte Driver Updater will make your PC faster as well!

Free trial Visit website

5. Rollback drivers

Sometimes that new version of the program can bring in bugs that could cause multiple issues. In such a case, we would suggest you roll back the drivers and see if this helps.

That is it from us in this guide. We have a guide that will help you fix the Caps lock stuck on or Num lock issue.

Some users have reported that their keyboard is not typing the double letters. This can be easily fixed by following our dedicated guide. If the keyboard is not working at all on your Windows 11 PC, then you should check out our guide which will help you fix the issue.

Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

Fix: Dell Laptop Headphone Jack Not Working

If your Dell laptop’s headphone jack isn’t working all of a sudden, then this article can be of great help.

This issue frustrates users who regularly use headphones. Here I have shown what you need to do when the Dell laptop headphone jack is not working.

Without delaying any further, let’s dive deep into the fixes.

There can be many reasons why your laptop’s headphone jack is not working.

I have listed below the potential causes:

Problematic Audio Drivers

Improper Sound Configuration

Hardware Glitches

Dell laptop users have reported that when the headphones are plugged in, the headphone jack doesn’t work.

The Sound comes out from the speakers even when it is plugged in.

Here, I have mentioned some solutions for resolving the Dell audio headphone jack not working issue.

Few users have observed that restarting the device has helped in resolving this kind of issue.

So, restart your laptop and then plug in your headphones and check whether it is working properly.

If the issue still persists, then plug in the headphones before rebooting.

Few users have discovered that if the headphones are already plugged in before rebooting the Windows device, then this issue won’t occur.

Try doing it and check whether it solves the problem

An outdated audio driver can be responsible for this issue.

If this is the case, you need to update the laptop’s audio driver and check whether the issue is resolved.

This is how it can be done:

First, type “Device Manager” in the Windows Search button and choose the top option.

Now, expand the Sound, video, and game controllers section.

Wait till the process is complete. Now, restart the PC and check whether the issue is resolved. If not, then run the Sound Troubleshoot.

Windows has a lot of troubleshooters that can help in fixing most of the issues.

Here is how you can do it:

By pressing the “Next” button, you can run the sound troubleshooter.

If this method didn’t work out, then check if the headphones are plugged in correctly.

Make sure you have plugged in the headphones properly on your laptop.

If not, then you will not be able to hear the Sound when you are using the headphone.

If you have plugged the headphones properly, but still, you can’t hear any sound, then use proper headphones.

Make sure the headphone that you are using isn’t broken.

It is, therefore, necessary to a headphone that is in proper working condition.

It may happen that your headphone jack is fine, but the main problem lies with the headphone that you are using.

Also, check whether your phone is connected to a different device.

If your smartphone is paired with wireless headphones, speakers, or anything else, then the headphone jack may get disabled.

If you find that the Bluetooth option on your phone is on and is connected, then turn off the Bluetooth and plug in your headphones.

Even though this doesn’t happen, always check for this issue before going to the next solution.

If you are still now pissed off with the same issue, then it’s time to clean the headphone jack.

 Making the headphone free from dust, lint, and other debris will be helpful in fixing your issue.

Dirt generally blocks the connection between the headphone and the port, so cleaning it is one of the primary things that can be done.

Take a look at the jack and see whether it is dirty.

Use a damp cotton swab and clean it before plugging your headphones.

Before you plug in the headphones, restart the device.

If none of the above fixes worked then you can contact the manufacturer or the retailer and explain the problem to them.

If the product is under warranty, then the company will send a technician and repair it free of cost.

This might take a lot of time but it can be the last and best possible thing that can be done to fix the issue.

If the issue persists, you can always use a bluetooth headphone instead.

1. How Do I Turn On The Headphone Jack On My Dell Laptop?

If you want to turn on the headphone jack on your Dell laptop, then follow the steps mentioned below:

Now, under choose your Output device, select the audio device that you want to use.

2. How Can You Fix A Water-Damaged Headphone Jack?

For fixing a water-damaged headphone jack, you should use a cotton swab.

Insert some cotton from the end into the slot and turn it gently to absorb the residual water.

Doing this will help you in resolving the issue.

3. How Can I Use The Microphone Jack As A Headphone Jack On My Laptop?

This is how you can use the microphone jack as a headphone jack on my laptop:

First, you need to plug your earphones into the jack.

You will soon see the Sound Control Panel opening up.

Update the detailed information about Is Your Laptop Fan Not Working? Here’s How To Fix It on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!