Trending February 2024 # How To Remove Malware From An Android Phone # Suggested March 2024 # Top 9 Popular

You are reading the article How To Remove Malware From An Android Phone updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Remove Malware From An Android Phone

One of Android’s greatest strengths is the open nature of the platform. Unlike iOS devices, you’re free to install any software you want. Unfortunately, that’s also a source of problems. 

Opening Android up to software outside of the official app store introduces the possibility of malware. If your Android phone has been afflicted by malware, you’ll want to remove it as soon as possible. In this article, you’ll learn how.

Table of Contents

Do I Have Malware?

We assume that since you’re reading this article, you suspect that your Android phone has a malware infection. However, malware is rarer than you might think. There are a few typical malware symptoms you’ll want to be aware of:

If that sounds like you, let’s move on to how you can deal with your malware issue.

Switch Off the Phone!

If you’re highly confident that your phone is infected with malware, switch it off completely. This should prevent the malware from “phoning home” and perhaps further infecting and taking control of your device. Remove the SIM card while you’re at it. 

When you’re ready to turn the phone on again, put it in Airplane Mode or switch off your WiFi router to prevent the device from connecting to the internet. Hopefully, you’ve cut off communications from the phone before any of your private data has been sent back to the malware authors. 

Use an Antivirus App

Using antivirus software is the most obvious thing to do when dealing with malware on an Android device, but some readers may not know that antivirus apps exist. Of course, it would be better to install an antivirus app before your phone is infected. 

That’s because some malware might interfere with the installation of antivirus applications. We’ll cover a few things you can do if it’s too late for an antivirus app. If installing an antivirus app is still viable for you, check out The Five Best Android Antivirus and Security Apps for verified and effective options.

Put Your Phone Into Safe Mode

Just like most desktop computers, Android offers a “Safe Mode.” In this mode, the phone doesn’t allow any third-party applications to run. It’s a good way to test whether it is in fact an app that’s causing your issues. If your phone’s problems disappear in Safe Mode, it’s likely malware.

To enter Safe Mode on Android 6 device and newer:

Press the power button.

From the options, tap and hold Power Off.

    When you see Reboot to Safe Mode, select it and confirm.

    Now, wait for your phone to restart. In Safe Mode, you can still remove apps, so this is a good opportunity to uninstall the apps you’re most suspicious of. If you’re lucky, that might remove the malware.

    If you’re not that lucky, you’ll at least have stopped some of its functionality, allowing you to install a trusted antivirus app if necessary.

    In Safe Mode, Remove App Admin Privileges

    Safe Mode temporarily puts a stop to whatever third-party apps are doing on your phone. As mentioned above, you can use this as a chance to delete suspicious apps. However, you should also take the opportunity to review which applications are listed as “Device Administrators.” Apps with this level of privilege can do extreme things, such as erasing the entire phone.

    Some applications need administrator privileges to do their job, but such apps have explicit justifications listed in the Device Administrators list.

    On our Samsung S21 Ultra unit, the menu is called “Device admin apps” and is listed under “Other security settings” within the Biometrics and security menu. Few apps should have this privilege toggled on, and you should disable this permission for any applications you don’t know for sure should have complete control of your phone.

    Factory Reset Your Phone

    Yes, completely wiping and resetting your phone to its out-of-the-box state may feel a little drastic. However, it could be the fastest way to remove malware from an Android phone. 

    It should be no more than a mild inconvenience for most people since all your information is in the cloud. So, once you’ve signed in with your Google account after the reset, your data should be restored automatically. Before you reset, read Google’s backup and restore document, so you’re sure how it works.

    Serious Infections Such As Rootkits

    Certain types of malware prove harder to remove from your Android phone than your typical bug. Some of them are so tough that they’ll survive a factory reset! Rootkits are a prime example of such a hard-to-kill malicious program.

    A rootkit is a type of malware that installs itself into the core parts of the operating system. Normally, those critical parts of the software running your phone would be completely off-limits, but hackers find exploits in systems all the time and use those to enable the installation of rootkits.

    Rootkit Security Warning on Red Binary Technology Background

    Rootkits are almost impossible to detect, but poorly-written ones can still produce classic malware symptoms. They are the most dangerous form of malware because they offer complete control of your phone to a stranger. They can spy on you and do with your phone data what they like.

    Antivirus makers aren’t sitting on their hands. Apps like Avast Antivirus also come with a built-in rootkit scanner. Of course, it’s not clear how effective they are because we can’t know about the rootkits these scanners miss, but it’s better than nothing!

    An Ounce of Prevention

    Hopefully, if you were infected with malware, the above tips have helped cleanse your phone of evil. If it turns out you weren’t infected, that’s even better news!

    Now we need to talk about not getting infected or victimized by malware in the first place:

    Finding out you’ve got malware on your phone can feel like quite a violation, but with the right safeguards, you’ll almost certainly avoid becoming a victim in the first place.

    You're reading How To Remove Malware From An Android Phone

    How To Pair Your Google Stadia Controller To An Android Phone Wirelessly

    Until now, if you wanted to use your Stadia controller to play games on your Android phone, your only option was to connect both of those devices using a USB cable. That changes now after Google announced that you can now play games on your Android device using the Stadia controller, wirelessly!

    Yes, after six months of launch, your Stadia controller can finally be used to play games on your phone wirelessly. The following post will help you figure out how you can pair a Stadia controller to your Android device and use it to play games.

    What do you need

    A Stadia-compatible Android phone (compatible devices are listed below)

    A wireless network that your phone and controller are connected to

    The latest version of Stadia app installed

    Can I use my Android phone to connect to a Stadia controller?

    For now, the Stadia controller will only work with the following mobile devices. You can only pair your Stadia Controller to your Android device if it’s present in this list.

    Google – Pixel 2, 2XL, 3, 3XL, 3a, 3a XL, 4, 4XL

    Samsung – Galaxy S8, S8+, S8 Active, Note 8, S9, S9+, Note 9, S10, S10+, Note 10, Note 10+, S20, S20+, S20 Ultra

    OnePlus– OnePlus 5, 5T, 6, 6T, 7, 7T, 7 Pro, 7T Pro, 7 Pro 5G, 7T Pro 5G, 8, 8 Pro

    Asus – ROG Phone, ROG Phone II

    Razer– Razer Phone, Razer Phone II

    How to wirelessly pair your Stadia controller to an Android phone

    Step 1: Download and install or update to the latest version of the Stadia app on Google Play.

    Step 2: Connect your Stadia-compatible Android device to a WiFi network that you are going to connect your controller to as well.

    Step 3: Connect your Stadia controller to the same wireless network as that of your phone. To connect your Stadia Controller to Wi-Fi, turn it on, press and hold the Stadia button until it vibrates, and then open the Stadia app. Now open the Stadia app on your phone, tap the Controller icon, select controller from the list, then tap ‘Yes’ and ‘Continue’.

    In the next screen, select the WiFi network you connected your Android device to, enter the password, tap ‘Connect to Wi-Fi’ and then hit ‘Done’. Your Stadia controller has been connected to the same WiFi network as your Android phone.

    Step 4: Open the Stadia app on your phone and select a game you want to play from the ‘Your games’ section.

    Step 5: In the drop-down menu that pops up, select the ‘This screen’ option, and tap on the ‘Play’ button.

    When the game is being launched, you will be prompted to add a controller.

    Step 6: Now press and hold the Stadia button on the Stadia controller and wait for it to vibrate twice. You will now enter the linking mode and the status light on your controller will blink white.

    Step 7: Now enter the linking code (generally 4-5 characters long) that’s displayed on your Android phone’s screen. You can input the linking code using these controller buttons – Up, Down, Left, Right, A, B, X, Y.

    The pairing process might take up to 15 seconds as it might take Stadia a moment to recognize the linking code after you have entered it. When your Stadia controller successfully links with your Android device, you will be able to feel two short vibrations on your controller. The status light on your Stadia controller will also turn to a solid white color.

    Facing issues when connecting? This should help

    The status light is still blinking white: You haven’t entered the full linking code yet. Enter the code and wait a few seconds to let your controller connect to your phone.

    The status light blinks orange: This might happen if you entered an invalid linking code. Wait for the status light to start blinking white to enter the linking code again.

    Make sure your controller and phone are connected to the same network: Wireless linking on your Stadia controller is only possible if both the Stadia Controller and your Android device are connected to the same Wi-Fi network.

    Are you using a compatible wireless network: Your Stadia Controller might fail to connect to your Android phone if you’re are connected to the same Wi-Fi network like in a cafe, hotel, or an office.

    Were you able to connect your Stadia controller to an Android device?

    How To Unlock And Access An Android Phone With A Broken Screen

    How To Unlock And Access An Android Phone With a Broken Screen

    Not knowing data recovery is possible even when you have a broken screen, many people trade their phone. Those who do so here are certain tips and tricks using which you can access your Android phone even when your Android phone is shattered beyond repair.

    Remove Broken Glass Pieces

    Do You Have a Broken Screen Insurance?

    Earlier there was no insurance for broken or damaged devices however nowadays, devices come with unconditional insurance policy. So, dig out your insurance papers and see if you are that lucky. If not, you can try the following tips to access Android phones.

    How to Access Android Phone with Broken Screen (With Display) Method 1: Connect an OTG Adapter

    The easiest thing you can do is to use an OTG (On The Go) Adapter and a mouse to establish a connection between your cellphone and mouse. OTG is a small handheld device that can be attached to your phone to connect a mouse. Once you restart the phone, it should recognize the adapter and the mouse. Now you can use the mouse pointer to unlock the device by drawing a pattern.

    “Please Note: If your phone is locked via a text then this method will not work for you.”

    Method 2: Use Screen Removal Software to Unlock Android Phone

    If the above method doesn’t work for or you find it complicated then its time to use a third-party app. You can find various apps in the market but we recommend using Android Lock Screen Removal.

    This is the best app as it helps remove the password from your Android device without touching it. You can bypass any type of screen lock like PIN, Pattern, text and unlock your Android device. The main benefit of the app is it will not delete anything from your phone.

    Android Lock Screen Removal is the safest way to unlock and access the Android phone without losing data.

    Download this amazing tool now:

    Download It for iPhone

    Download It for Android

    To use the app follow the steps below:

    Download and install the tool on your Mac or Windows machine.

    The tool from imyfone will now download the necessary packages. You will be asked to disconnect the phone do so else things will not work.

    Once the download process is completed the program will remove the password. You can now copy all the files from the phone and save them on your PC.

    Reboot your Android device in Download mode by pressing Power, Home, and Volume down buttons.

    See it was this simple you were panicking without any reason.

    Method 3: Check your Google Contacts

    I hope using these methods you are able to unlock your Android device and access data.

    Bonus Tips

    Keep phone backup service active on your device to handle such unforeseen situations.

    Always keep remote control turned ON of your device to access it from any system, anytime, anywhere.

    Sync your phone with Google Drive or Microsoft OneDrive to keep multiple backups all the time.

    Summing Up

    We have collated smart ways for Android broken screen data recovery and few of the best tips and tricks to access Android phone from pc. Following these steps, you can remotely control Android phone from PC and unlock & access an Android Phone with a broken screen anytime anywhere.

    Quick Reaction:

    About the author

    Raj Soni

    How To Remove Search Marquis From Mac (2023)

    Measure to be taken to block Search Marquis from entering Mac:

    Always install apps from known or credible websites sites and applications.  

    Only install extensions from the Chrome web store or trusted sources.

    Search Marquis is a virus that affects the browser on your Mac.

    It was a normal day when you opened your browser on Mac to surf the internet but noticed something unusual. Your browser is redirecting you to other search engines or web pages. Since you are pretty sure you haven’t made any changes or someone else, then the culprit will be the Search Marquis virus, also known as Search Baron!

    So, what is the Search Marquis search engine virus, and how can you eliminate this browser search hijacker from your Mac? No worries, as I will provide information about this search Baron malware and guide you on removing Search Marquis from your Mac.

    What is Search Marquis?

    Its name might mislead you into believing it is a legitimate search engine, but Search Marquis is malicious software that aims to redirect users to unwanted websites and then extort money from them. In short, this Mac search engine virus torments users for the benefit of its creators.

    Although Macs are generally less susceptible to malware and viruses, it is always good to know the most common Mac viruses and how to remove them. Search Marquis disguises itself as a useful browser extension to get access to your Mac and then changes the default search engine on Safari or other popular web browsers on Macs.

    Apart from changing search engines, Search Marquis can also change the default start page browser preferences and settings or, even worse, send your user data to those unknown virus creators.

    How do I know if my browser is affected by Search Marquis?

    The first instance to know if the Search Baron virus has hijacked your browser is with the sudden change of Search Engine or start page on a browser.

    If you try to change the browser settings back to how they used to be, it will soon revert to the way the virus wants it to be, making you realize that no matter what you do, it’s impossible to change browser settings. That’s your cue to eliminate Search Marquis on Safari or any other browsers on your Mac.

    Users are mostly redirected to chúng tôi when the Search Marquis virus affects their Mac. But before reaching Bing, the virus will first lead users through some sketchy sites, mainly:

    Reasons why Mac gets affected by Search Marquis

    Search Marquis primarily enters your Mac through a software packaging scheme called bundling. It comes with extensions or software that you may download from malicious or unknown sites. Ad affiliate networks bury the details about the bundled software in the accompanying terms and conditions. In turn, users unknowingly consent to the download and allow the affiliate networks to operate legally.

    The best way to prevent this is by visiting trusted websites and paying attention to terms and conditions before installing anything on your device.

    How to get rid of Search Marquis virus from Safari on Mac

    The next step in removing Search Marquis on Mac’s Safari is to uninstall all those suspicious and unused extensions.

    To ensure the virus doesn’t attack Safari again, follow the steps below.

    Fix website redirection settings

    Apart from changing the default search engine on Safari, you also need to change the default homepage from what was set by the Search Marquis virus.

    Launch Safari on Mac.

    Select the General tab.

    In some cases, a bug may grey out the homepage field. When that happens:

    Open Safari → Preferences → General.

    If doing all the above didn’t help, try this:

    Quit Safari.

    Open Finder → Go → Go to Folder.

    Enter this in the Go Folder search field and hit return: ~/Library/Preferences/

    Reset Safari on Mac

    Now, while this is optional, it is still a good option to completely clean all the data of Safari and have a fresh start. Here’s what you need to do:

    Open Safari.

    Choose History from the menu bar.

    From the drop-down menu to Clear, select All history.

    Your browsing data will be cleared instantly. Once done, Force Quit the app and reopen it to see if Safari browser is redirecting to Bing or any other search engine apart from the one you have set.

    How to remove Search Marquis virus from Chrome on Mac

    Apart from that, many users also use Chrome as their default browser, and here are the things you need to do to stop Search Marquis from Mac on Chrome.

    Remove suspicious extensions

    Open Chrome.

    Fix website redirection settings

    Open Chrome.

    Choose Chrome from the menu bar → select Settings.

    Next, select Search engine.

    If you are unable to find one of your choices:

    Go to Chrome on the menu bar → Settings.

    Select Search engine.

    Hit Manage search engines and site search.

    Select Add next to Site Search.

    Add the search engine URL, shortcut, and name on the respective fields.

    Now find the search engine under Site Search.

    Hit the three dots next to it → select Default.

    Reset Chrome on Mac

    Open Chrome.

    Select History from the menu bar.

    Select Clear browsing data.

    Select the time range (here, we are selecting All time).

    Tick Browsing history, Cookies and other site data, and Cached images and files.

    Apart from that, you can completely reset Chrome from:

    Select Chrome from the menu bar → Settings → Choose Reset settings.

    Next, choose Restore settings to their original defaults.

    Choose Reset Settings to confirm changes.

    How to remove Search Marquis from Finder

    Now that we know about Search Marquis or how it gets into your Mac, let us now look at how to get rid of Search Marquis on your Mac. 

    Trash malicious apps

    You need to first find the malicious files and apps on your Mac that Search Marquis may hide. To do this, you need to open Activity Monitor.

    Open Finder. 

    Select Utilities.

    Once opened, look for suspicious or unfamiliar resource-intensive activities in the CPU, Memory, and Battery tabs. Usually, these kinds of apps hide under an unthreatening name, so If you feel something seems questionable, simply search about it.

    Once you find a suspicious app, select the suspicious app.

    Note: You have to be careful when deleting files or processes. Deleting the wrong file may damage your system.

    You can also stop apps from starting on the startup to prevent them from meddling with the browser settings or completely uninstall them.

    Remove unwanted files

    Apart from uninstalling all the suspicious apps, you need to ensure deleting all the files of the respective apps. Not only will this help you block Search Marquis from Safari or any other browsers on your Mac, but it will also help you free up space on your Mac.

    Open Finder.

    Hit Go option from the menu bar → select Go to Folder.

    Next, copy-paste these commands in the search dialog box one at a time → press return:

    ~/Library/Application Support: The Application Support folder is the place where apps store the files to operate. Here, check for recently generated suspicious folders, specifically the ones unrelated to Apple apps and products you don’t remember installing. Some commonly known malicious folder names including: IdeaShared, ProgressSite, and UtilityParze.

    /Library/LaunchDaemons: Launch Daemons is an internal service for running macOS. Sometimes, the Mac search virus files can be found in this directory, and hence you need to also check out files here. Some examples: com.ExpertModuleSearchDaemon.plist, com.applauncher.plist, and com.startup.plist.

    com.Search Marquis

    com.Search Marquis.plist





    Note: Sometimes, Search Marquis files will stay hidden, so you might have to unhide these files and folders to find and delete those uninvited guests. Remember, it is hard to distinguish what is important and what is not. Hence, before deleting them, do a quick search on the internet and then decide.

    Check and remove suspicious login items

    In business and company settings, IT admins use profiles to control the behavior of their employees’ devices. These profiles may restrict specific actions and configure their Macs to do different things.

    Similarly, browser hijackers and adware may use configuration profiles to prevent users from removing malicious programs from their devices, including changing their browser settings. Some examples of profile configurations include: TechSignalSearch, AdminPrefs, Chrome Settings, and MainSearchPlatform. To remove login items, do the following:

    On macOS Ventura or later:

    Open System Settings.

    Choose General.

    Go to System Preferences → Users & Groups.

    Check for any suspicious apps → hit the minus (-) button.

    Choose Remove.

    Apart from that, you need to check and delete any unknown profiles on your Mac as Search Marquis virus might create a custom profile to restrict specific actions to prevent users from removing Search marquis on Mac and make browser settings.


    Is Search Marquis dangerous? 

    Yes. Besides changing the default browser settings, Search Marquis malware sends your data to unknown sources. Hence the Search Baron virus is harmful to your PC.

    Why does search Marquis appear in Chrome

    The main reason for Search Marquis affecting the Chrome browser is that you might have installed malicious apps or extensions, and this malware has entered your system through bundling. The only solution is to follow the steps mentioned to stop Search Marquis from Mac Chrome.

    Can browser hijackers steal passwords? 

    Unfortunately, yes. If a search engine virus hijacks your Mac or browser, these browser hackers will access all of your data, including passwords and search history.

    Happy browsing!

    With this detailed guide, I have included all the steps to remove Search Marquis from Mac. However, that doesn’t make your Mac immune to it, especially if you continue to download from unknown sites and use suspicious apps.

    Author Profile


    Anoop loves to find solutions for all your doubts on Tech. When he’s not on his quest, you can find him on Twitter talking about what’s in his mind.

    How To Remove Background From Image In Photoshop

    Delete/Remove a Background in Photoshop Easily

    As a designer, we should know some quick and efficient techniques to extract some particular objects or design element from an image. We will learn them in this tutorial.

    How to Remove Background in Photoshop: First Example

    Below is a step by step guide to remove background from image in Photoshop with an example:

    Step 1) Select Image whose background you want to remove

    This is an image of a model with a clean white background, and we want to extract the model and delete background in Photoshop.

    We can extract this with the help of photoshop extraction tool like “pen tool,” but it will be a very time-consuming technique. So we can’t use the pen to remove background from image.

    Step 2) Chose the Magic Wand Tool and select background

    Step 3) Apply Inverse

    Now we want to extract the model so we have to select her, go to select menu and choose “inverse” so it will invert the selection.

    Step 4) Refine Edges

    This is refined edge panel. I’m changing the view mode from “black & white” to “on black.”

    Because of the black background, we can see what the problem with edges of the model is.

    Now start painting on edges of the model and see how it is subtracting some unwanted white color pixels from the selection as shown in the below Photoshop CC remove background example.

    I have removed rough edges and made them softer.

    Let me change the view mode to “black & white.”

    Keep in your mind that black means “transparent” and white means “opaque.”

    Step 5) Use the “erase refinements tool.”

    Here some part of the model has been transparent, so I need to remove it for that select “erase refinements tool” and correct the selection.

    But this is not a big issue so that we can deal with it later.

    Step 6) New Layer

    You can see here some transparent pixels around the edges of the model in some specific portions. So now change the setting of “output” option. Select “new layer with layer mask” from drop-down list.

    Press ok

    You can see here in layer panel a new layer is created with a layer mask.

    Now see these transparent pixels here. To deal with it duplicate the layer by pressing CTRL + J.

    And you can see our problem is solved.

    Step 7) Output

    You can see with the help of this cool trick we have extracted the model very nicely.

    Remove Background in Photoshop: Luminosity Based Extraction Technique

    In this Photoshop CC remove background technique, we will talk about “luminosity based selection.”

    See here is an image of smoke, in smoke, some portion is full opaque while some part is half transparent. So we want to extract the smoke with proper transparent pixels.

    In the previous technique, we have made our selection with “magic wand tool,” but here it will not be the proper technique in the case of smoke.

    So here we will use the “channels palet” to erase background in Photoshop.

    Now go to select menu and choose Inverse.

    Then press CTRL + J to create a new layer of the selected portion.

    You can see here a new layer is created of the selected area.

    But it looks very flat.

    So to maintain it’s density select layer and press CTRL + J for around 4-5 times.

    And merge all duplicate layers.

    Now you can see, with the help of this trick how perfectly we have extracted the smoke.

    This is called “luminosity based selection” technique to delete background in Photoshop.

    Photoshop Extracting Objects With Quick Selection Tool

    Here is a model and we want to extract her hair very quickly using extract tool in Photoshop CC.

    If we use the “pen tool” in this particular image then it will be a time-consuming process, but if we do not need to waste more time on this, we can do this very nicely and quickly with the help of “refine edge” option.

    Grab the “quick selection tool” and select the model roughly.

    Select view mode “on layer.”

    And start painting around edges of the hair.

    You can see how it is refining the selection around the hair.

    Look some unwanted pixels are also removed from the selection.

    I’ll take out this selection as “new layer with layer mask”.

    Look here a new layer is created with a layer mask and the model is extracted very nicely.

    Take a duplicate of layer and so that we can deal with some transparent pixels around edges of the model.

    So these are some cool and quick tricks for extraction in photoshop cc.

    How To Connect Airpods Pro To Android Phone

    Things you need to know:

    Put the AirPods in the case and keep the lid open. Press and hold the setup button until white light flashes → Open Bluetooth settings on your Android phone → tap AirPods → tap Pair.

    You will miss many features of AirPods while using it with an Android phone.

    We all know that AirPods are a great companion for the iPhone. Many features make most Apple enthusiasts stick with it despite having many other options in the market. And if you are from the Android camp, you may wonder what’s so special about AirPods?

    The only way to find out is to connect your AirPods to your Android phone and experience it yourself. But first, let’s see if AirPods can connect to your Android phone.

    Do AirPods work with Android?

    Yes. You can connect AirPods with any Android phone or tablet via the Bluetooth standard. But you must note one thing; many features are limited to iPhone. Let’s look at the available features and the ones you will miss.

    AirPod features that work on Android

    Here are all the features that you can use on your Android phone:

    Listen through one AirPod: Since this is an AirPods exclusive feature, you do get the ability to listen through one AirPod. But you do have to change the sound mode from stereo to mono on your Android phone.

    Features that don’t work on Android

    No matter which Android phone you are using, you won’t be getting the following AirPods feature on your Android device.

    ‘Find my’ function: Another great feature that you won’t be able to enjoy on Android.

    Despite knowing you will miss many features of AirPods, if you still want to connect it to your Android phone, then let’s check the steps.

    How to pair AirPods with an Android phone

    To pair all models of Airpods with Android:

    When the white light flashes, turn on Bluetooth on your Android phone.

    Next, tap AirPods from the list.

    Now, tap Pair.

    Wait for a second or two, and you will see the AirPods connected to your Android phone.

    Note: Don’t shut the lid while in the pairing process. If the pairing fails, press and hold the setup button and then try to pair it with an Android phone. Release the button only after pairing AirPods.

    Video: How to connect AirPods Pro to Android phone


    Q. Why won’t my AirPods connect to my Android? 

    There could be many reasons why AirPods are not getting connected. You can try to put them inside the case and press and hold the setup button until the white light blinks. Keep in mind the lid of the case must be open.

    Q. How do I use AirPods Pro noise Cancelling on Android? 

    Press and hold the stem to activate noise canceling on AirPods Pro while paired with Android,

    That’s it!

    While AirPods won’t change your listening game, it is worth a shot. But I won’t really recommend buying them without testing, so beg or borrow before you invest. And if you’re looking for something better, check our list of best AirPods alternatives where you can enjoy most of the features even on your Android phone.

    Here are some more AirPods tips and tricks for you to read:

    Author Profile


    Anoop loves to find solutions for all your doubts on Tech. When he’s not on his quest, you can find him on Twitter talking about what’s in his mind.

    Update the detailed information about How To Remove Malware From An Android Phone on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!