You are reading the article How To Force Restart An Iphone And Enter Recovery Mode updated in December 2023 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Force Restart An Iphone And Enter Recovery Mode
Often, a simple restart is all it takes to fix the odd issue on your iPhone. But rarely, you will come across serious problems that require you to force restart and enter iPhone recovery mode instead.
For example, you may have an iPhone that gets stuck at startup, engages in a continuous boot loop, or doesn’t respond to touch. A force restart helps you reboot the non-responsive device, but going the extra step and entering recovery mode also gives you a shot at fixing the problem for good.
Table of Contents
iPhone recovery mode gives you two options. You can update your iPhone with the latest version of iOS while keeping your data intact. Or, you can choose to reset it to factory settings. If you have a local or iCloud backup, you can also restore your data in case the device starts to function normally again.
That said, force restarting an iPhone, let alone entering recovery mode, can be a bit confusing since the process is different among the different iPhone models. The same goes for the iPad. You must make some basic preparations beforehand.
How To Prepare for iPhone or iPad Recovery ModeTo force restart an iPhone or iPad and enter recovery mode, you must have a Mac or a PC at hand. It’s best to use one that has a local backup of your iPhone or iPad since you may end up resetting the device. Otherwise, any Mac or PC will do since recovery mode does not require you to “trust” a desktop.
In macOS Catalina and newer, you must use the Finder app to interact with the iPhone or iPad once it’s in recovery mode. On macOS Mojave and earlier, as well as on Windows, you must use iTunes. If you use a PC and it doesn’t have iTunes, install it before you move on.
That said, start by connecting your iPhone or iPad to the Mac or PC via USB. You may have to use a USB-C to USB Adapter on a Mac that only has USB-C ports. Then, open Finder or iTunes. You are now prepped and ready to enter Recovery Mode.
How To Force Restart an iPhone and Enter Recovery ModeDepending on your iPhone model, you have to use one of three different methods to force restart and enter recovery mode.
iPhone 8 Series, iPhone X, and LaterOn the iPhone 8 series and later, which includes all iPhones with Face ID functionality (such as the iPhone X) as well as the Touch ID-based iPhone SE (2023), you must use a combination of three buttons to force restart and enter recovery mode. Press them in the following order:
1. Press and quickly release the Volume Up button.
2. Press and quickly release the Volume Down button.
3. Press and hold the Side (Sleep/Wake) button.
After a few seconds, the screen will go black and the Apple logo should show up. Keep holding until you see the recovery mode screen. You can then release the Side button.
iPhone 7 Series OnlyThe iPhone 7 and the iPhone 7 Plus require a two-button combination to force restart and enter recovery mode. Start by pressing and holding the Volume Down button and the Side button at the same time.
Keep holding both buttons while the screen goes black and the Apple logo shows up. Once you see the recovery mode screen, release both buttons.
iPhone 6s Series and OlderOn the iPhone 6s, iPhone 6s Plus, and older iPhone models, simply hold down both the Home button and the Side/Top button.
The screen should go black, and the Apple logo should follow soon after. Continue holding until you see the recovery mode screen. You can then release both buttons.
How To Force Restart an iPad and Enter Recovery ModeIf you want to force restart an iPad and enter recovery mode, you must follow one of two methods depending on whether your device has a Home button or not.
1. Press and quickly release the Volume Up button.
2. Press and quickly release the Volume Down button.
3. Press and hold the Top (sleep/wake) button.
Keep holding until the iPad force restarts and enters recovery mode. You can then release the Top button.
Keep holding both buttons until the recovery mode screen shows up on the screen. You can then release both buttons.
How To Use Recovery ModeOnce you enter recovery mode on your iPhone or iPad, you will automatically see a pop-up notification in Finder or iTunes that will prompt you to either update or restore the device.
We recommend that you update your iPhone or iPad first. Select Update, and your Mac or PC will attempt to download and install the latest version of iOS or iPadOS without deleting your data.
If your device exits recovery mode and reboots automatically (which happens after 15 minutes), wait for the download to finish, re-enter recovery mode, and select Update again.
If the update fails or doesn’t fix your device, you must restore it to factory settings. That will also delete all locally stored documents, photos, and videos on the device.
However, you can choose to restore lost data with a local or iCloud backup afterward. You can also get back any data that was synced to iCloud (such as your photos if you had iCloud Photos enabled) or third-party cloud storage services.
If you want to go ahead, select Restore, and then select Restore and Update.
If you change your mind and want to exit recovery mode, start by unplugging the device from your Mac or PC. Then, hold down the Side/Top button until the screen goes dark. Hold it down again until you see the Apple logo on the screen.
Recovery Mode Doesn’t Fix EverythingYou're reading How To Force Restart An Iphone And Enter Recovery Mode
How To Boot Into Xolo Q1010 Recovery Mode
What is Recovery?
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Xolo Q1010 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Xolo Q1010 . Others are software based, let’s have a look them below:
1) Boot into Xolo Q1010 Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
Power off your device and wait 4-5 seconds after lights go off.
└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.
[ad1]
2) Boot into Xolo Q1010 Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Xolo Q1010 Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
How To Boot Into Samsung Galaxy Ace Duos Recovery Mode
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Galaxy Ace Duos in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Galaxy Ace Duos. Others are software based, let’s have a look them below:
1) Boot into Galaxy Ace Duos Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
└ This is completely optional. You can choose to keep the device switched On if you wish to
Press and hold ‘Volume Up + Home + Power’ buttons together and release them as soon as you see the Galaxy Ace Duos logo on your phone’s screen.
Your phone will boot into recovery mode. Use Volume buttons to navigate Up and Down between options and use Power button to select an option in recovery.
[ad1]
2) Boot into Galaxy Ace Duos Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Galaxy Ace Duos Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
How To Activate Dark Mode On Your Iphone And Ipad
It’s true that Apple took some time to implement Dark Mode into iOS and iPadOS. However, now that we finally get to use it, we have to say it looks amazing. No matter whether you’re looking for a way to use your devices more comfortably at night or simply want a fresh coat of paint, we’re sure you’ll want to learn how to activate Dark Mode on your iPhone and iPad.
At the moment, there are three ways to turn on Dark Mode, giving you plenty of flexibility in how to enable and use Dark Mode.
1. Enable Dark Mode via the Settings AppIt doesn’t come as a surprise to know that you can activate Dark Mode through the Settings app on your iPhone or iPad. Here’s what you need to do.
1. Using your iPhone or iPad, navigate to the Settings app. Scroll down a bit and tap on “Display & Brightness.”
2. At the very top of that screen, you can see two configurations for “Light” and “Dark.” As you can already guess, this is how you can enable Dark Mode on demand. However, this option doesn’t instruct your iPhone or iPad to switch to Dark Mode automatically.
3. Take a look just below the two available configurations, and you’ll see a toggle for “Automatic.” Tap on that toggle, and an additional option will appear below. By default, your iOS or iPadOS device will switch to Dark Mode at 10:00 PM (and then revert to Light Mode at 7:00 AM). However, you can tap on “Custom Schedule” and configure when these two configurations should activate.
2. Turn on Dark Mode via Control CenterWe’ll show you another method to activate Dark Mode, which takes only a second of your time. This method relies on your iPhone’s or iPad’s Control Center.
1. Swipe from the top-right corner of your iPhone’s or iPad’s screen. As you swipe your finger down, you will see a grid of differently-sized icons. This is what’s called “Control Center.” If you have an older device with a Home button, swipe up from the bottom to reach the Control Center.
2. You should see a slider that controls the brightness of your device’s screen. Instead of dragging it up or down, hold your finder on this slider. Several new options will appear at the bottom of the screen.
3. Activate Dark Mode via SiriAnd finally, we’d like to share another way to activate Dark Mode on demand. Using Siri is perhaps the fastest way to change the appearance of your iPhone’s or iPad’s software.
All you have to do is say “Hey Siri, turn on Dark Mode,” or “Hey Siri, turn on Dark Appearance.” In some cases, even saying “Hey Siri, Dark Mode” gets the job done. And once you’re ready to get rid of the dark colors on your screen, say “Hey Siri, turn on Light Mode” or “Hey Siri, turn off Dark Mode.”
Wrapping UpWithout any doubt, you’re going to love using Dark Mode on your iPhone or iPad. Once you adjust to the new appearance, we’re sure you’ll want to explore this user interface style even further. With that said, here’s how to enable Dark Mode on YouTube, Facebook, and on your Mac as well.
Isaac Norman
Isaac is a freelance writer with over a decade of experience covering the latest technological innovations. Mainly focused on Apple-related software and hardware systems, his aspiration is to explore all the ways today’s digital world intertwines with our everyday life.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
How To Boot Into Micromax Canvas Doodle 2 A240 Recovery Mode
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Micromax Canvas Doodle 2 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Micromax Canvas Doodle 2. Others are software based, let’s have a look them below:
1) Boot into Micromax Canvas Doodle 2 Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
Power off your device and wait 4-5 seconds after lights go off.
└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.
[ad1]
2) Boot into Micromax Canvas Doodle 2 Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Micromax Canvas Doodle 2 Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
Set Windows 11/10 To Restart Immediately To Install An Important Updates
One of the best features in Windows 11/10 is that Microsoft is not forcing feature updates unless their service terms have expired. It also means that some of the updates, including important ones, can get unnoticed. Apart from this, updates need to honor Active Hour settings. In this post, we are sharing a trick which will make Windows 11/10 restart immediately when required to install an important update. This is especially useful in the case of Security Updates.
Set Windows 11 to restart immediately to install important UpdatesWindows 11 settings are significantly different from those of Windows 10, especially when it comes to options associated with Windows updates. Rather, Windows Updates have been given a separate menu since Microsoft understood that it is fairly well used.
In the Settings menu, go to the Windows Update tab on the list on the left-hand side.
In the right-pane, select Advanced options.
Now, turn ON the switch associated with Get me up to date.
The feature is off by default for all installations.
Restart the device as soon as possible when a restart is required to install an updateHere is how to turn it on in Windows 10:
Toggle on the option which says – Restart the computer as soon as possible to install the update.
That’s it. The next time a critical update becomes available, Windows will immediately install the update, and if required, restart the computer after giving you a warning.
The full details go as:
Restart the device as soon as possible when a restart is required to install an update. Windows will display a notice before the restart, and the device must be plugged in.
Windows will give you enough time to save your work. Usually, a notice about it will show up in the Action Center or a pop-up about the scheduled restart. In case you have an urgent job, you need to complete, you can abort the shutdown with this command.
If you are using a laptop, keep it unplugged, so it doesn’t start automatically. However, make sure to restart and complete the update when your work is complete. Windows 10 v1903 has a new icon for Windows 10 Update notifications. It becomes available in the notification area or system tray alerting you to restart your device.
Why should I turn ON the Restart Immediately After Updates option?Most users would prefer to defer updates even though updates are necessary because they are working. While you can choose to update your system out of active hours, but would you specifically keep your system ON at that point in time? Missing crucial updates could lead to a security threat for your system. Thus, choosing this option could be beneficial.
I see my system forcing me to update Windows 11 even though I never turned on the mentioned option. Why?A lot of updates are crucial to the system. This includes many featured updates. While you can defer them, if done so for too long despite multiple prompts, Windows 11 will force the updates to your system under the same 15 minutes rule.
Update the detailed information about How To Force Restart An Iphone And Enter Recovery Mode on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!