Trending February 2024 # How To Fix Slow Keyboard Response In Windows 11/10 # Suggested March 2024 # Top 5 Popular

You are reading the article How To Fix Slow Keyboard Response In Windows 11/10 updated in February 2024 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Fix Slow Keyboard Response In Windows 11/10

Are you facing trouble using a keyboard because of typing lag or slow keyboard response? Well, keyboard input lag is one of the common problems you encounter while working on a Windows system. Poor keyboard performance is mainly attributed to a lack of memory and system resources. In this article, we explain some quick troubleshooting tips and tricks to solve the keyboard problems in Windows 11/10.

Fix Slow Keyboard Response in Windows 11/10

The following are some of the methods that help you fix slow keyboard problems in Windows 11/10.

Run System Maintenace

Adjust the Character Repeat rate in Keyboard Properties

Turn Off Filter Keys

Run DISM tool in Command Prompt

Create a new user profile

Reinstall Keyboard drivers

Troubleshoot in Clean Boot State.

1. Run System Maintenace

Sometimes cleaning up the unused files and shortcuts will help to fix software glitches. Here is how to do it.

On your Windows system, go to the Start menu.

Now go to Troubleshooting.

Follow the instructions on the prompt to run the system maintenance troubleshooter.

Once done, check if the problem is resolved. If not, continue reading.

2. Adjust the Character Repeat rate in Keyboard Properties

On your Windows Start menu, press Windows key +R to open the Run window.

Now type control keyboard in the text box and press Ok.

In the Keyboard Properties window, go to the Speed tab.

Locate Character repeat and adjust the slider to the max under the option Repeat rate.

Once done, check if your Keyboard is usually working like before. If not, move on to the next tip.

3. Turn Off Filter Keys

On your Windows Start menu, go to Settings.

Navigate to Ease of Access option.

Close the window and check if the problem is resolved.

4. Run DISM tool in Command Prompt

DISM tool repairs a corrupted system image. Running the DISM tool should help to fix slow keyboard problems. Here is how to do it.

On your Windows Start menu, press Windows key + X simultaneously.

On the command prompt, type the following command and hit the Enter key.

DISM.exe /Online /Cleanup-image / Restorehealth

Now close the command prompt window and restart your system.

Once done, check if your Keyboard problem is resolved. If the issue persists, move on to the next tip.

Read: How do I fix Typing delay or lag in Windows?

5. Create a new user profile

If your current user profile is corrupted, you may face issues with the Keyboard. In such a case, try to create a new user profile and check if the problem resolves. Here is how you can do it.

On your Windows Start menu, go to Settings.

Now fill in the form with username and password to create a new user profile.

Now select Administrator and close the window.

Now switch to your new account. Log in with your other user account.

Once done, check if the Keyboard now works correctly. If not move on to the next method.

TIP: Fix Keyboard problems using Keyboard Troubleshooter.

6. Reinstall Keyboard drivers

If the solutions mentioned above didn’t resolve the problem, try reinstalling the keyboard drivers.

On your Windows Start Menu, press Windows Key + X simultaneously.

After uninstalling, restart your system.

Once your system restarts, Windows automatically installs the new keyboard driver.

Now check if the keyboard problem is resolved.

Read: How to reset Keyboard settings to default.

7. Troubleshoot in Clean Boot State

Performing a clean boot helps you manually identify and troubleshoot issues. If you are having trouble using a keyboard, perform a clean boot, and check it works normally. Here is how to do it.

Press Windows +R simultaneously to open Run prompt.

Select the option Load System services and Use original boot configuration.

Now go to Services tab and select the option Hide All Microsoft Services.

Restart your computer

Now try to manually identify and troubleshoot the issue in the clean boot environment.

We hope that this solves the keyboard problems.

You're reading How To Fix Slow Keyboard Response In Windows 11/10

Fix Windows Keyboard Language Changes On Its Own In Windows 11/10

In the case of multiple keyboard scenarios, things get tricky. Keyboard language changes on its own because the keyboard changes while you are typing. The fact is that the keyboard changes because we accidentally hit shortcuts like WinKey+Space key (Changes language/keyboard pairs), or Alt+Shift Change language) or lastly Ctrl+Shift (Changes keyboard).  So, if your Windows 11/10 keyboard language changes on its own, there are three ways to resolve it. The first is to make sure Windows doesn’t add keyboards without your permission, and the second is what we are going to talk about next.

Fix Windows 11 keyboard language changes on its own

The primary solution to resolving the issue Windows 11 keyboard language changes on its own is the same for Windows 11 as for Windows 10, but the procedure is vastly different.

For the solution, you would have to set a different input method for each app window. The procedure to do so in Windows 11 is as follows:

In the Settings window, go to the Time and languages tab on the list on the left-hand side.

Now, under Switching input methods, check the box associated with Let me set a different input method for each app window.

Reboot your system.

How will this option help?

After checking the mentioned option, you would be prompted for the input method individually for each app, unlike earlier when the app could decide. This way, you wouldn’t be bothered with the automatic changing of the input language.

Why were the Language settings changed in Windows 11?

You must have noticed that Advanced keyboard settings fall under a separate setting menu named Typing. Obviously, it seems more appropriate and this is exactly why Windows 11 was created. The purpose was to change the Settings to a more accessible and appropriate structure. Rather, you won’t find most options at the same place with Windows 11.

Windows 10 keyboard language changes on its own Set a different input method for each app window

To disable the change in layout follows the steps below:

Type “Switching input methods”. This will open Advanced keyboard settings with this option inside.

Select the checkbox which says “Let me set a different input method for each app window”.

This will make sure that you choose which keyboard is going to be used for which app. Usually, when you change the keyboard when using an app, Windows remembers that so you don’t have to set it up again.

Apart from this, the Advanced keyboard settings page lets you override the default input method which could be different from the first one in your language list.  Lastly, there is a Langage bar option as well which comes in handy to switch between the keyboard rather quickly. In case you have removed it, you can always restore the language bar back.

Change Language Settings under the Administrative Tab

The last one was reported by a forum user with a solution. He reported that the problem occurred for him when he started typing in some programs with non-Unicode characters. Windows will use the default system local language to interpret these characters even if the language is not available in the language bar.

Make sure that all Display language, Input language, and Format are English (United States) or whatever you want to have. If not go back and make those changes.

Mark two checkbox in Copy your current settings to Welcome screen and system accounts & New user accounts

Last but not least, you may want to disable those shortcut combinations which can accidentally change your keyboard settings.

Having multiple keyboards on your Windows PC is tricky. But then many need to use them on a regular basis, and this change of keyboard is very annoying.

I hope these solutions worked for you!

Read: How to change Keyboard Layout in Windows.

Windows Search Not Working In Windows 11/10; How To Fix?

Quite a few Windows 11/10 users are facing problems, and some of the inbuilt functions are also not functioning as expected for many. The Start Menu and the Taskbar Search functions in the Windows operating system have been some of the most useful features that let us search any file without leaving the desktop. However, there are chances that your Search function might get broken or might not function as intended in Windows 11/10. You may see a message: No Results Found.

Windows 11/10 Search is not working

We will walk you through some of the ways by which you can fix the Start Menu, Cortana & Search problem. Go through this entire post first and then see which one or more of these suggestions may apply for your Windows 11/10 version since Cortana has been separated from the search in recent Windows 11/10 versions.

Restart Computer

Run Windows Start Menu Troubleshooter

Restart Search process

Sign out and Sign in

Run Windows Search Troubleshooter

Reset Windows Search

Check Registry setting

Check the basics

Automatic Repairs

Kill and restart the Cortana process

Disable Antivirus software

Create a new User Account

Re-register the Cortana app

Rebuild the Windows Search Indexer

Uninstall programs that may affect the taskbar

Run CTFMON.exe

Change Keyboard Language

Enable Search Service

Use System Restore

Check your Internet connection.

Windows Search not finding files 1] Restart Computer

Restating a computer can fix a lot of problems, and you should do this as the first step. When the services start afresh, you should be able to use the search without a problem.

2] Run Windows Start Menu Troubleshooter

Microsoft has released Windows Start Menu Troubleshooter, which promises to fix the issue. Please try it first.

3] Restart Search process

Press Ctrl+Alt+Del, and select Task Manager. In the Task Manager window, select the Details tab.

The process will restart automatically after a few seconds.

4] Sign out and Sign in

Sign out and Sign in or restart your PC and see if the problem goes away.

6] Reset Windows Search

Reset Windows Search and see if it helps you.

7] Check Registry setting

If Cortana is not working after you upgraded your PC, open your Registry Editor and ensure that the value of BingSearchEnabled, as well as CortanaEnabled, is set to 1:

HKEY_CURRENT_USERSOFTWAREMicrosoftWindowsCurrentVersionSearch

If this works for all, great.

8] Check the basics

Make sure that you have set up Cortana correctly. If, after upgrading to Windows 10, you find that Cortana is not available in your region, this post titled Cortana not available can help you get Cortana on your Windows PC.

9] Automatic Repairs

If your PC prompts for Automatic Repair, continue with it and let Windows carry it out.

If you find that Cortana is not working properly, the best thing to do would be to kill the Cortana process and restart the process via Task Manager. If it were a minor runtime error, Cortana would take a restart to fix it.

11] Disable Antivirus software

Some security software is known to create this issue – Avast, for instance. Disable it and see if it makes the problem go away. If your security software is the culprit, make sure you are using its latest version – else, you may want to change it.

12] Create a new User Account

The problem might be associated with your Microsoft credentials. Try creating a new username and password and see if you can fix the Cortana. We need to remember that Cortana will not be switched on automatically and needs to be enabled by selecting the Cortana button on the taskbar.

13] Re-register the Cortana app

Open an elevated Powershell prompt, type the following command, and hit Enter:

If you feel, you may also try the other 2 of the 3 Windows Support, Solutions & Universal fixes.

The rebuilding will take some time, and once it is done, you can start searching for the files you need, and the Search should work properly. If you need more details, you will get them in this post titled Windows Search Indexer tips. See this post if you need to troubleshoot and fix Windows Search Indexer not working issues.

15] Uninstall programs that may affect the taskbar

If you are using Dropbox, uninstall it and see if it makes the problem go away.

If you have followed the above suggestions, your Windows Taskbar Search should hopefully have been fixed.

16] Run CTFMON.exe

It’s a Windows process that controls Alternative User Input and the Office Language bar. If the service stops running, you will have issues inputting the keyboard inputs, especially in an Asian language.

17] Change Keyboard Language

You can use a different language and check if it is working. If yes, then reinstall the language pack you use, and check how it works.

18] Enable Search Service 19] Use System Restore

If this happened recently, you could use System Restore to roll back to the date it was working before. Sometimes, a small change in the system causes it, including installing software that can interrupt search service.

20] Check your Internet connection

If you are using the search service that can show results from the internet, then make sure the internet connection is working on your computer.

21] Uninstall recent Windows updates

Windows updates are known to cause issues such as these. If you have recently installed an update, you should be able to uninstall it.

Posts that offer additional suggestions:

TIP: This post will help you if your WinX Menu is not working.

How To Fix Windows 10/11 Rollback Loop

How to fix Windows 10/11 rollback loop

534

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Since Windows 10 is a free upgrade Microsoft has left you the ability to roll back to the previous version of Windows if you’re not pleased with Windows 10. Unfortunately, a number of users reported that the rollback process is stuck on Windows 10 and that users are unable to revert back to an older version of Windows.

Windows 10 rollback stuck: How to fix it?

Not being able to rollback to the previous build of Windows can be a big problem, and speaking of issues, here are some common problems reported by users:

Windows rollback loop after update – According to users, sometimes you might get stuck in rollback look after a new update. To fix that, be sure to try some of our solutions.

Windows 10 rollback stuck on restarting – Sometimes your rollback can get stuck on restarting. If that’s the case, it might best that you leave your PC and let it finish the rollback.

Windows 10 downgrade stuck – In some cases, your PC might get stuck while downgrading. This can be a big problem, but you might be able to fix it by using the Legacy boot feature.

Windows 10 rollback stuck boot loop, black screen – If this problem appears, you might be able to fix it by running a couple of commands in Command Prompt.

Windows 10 rollback not working – If the rollback process isn’t working, one way to fix is to perform an in-place upgrade. By doing that, you’ll force Windows to update to the latest version and fix the problem.

Solution 1 – Force a restart or shutdown

A number of users reported that they are unable to roll back from Windows 10 and that they are getting stuck on a blue screen with a loading icon. This can be a big problem if Windows 10 isn’t working for you and if you want to revert to the older version. Few users reported that you can fix this problem simply by forcing a restart or a shutdown.

According to users, the rollback process is stuck and the hard drive indicator doesn’t show any activity. After the restart, the indicator will start blinking again and the rollback process should start working without any problems.

Solution 2 – Use Legacy Boot

Several users reported that the rollback process was stuck due to UEFI mode. According to the users, there was a problem with booting from a flash drive and DVD and that can sometimes prevent the rollback process.

To fix this issue you need to enter BIOS and change the Boot Mode from UEFI to Legacy. To do that follow these steps:

While your computer boots keep pressing the F2 or Del on your keyboard to enter BIOS. Some versions of BIOS use a different key, so you might have to repeat this step a few times before you find the right key.

Once you enter BIOS you’ll need to find Boot Mode and change its value from UEFI to Legacy. If you can’t find this option be sure to check your motherboard manual for detailed instructions.

Save changes and try to perform the rollback again.

READ ALSO: Rollback From Windows 10 for Free with This Software

Solution 3 – Use a hard drive image to restore your system

If you are familiar with hard drive images, you probably have a backup hard drive image created. If you don’t use any backup software, then you most likely don’t have a backup image of your hard drive, so you can skip this solution.

If you created your hard drive image before upgrading to Windows 10, you can simply back up your system by using that hard drive image.

Once again, this solution only works if you created a hard drive image before upgrading to Windows 10.

Yes, you can through this process called a Rollback that we discussed in this article. Missing rollback option? Check out our guide.

Solution 4 – Leave your computer running for a couple of hours

Sometimes rollback process can take a couple of hours to complete, and users reported that rollback will be completed after a few hours if you wait patiently. In some cases, the rollback process might encounter a restart loop, but leaving the computer for a few hours can sometimes fix the problem according to some users.

Solution 5 – Use Command Prompt

According to users, if your PC is stuck during the rollback process, you might be able to fix it by running a couple of commands in Command Prompt.

Since you won’t be able to boot to Windows, you’ll need to start Command Prompt outside of Windows and run the necessary commands. You can do that by following these steps:

Once the scan is finished, try to access Windows 10 again. If the problem is still there, you might need to run a couple of additional commands. To do that, follow these steps:

Repeat the steps above to open Command Prompt.

Once you open Command Prompt, run the following commands:

bootrec /fixmbr

bootrec /fixboot

bootrec /rebuildbcd

bcdboot c:windows /s c:

After the commands are executed, check if the problem is still there.

Solution 6 – Perform an in-place upgrade

Expert tip:

an empty USB flash drive (at least 8GB in size)

another working computer

To fix this problem, first, you need to download Media Creation Tool on another PC and run it. Now follow these instructions:

Now, wait while the Media Creation Tool creates a bootable media. After creating a bootable media, you can switch back to your PC. Connect the USB drive to the affected PC and do the following:

The setup process will now start. To upgrade your PC and keep your files, you just need to do the following:

Once you finish the setup, you should have the latest version of Windows installed, and everything should be exactly as you left it.

If Choose what to keep option isn’t available, it means that the ISO file isn’t the same as your version of Windows, so you’ll need to download a new ISO file, or continue and lose all your files on your system drive.

Solution 7 – Reinstall Windows

Sometimes the only solution is to reinstall Windows completely, and in order to do that, you’ll need Windows installation media. Bear in mind that reinstalling Windows will delete all files from your C drive, therefore we urge you to back them up.

If you cannot access Windows 10 due to a certain problem, you can always boot your PC from a Live Linux CD, and use Linux to find and back up your files.

To reinstall Windows 10, you just need to do the following:

Once the installation is finished, the problem should be resolved completely. Now you just need to move your files from the backup and you’re good to go. Keep in mind that this is a drastic solution, so you should use it only if other solutions can’t fix the problem.

This brings us to the end of this guide. But before we add the last punctuation mark, there are two important things we’d like to mention.

Exit and continue to Windows rollback loop

This is by far the most annoying and frequent issue that Windows 10 users may encounter. The OS initially asks users to exist any programs in order to go back to Windows. But this rarely works.

However, if you encounter this problem, try to shut down or restart your PC. Sometimes, this might help with the glitches and fix your problem. But in most cases, this error message stays on the screen even after users restarted or shut down their computers several times.

Choose an operating system Windows rollback

If the rollback attempt is successful, you will be asked to choose a previous operating system to go back to for the rollback. Usually, this is a restore point previously created.

But shortly after the rollback, Windows 10 might automatically search for updates. If you don’t want to repeat the whole rollback process all over again, don’t forget to disable automatic Windows 10 updates as soon as the rollback is completed.

Well, the rollback process can sometimes get stuck, and if that’s the case, we suggest that you try all solutions from this article.

Was this page helpful?

x

Start a conversation

How To Add Or Remove Keyboard Layout In Windows 11

Here is a tutorial on how you can add or remove keyboard layouts on your Windows 11 PC. You can easily set up and then add a new keyboard layout on your PC. Windows 11 provides you the flexibility to search, install, and add new keyboard layouts in multiple languages on your system. After adding your favorite keyboard layouts, you can easily switch from one layout to another using the taskbar. In case you need to remove any of the added keyboard layouts, you can do that too. Let us now check out the detailed procedure to add, remove, and switch between keyboard layouts on Windows 11.

How to Add Keyboard Layout in Windows 11

Here are the main steps to add a keyboard layout on Windows 11 PC:

Open the Settings app.

Go to the Time & language section.

Under the Language section, select the pre-installed language pack and tap on the three-dot menu present beside it.

Select Language options.

Choose the keyboard language from available ones to add a keyboard layout to the taskbar.

Let us discuss the above steps in detail now!

Firstly, you need to open the Settings app on your Windows 11 PC using the Windows + I shortcut key.

Read: How to reset Keyboard settings to default in Windows

After that, you can simply select the desired keyboard layout from the available and installed ones. As you do that, the selected keyboard layout will be added to the system tray on the taskbar.

In a similar manner, you can add multiple new keyboard layouts in Windows 11 and quickly access and switch between them as per your requirements.

See: Microsoft Keyboard Layout Creator: Create custom keyboard layouts

How to install new keyboard layouts in Windows 11?

You can install new keyboard layouts in your regional or preferred languages like Hindi, Japanese, Spanish, French, Afrikan, Korean, and more. Search and browse through a variety of keyboard layouts and then install and add the one you like in your Windows PC. To install new keyboard layouts in a specific language in Windows 11, you can follow the below steps:

Firstly, open the Settings app and then go to the Time & language tab from the left panel.

After that, on the right, press on the Language & region option.

Next, type a specific language in the search box and then select the desired keyboard layout from the search results.

Then, press the Next button, and finally, tap on the Install button to install the selected keyboard layout.

After installing the new keyboard layout, you can add and use it by following the steps we mentioned earlier in this article.

Related: How to remove Language Switcher Icon from Taskbar.

Can you change keyboard layout on Windows 11?

Yes, you can change the keyboard layout on Windows 11. There are different ways to open and switch between keyboard layouts in Windows 11. Here are the three common methods you can use to access all your keyboard layouts and then use the one you want:

Use shortcut key or hotkey to open keyboard layouts.

Open keyboard layouts from the Quick Settings panel.

Read: How to Change Key Sequence to Change Input Language in Windows 11

2] Use shortcut key or hotkey to open keyboard layouts

Another way to open up the keyboard layouts in Windows 11 is to use the Windows + Spacebar key combination. Press both the keys simultaneously and it will show you all the added keyboard layouts. You can then easily switch to a different keyboard layout as you need.

Alternately, you can also try the Shift + Alt hotkey to quickly switch from the current keyboard layout to another keyboard layout.

Read: Windows key + Space bar combination not working on Windows

3] Open keyboard layouts from the Quick Settings panel

How to Remove Keyboard Layout in Windows 11?

Now, if you need to remove a particular keyboard layout in Windows 11, you can do that using similar steps as we used for adding a keyboard layout. Here are the main steps to remove a keyboard layout in Windows 11 PC:

Firstly, launch the Windows 11 Settings app and then go to the Time & language tab at the left.

Now, press on the Language & region option present in the right panel.

Next, below the Language section, select the three-dot menu present next to the default language.

After that, tap on the three-dot menu present beside the keyboard layout you want to remove.

See: Keyboard layout error 0x8007012a or 0x80070057 in Windows RE

How do I remove automatically added keyboard layouts?

To remove automatically added keyboard layouts in Windows 11, use the method and steps we mentioned above in the article. In case Windows keeps adding Keyboard layouts without permission, you can enter a command in Powershell to remove them; refer to the aforementioned guide to know the command. Apart from that, you can disable the Let me use a different input method for each app window option under the Advanced keyboard settings.

See: Can’t remove a Keyboard layout in Windows computer

Where are keyboard layouts stored in Windows 11?

Windows 11 stores all the keyboard configurations in the Registry Editor. That being said, if you want to check the location, you need to open the Registry Editor first. Then, you can navigate to this path: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlKeyboard Layouts. After that, you need to open each value to find the configuration.

That’s it! Hope this article helps you add or remove specific keyboard layouts in Windows 11.

Now read:

How To Fix A Corrupt User Profile In Windows 10/11

How to fix a corrupt user profile in Windows 10/11

771

Share

X

Gaining access to your user profile means that you will always log in and find your PC set up just the way you like it, with settings and preferences accustomed to your needs.

Errors and corruption can make profiles become inaccessible, and this guide covers some of the things that you can do when that happens.

This article is part of a much larger hub regarding User Profile Errors, so don’t hesitate to visit it if you ever encounter such problems again.

Take a look at our dedicated User Profile page for more interesting articles on the matter.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Having a corrupt user profile on Windows 10 usually prevents you from logging in to Windows when booting your PC. This problem is usually signed by an error message.

Most people using Windows 10 usually create a user profile when they first install the operating system or they log in from the administrator account if they are the only ones using the PC.

Having a user profile on Windows 10 helps you customize your own settings when you login like the desktop theme, the installed programs you need only on that user profile or modify the sound settings of the system to your liking.

These are just a few features you might find useful that you can customize on your own user profile. Seeing that a lot of Windows 10 users are having trouble relating to corrupt user profiles I have decided to show you in a short tutorial below how exactly we can fix this issue.

How do I fix a corrupt user profile in Windows  10?

There are two ways we can fix corrupt user profile issues on Windows 10. The first method is to try and fix the corrupt user profile. This involves creating a new user profile from your administrator account.

1. Fix corrupt user profile using Regedit

We need to sign into the Administrator account at the start of the PC

If you do not have an administrator account active do the following: Boot into Safe mode, enable option built-in administrator, sign out and sign into administrator

Press Window button plus the R button (Windows + R)

In the Run dialog window you opened type in there regedit.

On the right side of the window you should have there ProfileImagePath, look at the value on the right of that name to see if you have the same user profile name you cannot access.

Now navigate to

C:Users

in File explorer and see if the name of the account you have there matches the name you have in the

ProfileImagePath

presented above.

Write the name you have in C:Users exactly as you have it in the ProfileList folder.

Delete the .bak you have in the name and press Enter on the keyboard.

Add .bk at the end of S-1-5-21-273154420-267531419-3735073706-1014 and press Enter on the keyboard.

Press Enter on the keyboard.

Press Enter on the keyboard.

In the Edit DWORD window under Value data write zero 0 

Do the last four steps above for the S-1-5-21-273154420-267531419-3735073706-1014 with .bak extension.

After you are finish close the Registry Editor window and reboot the PC.

Try to log into the account that you were having troubles with and see if it works.

Expert tip:

2. Create a new user profile

Log in with your administrator account (the steps are presented in the first tutorial).

Back up everything you don’t want to lose in the

C:Users

the user account you want to delete by copying it to another location on the hard drive.

Press and hold

Windows

button and the

R

button.

In the Run dialog box you opened type

regedit

If you get a message from User Account Controls UAC select Yes .

In the Registry Editor window on the right navigate to HKEY_LOCAL_MACHINE/SOFTWARE/Microsoft/Windows NT/CurrentVersion/ProfileList .

On the right panel look next to ProfileImagePath on the Data tab to see if there is the same user profile with problems.

If not , select the other S-1-5-21-273154420-267531419-3735073706-1014 without the bak extension.

After you deleted the folder exit the Registry Editor window.

Restart the PC and try to sign into the user profile you had problems with, if successful you will need to copy back the files you had moved to another location (step 2).

3. Fix corrupt user profile on Windows 10

A user profile cand also be fixed if not too damaged.  For more information, check out this dedicated guide on how to fix corrupt user profile issues on Windows 10.

There you have it, here are two ways you can try to sign in to your problematic user profile on Windows 10. If you’ve come across other solutions to fix this problem, feel free to list them below.

Was this page helpful?

x

Update the detailed information about How To Fix Slow Keyboard Response In Windows 11/10 on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!