You are reading the article How To Find The Serial Number For Your Hard Drive updated in December 2023 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Find The Serial Number For Your Hard Drive
How To Find The Serial Number For Your Hard Drive Get Serial Number Of Hard Drive Using WMIC Tool
If you have gathered system information previously in the past, like model number, manufacturer name and other hardware details then you may be well aware of WMIC tool. If not then we would like to tell you that WMIC that stands for Windows Management Interface Command, is an inbuilt Windows command tool that helps you to find the information of a system you are currently working on.
To find the serial number of hard drive using WMIC tool on your Windows 10 computer follow the steps below:
2. Now on the Command Prompt screen, type wmic diskdrive get serialnumber and hit Enter key of your keyboard.
As we stated earlier this tool helps you to get other hardware details. So, a slight change in the command will help you fetch the manufacturers name, model number etc. for your hard drive.
Note: Some users have also reported that running the above listed command does not display the information of the serial number for the hard drive. Then it means that the computer manufacturer has not saved the information to BIOS/UEFI Firmware.
But you need not to worry as there are other methods to find the serial number of the hard disk that we will discuss further.
Also Read: [Solved] External Hard Drive Is Not Showing Up On Windows 10?Find Serial Number of Hard Drive Using Windows PowerShell
PowerShell is another Windows tool that will help you to find the serial number of the hard drive attached to your computer.
3. Now press the Enter Key on your keyboard.
4. You will now be presented with the information about the serial number along with the Tag name for the hard drive of your computer.
You can also get the Tag number from Disk Management screen.Get Serial Number from the Label Attached on Hard Drive
If you do not find yourself comfortable with running the above listed commands then you have another option to get the serial number for the hard drive with a manual method.
However, to use this method you have to put in some physical work, i.e. open the back panel of your laptop or the cabinet in case you are using a PC.
Take a screwdriver to open the screws on the back panel of your laptop. Once done you will find the label that is attached to the hard drive. The serial number on the drive should be like
Note: The place where the serial number is mentioned will vary from the model of hard drive you are using. Like in some models it is mentioned at top left, in some models it is mentioned at middle right corner and so on. Also the additional information like manufacture name, size of the hard disk can also be found along with serial number. The amount of information will also vary from the model of the hard drive attached to your computer or laptop.Scan QR Code to Find the Serial Number of Hard Drive
It may be possible that the label attached on the hard drive is torn out or unreadable, then to get the serial number you can scan the QR code printed on the label.
The information you get by scanning the QR code is 100% authentic as each QR code is unique in itself and is connected with the serial number of the drive.
A user can easily scan this QR code to get the information about the genuineness and warranty of the product.
How to Find Computer Serial Number on Windows 10
Use Command Prompt Like A Pro – All About Command PromptQuick Reaction:
About the author
You're reading How To Find The Serial Number For Your Hard Drive
Nowadays, the serial number of every Apple product is very essential as you require the serial number to check the coverage of Apple products. Similarly, Apple AirPods Pro’s serial number is also very crucial as it is needed whenever you need to replace the broken AirPods.
Earlier Apple used to print the serial number on the back of the iPhone and Apple Watches, but nowadays you will not find the serial number on the back of the products. However, on Apple AirPods Pro serial numbers are displayed inside the charging cases.
But it will be a daunting task to read the serial number of Apple AirPods Pro because it may sometimes fade off or even the serial number may be too small to read. Therefore, in this article, we will show you three easy methods to find and check AirPods Pro’s serial number, in case if you find it difficult to retrieve the serial number which is displayed inside the charging case.
How to Check AirPods Pro Serial Number: Three Method Explained
If you search on the Internet, you will come across several methods to find the serial number of Apple AirPods Pro, but some of the methods are confusing and don’t work. In this section, we will discuss three easy ways to get the serial number of any AirPods Pro.
Each and every user who is facing trouble to retrieve the serial number of their AirPods Pro can efficiently execute all the methods which we are going to discuss below and can eventually get the serial number of their AirPods Pro without much fuss.
Method #1: Retrieve the Serial Number of AirPods Pro with the Help of your iPhone
Step #1. First and foremost, you need to connect your AirPods Pro with your iPhone.
Step #2. Once the AirPods Pro is connected with your iPhone, you need to go to the Settings of your iPhone and eventually tap on the “General” option.
Step #3. Now you need to tap on “About”, and then tap on the “AirPods Pro” option.
Step #4. Here you will be directed to a new screen where all the information about your AirPods Pro will be displayed including the serial number.
Note: Apart from the serial number, you will also find information about the manufacturer of your AirPods Pro along with its model number, hardware version, and firmware version.
If you still cannot find the serial number of your AirPods Pro even after following the first method successfully, you must immediately go for the second method given below.
Method #2: Check AirPods Pro’s Serial Number from the Packing Box
In this method, you need to find out the packing box of your AirPods Pro and eventually need to note down the serial number which will be definitely printed on the packing box.
Generally, users throw away the packing box after using the gadget for a long span of time, but if you can somehow get hold of your packing box, then you can easily find the serial number of your AirPods Pro.
Method #3: Find AirPods Serial Number from the Original Invoice of the AirPods Pro
You can also use the original invoice to get the serial number of your AirPods Pro. Moreover, the original bill will also be very beneficial for you in case the AirPods gets broken or damaged.
So without wasting much time, you need to grab the original bill of your AirPods Pro and write down its serial number in a safe area so that you can get the number whenever you require it in the future.
As promised at the beginning of this article, we have given the three most obvious methods to retrieve the serial number of any AirPods Pro. So, you must go through all the methods which are mentioned above and eventually select the best process as per your preferences.
You may want to take a peek at:
The founder of iGeeksBlog, Dhvanesh, is an Apple aficionado, who cannot stand even a slight innuendo about Apple products. He dons the cap of editor-in-chief to make sure that articles match the quality standard before they are published.
If you have an external hard drive or USB drive that you cannot format from File Explorer, you can check out this guide. It will help you to format the external hard drive or USB drive using Windows PowerShell. As you might already know that Windows PowerShell is an in-built tool, you do not need to install any third-party software.
Windows users can easily format an internal hard drive, external HDD or SSD, USB drive, etc. with the help of the in-built option. This option can be found in This PC or My Computer. Sometimes, this specific functionality can be a mess because of the corrupted hard drive or file, and you may not be able to format the drive. At such a moment, you have some other options. For example, you can use the Disk Management panel, Command Prompt, etc. to get the job done. Likewise, you can use Windows PowerShell to delete and create partitions, change the File system, etc. of your USB drive or hard drive.
Read: How to delete or format C drive using Command Prompt.What can you do using Windows PowerShell?
You can change the following things of an external hard drive or USB drive-
Format the hard drive
Change File system
Change drive letterFormat External Hard Drive using PowerShell
To format the external hard drive or USB drive using Windows PowerShell, follow these steps-
Plugin the USB or external hard drive to your computer
Open Windows PowerShell with admin privilege
Recognize the drive that you want to delete
Enter the command.
First, you need to plug in your external hard drive or pen drive so that your computer can do the job. After that, you need to open the Windows PowerShell with administrator privilege. For that, press Win+X, and select Windows PowerShell (Admin).
Now you need to identify the disk that you want to format. For that, enter the following command-Get-Disk
You should find the name of your external hard drive in the Friendly Name column. Also, you need to note down the number of the hard disk.
To initiate the process, enter this command-Clear-Disk -Number 2 -RemoveData
You need to replace the number 2 with the original number that is assigned to your drive. In this example, we want to format the Sony Storage Media (check the above screenshot), which is carrying the number 2. It might be different if your external hard drive is showing a different number.
Now you should get a confirmation message. Type Y and hit the Enter button.
It should take a couple of seconds to complete the process. Now, you need to enter the following command-New-Partition -DiskNumber 2 -UseMaximumSize -IsActive -DriveLetter Z
It will help you create a partition. Also, there are two things you should know about this command. First, the number 2 represents the drive that you formatted earlier. Second, the Z represents the drive letter that will be assigned to the external hard drive or USB drive.
After entering that command, a popup will appear to format your disk. You can use that popup window option, or you can use the following command-Format-Volume -DriveLetter Z -FileSystem FAT32 -NewFileSystemLabel USB
Here is one crucial thing that you should know. If you want to format the drive in the FAT32 file system, you need to choose that in the command. However, if you’re going to use the NTFS file system, the same command should look like this-Format-Volume -DriveLetter Z -FileSystem NTFS -NewFileSystemLabel USB
If you choose NTFS, it might take a couple of more seconds than FAT32.
After entering the last command, you will be able to use the external hard drive or USB drive regularly.
You can format USB Pen Drive using Command Prompt as well.
When you’re choosing a data recovery service, security is paramount. The recovery firm needs to assure you of its ability to keep your data confidential. It’s a good idea to work only with recovery companies that receive annual audits consistent with SOC Type II or SSAE 18 standards (which replace the older SAS 70 and SSAE 16 standards). As with other types of certifications, ask to see an official certificate or other proof of compliance, rather than just a logo on a website.
The best recovery companies have security guards, electronic door locks and video surveillance to limit (and record) who has access to your company’s drives and data. Plus, once the company has finished recovering your data, it needs to wipe every bit of your data from its computers. Using a multipass military-grade shredding program is a good step. Some firms will keep the data on a separate drive and then destroy that drive. Any firm should keep its copy of the data for several days to two weeks to be sure there are no problems and you don’t need another copy.
While some data recovery firms have intricate firewalls to keep hackers out of their computers (and your data), others take this approach a step further by working on your data only with computers that are not connected to the internet, thereby isolating your data from a dangerous online world.
Recommendations or third-party accreditations can also help in your data recovery decision. Check the firm’s BBB rating, and see whether the company is on the GSA contractor list.
Once you’ve chosen a data recovery service, the actual work can start. Many (though not all) companies send an overnight shipping label or a padded box for you to ship the broken drive.
For ultra-high-priority data, there are a couple of alternatives. Rather than having you overnight the device, some data recovery services send a courier to pick up the drive and maintain a chain-of-custody document for the device. This method is often faster and is potentially of interest for those involved in legal cases. However, even the larger recovery services have at most a few lab locations, so a courier service could be very expensive if you aren’t near a lab.
Another approach for drives that can’t leave your building is to have the data recovery experts come to your shop. Although this method gets pricey very quickly, it may be the only choice if you’re dealing with ultrasensitive data, such as product plans or matters of national security.
If the problem is with the software (rather than the hardware), some recovery firms can remotely connect and attempt to rescue your data.
When the recovery work is done and the data is restored, you need to get access to it as soon as possible. Most data recovery firms put the recovered data onto a clean drive and ship it to you, and once you receive it, it should take only a few minutes to add the recovered data to your digital infrastructure.
Many data recovery firms offer to transmit your data via a secure server. If you do this, make sure the data gets encrypted with at least AES-256 coding. Although this method can speed up the integration of files back into your company’s digital infrastructure, there is a downside: Many data recovery firms limit the amount of data they will transmit to between 5GB and 30GB.
There are a lot of software in internet, by which you can create and restore a backup of your hard drive but a large number among them does not work in Windows Vista/7. Often, at the time of restoration, the backup file made by a third party software either does not work or crash your operating system. So it’s preferable to create a backup by such a program which is provided by your operating system. Windows Vista/7 provides you this facility. Take a backup of your computer before system crash and store it in a safe location for restoration.
This article will discuss the method to create a clone of your hard drive or entire system including documents and settings, installed programs, registry settings, personal data etc. As a XML document file you can further process it. I hope since now you will never be in trouble when your computer will crash. You can also create a system repair disc which will help you in future to repair Windows 7.Backup Creating Procedure:
6. Now the backup creating process will start and take several minutes to finish. It will create the backup in XML document format.Restoring Backup Procedure:
I have tested the method in Windows 7 but it works in Vista also. Once the backup is created now you have to restore it.
3. Look at the window. There will be two options first one for restore your computer using the newly created image and the other for reinstalling by your Windows 7 disc. The previous files will be kept in a chúng tôi folder and you can further retrieve the files from here. Choose the first option to use the backup image.
7. The restoration process will start and it will take around 15 minutes.Quick Restore Procedure: System Repair Disc Creating Procedure:
2. A small window will open. Insert a blank DVD and hit the “Create disc” button to finally create the system repair disc. It will take a few minutes.
3. Boot the newly created DVD by restarting your computer.
4. Choose your language and select “Repair your computer” option.
I hope you will face no problem during the backup creating and restoring session. So don’t waste time and take a backup of your computer because near about 30000 viruses are launching per day.
Abhishek Palit is the administrator and author of Softtricks. He regularly writes there on Windows tips, blogging tips, software application, web application etc. Now he is a contributing writer in maketecheasier to share his experience with you.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
When you get a new USB drive and are about to format it before its first use, you may be wondering which of the available options, a.k.a. file systems, is the best.
While there isn’t a single best file system for USB drives in general, depending on what you use the USB drive for, one file system could be better than the rest. Here are some of the most important considerations before choosing a filesystem for a USB drive.1. What Is a File System?
First, before we go any further, let’s clarify what a file system is. A file system is a piece of software that controls how data on a media is stored and retrieved. A file system manages operations such as copying, moving, and deleting files on a drive.
A file system is different from an operating system – in a sense, a file system runs atop an operating system and depends on it for many operations with the underlying hardware. Each of the major operating systems (e.g. Windows, MacOS, Linux) can work with various file systems (natively or through third-party tools).2. How Do You Plan to Use Your USB Drive?
Basically, the most important considerations regarding your choice of a file system for your USB drive are which operating systems you plan to use it with and how large the files you will most likely transfer are.
If you will be using your USB media mostly on Windows devices, you can go with FAT32, exFAT, or NTFS. FAT32 and NTFS run with Linux, too, but exFAT requires additional tools. If you will be using the drive on Linux devices only, you can add its native EXT 2, 3, or 4 to the mix. As for MacOS, it can natively run FAT 32, works with exFAT, too, but you will need additional tools for NTFS, and its native file system is HFS+ (and the latest APFS), not EXT.
As you see, FAT 32 and to some extent NTFS, are present on all major OSes. They are not interchangeable and have their differences, as I will explain next – the main point here is the file size of the files you will be transferring because FAT 32 is limited to 4GB per file.3. FAT32 vs. exFAT vs. NTFS vs. HFS vs. EXT 2, 3, and 4
There are really many file systems out there, and if you are curious, you can try a few of them before you land on the familiar ones.
However, your choices for a USB file system basically boil down to these:
FAT32. FAT32, or File Allocation Table 32, is the file system that typically comes preinstalled on a USB drive. It was the Windows standard before NTFS. FAT32 is slower than NTFS, less secure, and has a 4GB limit per file, but it is widely recognized by all major operating systems. If you will be using the USB drive in a highly heterogeneous environment, and portability is your main concern, FAT32 is your option.
exFAT. exFAT, or extended File Allocation Table, is the newer version of FAT32. It’s lightweight but doesn’t have journaling. It’s compatible with Microsoft and MacOS but needs additional tools with Linux. It doesn’t have the 4GB limit per file restriction like FAT32.
HFS+. The Hierarchical File System (HFS+) is the default file system in the macOS world. If you are going to use your USB drive on Mac devices mainly, choose this file system. HFS+ can be used with Windows and Linux, but if you need a multi-OS file system, you definitely have better choices.
EXT 2, 3, and 4. The extended file system is the native for Linux. Similarly to HFS+, you can use it with the other operating systems but it’s not your best option. Use this file system if you are using the USB device on Linux computers mainly.
Most of these USB file systems run with multiple operating systems – e.g. Windows, macOS, Linux, etc., – so usually your choice isn’t limited to just one USB file system. If you don’t have large files to deal with, you have even more options. If speed of transfer isn’t a top priority either, there are even more choices. And if it turns out your first choice of a USB file system wasn’t the best, you can always reformat the drive, provided there is no valuable data on it, of course.
I am a fulltime freelancer who loves technology. Linux and Web technologies are my main interests and two of the topics I most frequently write about.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Update the detailed information about How To Find The Serial Number For Your Hard Drive on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!