Trending February 2024 # How Does Panic Work In Go Language With Examples # Suggested March 2024 # Top 9 Popular

You are reading the article How Does Panic Work In Go Language With Examples updated in February 2024 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How Does Panic Work In Go Language With Examples

Introduction to Golang Panic

Web development, programming languages, Software testing & others

Syntax

Below is a simple syntax for the panic in the go language, here we can call according to correct conditions, so for example if we are going to read the name of the user and the name is nil, in that case, there may be possible that it will throw an error, so we can check the condition and call the panic function with the message which we want to show the external user. To use the panic we need to import it as along with the function at the initial time, and we can pass the parameters to a function and perform the checking of the functions and we can decide the condition on which we have to call the panic function. Like param==nil and call the panic function.

Please see the below syntax here the message can be any proper error message like “Null value not allowed” etc.

func panic(Message ) How does Panic Work in Go Language?

Before discussing the working of the panic we need to understand why we need the function panic? Suppose you are going to display the name of the users from the array of the data and the array contains the many users and in some cases any username is blank and we are performing some operation in that case nil will throw an error which will halt the execution of the whole program. So to deal with such types of situations we use the panic to handle just like any other programming language exceptions. We can explain the working of the panic in the following steps.

We need to import the panic package within the function and we can pass some params also to the function.

We can call the function and inside the function, we can write the conditions when the panic will get called and the message also we can write which we wanted to display in case of any error or exception.

That we can pass any kind of argument, it can be any string of the message or it can be some other kind of numeric data.

In very simple words I can tell you if anything which we want to handle dynamically then we can use the panic function of the go language.

Remember the panic is a builtin function inside the language which we need to import to use.

Examples of Golang Panic

Below are some of very simple examples where we are showing examples without the panic and what changes will come after we use the panic to handle the situations like using the array more than the size of the array and passing nil as the params. In case if we want to execute the below examples we can make a file with any name like chúng tôi and we can run the command go run chúng tôi and we get the output for the executions.

Example #1

Below is a simple example where we are not handling any condition and we have defined the size of the array as the 4 and we are trying to print the 5th value which is throwing an error as we said here we are not handling error so we can see the unhandled error in that condition. We can see the below example along with the screen of the output for this case.

Code:

package main import "fmt" func main() { var myname [4]string myname[0] = "Sujoy" myname[1] = "Vijay" myname[2] = "Akash" myname[3] = "Sujit" fmt.Println("Attributes of the given array is:") fmt.Println("First attribute is: ", myname[0]) fmt.Println("Second attribute is: ", myname[5]) }

Output:

Example #2

In the below example we are handling the nil value with the help of the panic function.

Code:

package main import "fmt" func build(the_type *string, name *string) { if the_type == nil { panic("Error: Type of education can not be nil") } if name == nil { panic("Error: Language name cannot be blank") } fmt.Printf("Programing language name is: %s n Language Name is: %sn", *the_type, *name) } func main() { the_type := "Programing" build(&the_type, nil) }

Output:

Example #3 package main import "fmt" func build(the_type *string, name *string) { if the_type == nil { panic("Error: Type of education can not be nil") } if name == nil { panic("Error: Language name cannot be blank") } fmt.Printf("Programing language name is: %s n Language Name is: %sn", *the_type, *name) } func main() { the_type := "Programing" defer fmt.Println("We are using the defer function in main") build(&the_type, nil) }

Output:

Example #4

Below is an example where we are handling the nil condition with panic.

package main import "fmt" func call(user_type *string, name *string) { if user_type == nil { panic("Error: User type can not be nil") } if name == nil { panic("Error: User name cannot be blank") } fmt.Printf("User Type  is: %s n User Name is: %sn", *user_type, *name) } func main() { user_type := "Programing" defer fmt.Println("We are using the defer function in main") call(&user_type, nil) }

Output:

Recommended Articles

This is a guide to Golang Panic. Here we also discuss the introduction, syntax, and working of panic in the go language along with different examples and its code implementation. You may also have a look at the following articles to learn more –

You're reading How Does Panic Work In Go Language With Examples

How Does Trait Work In Scala With Programming Examples

Introduction to Scala Trait

Trait in Scala can be created by using trait keyword. Scala traits are like Interface in Java. They contain methods and field members. Method inside trait can be abstract and non-abstract and we can use these methods into different classes. But we cannot instiantie traits and it does not have constructor parameters. They basically are used to provide abstraction which provide us security and makes our application loosely coupled by making our service independent of user. We can use extend keyword to use this trait with different classes and provide implementation of unimplemented methods if needed. If we do not provide method body and type of variable then by default they will be abstract.

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

trait name{ }

In above syntax we can create raid by using trait keyword before the trait name. Inside trait we can define our methods and field members.

Example:

Code:

trait FirstTrait { def message() def message2() }

In the above example we are defining two methods inside trait, but we have not yet provided them implementation.

So any class which is going to implement is responsible to provide the implementation of methods like below:

Code:

class FirstDemo extends FirstTrait{ def message() { println("first message : Hello from first method.") } def message2() { println("second message: Hello from second method.") } object Main { def main(args: Array[String]) { val object= new FirstDemo(); obj.message(); obj.message2(); } }

Now we have given implantation of both the methods also we have main method from which we are going to call the method. Remember trait cannot be instiantied they do not have parameter constructor.

How does Trait work in Scala?

Basically the concept of traits used in object oriented programming language, they are like interface in java. In java interface are meant for abstraction. As we all know abstraction is the process by which hide the complexity from the user we are doing same here as well. Traits can be extended by using extends keyword. But we cannot create object of trait because they have no contractor. To provide implementation and to use the methods define in traits we can inherit trait by using classes and objects.

Traits contain abstract and non-abstract methods or we can say contain concrete methods. If we provide implementation of method inside a trait then it would be a non-abstract method, but if we only define a method inside a trait then it would be an abstract method. It also contains filed variables inside it. We can define a variable inside trait using var or val keyword provide by Scala. Suppose you have defined a variable using mentioned keyword but we have not yet initialize it then it would be abstract by default. The implementation of variable is also take care by the class itself which implements this trait same like methods.

Another point is, if we have defined one method inside trait and another class extending this trait but not providing its implementation then this class has to make itself abstract this is same as java.

Example:

Code:

trait Test{ def getDetail() } abstract class Demo extends Test{ def printDetail(){ } }

Now if a trait contain a method that is not abstract which means its implementation is already been defined in the trait then in this case then class which extend this trait do not need to provide the implementation of method.

Example:

Code:

trait Test { def details(){ println("this method is already been defined in trait itself."); } } Examples of Scala Trait

Given below are the examples mentioned:

Example #1

Here we will see how to use abstract method and provide their implementation and another class using extend keyword.

Code:

trait Flower { def getColor() } class Rose extends Flower{ def getColor(){ println("Rose : are red in color!!") } } class Amaryllis extends Flower{ def getColor(){ println("Amaryllis : are pink in color!!") } } object Main{ def main(args:Array[String]){ var r = new Rose() r.getColor() var a = new Amaryllis() a.getColor() } }

Output:

Example #2

Code:

trait Flower { def getColor() def getMessage(){ println("This is flower trait!") println("If you wannt to know abut specific color go implement this tarit.:)") } } class Rose extends Flower{ def getColor(){ println("Rose : are red in color!!") } } class Amaryllis extends Flower{ def getColor(){ println("Amaryllis : are pink in color!!") } } object Main{ def main(args:Array[String]){ var r = new Rose() r.getColor() var a = new Amaryllis() a.getColor() a.getMessage() } }

Output:

Example #3

This example contains field members also. We have initialize the filed at trait level only, but if you want you can define them with ‘var’ or’ val’ keyword and provide their implementation in extended class.

Code:

trait Flower { def getColor() def getMessage(){ println("This is flower trait!") println("If you wannt to know abut specific color go implement this tarit.:)") } var v1: String = "Hello i am a variable" var v2: String = "I am second variable." def getDeatil(){ println("variable first :: " + v1) println("variable second :: " + v2) } } class Rose extends Flower{ def getColor(){ println("Rose : are red in color!!") } } class Amaryllis extends Flower{ def getColor(){ println("Amaryllis : are pink in color!!") } } object Main{ def main(args:Array[String]){ var r = new Rose() r.getColor() var a = new Amaryllis() a.getColor() a.getMessage() a.getDeatil() } }

Output:

Conclusion

Traits are like interface in java use to provide abstraction. They can we extend by using extends keyword but cannot be instantiated because they do not contain argument constructor.

Recommended Articles

We hope that this EDUCBA information on “Scala Trait” was beneficial to you. You can view EDUCBA’s recommended articles for more information.

How Does Index Works In Perl With Examples?

Introduction to Perl index

The index is the function available in Perl to get the index. If we want to know the index or the position of the substring, then we can use this function to get the value. By the use of the index function, we can also get the position of the character in the string. In the short index, the function is used to get the position or index where the substring or character is placed in the given string; inside index methods, we just have to pass our parameters. In the coming section, we will discuss this method more in detail to better understand the method to use.

Start Your Free Software Development Course

Syntax

We can directly use this function in the program without including any library because it is an inbuild function available in Perl to deal with String. Let’s see its syntax for better understating how to use it in programming see below;

1. index(text, substring, index): calculating with index.

In the above syntax, we are passing three parameters as the input. The last parameter is not mandatory to pass.

2. index(text, substring): without index being passed.

In the above syntax, we pass two parameters as input to calculate and return us the value.

index("String to find from", "string to search"); index("some string", "some",0)

Above, you can see the sample syntax for the index method to use in Perl programming.

How does index work in Perl?

As of now, we know that index is used to get the position of the element in the string. This method can take two or three parameters. We have some scenarios where we want to know the actual position of the character or any substring into the string so we can call this method and get the position. By the use of this method, we can even specify the index of the substring from which we want them to evaluate the position. In this section, we will first discuss the method signature of the index and return type. Let’s see the signature of the method in detail see below;

1. index(text, substring, index): This method takes three parameters as the input. By using this method, we can get the actual position of the character or substring inside a string message. Let’s discuss its signature in detail;

text: This parameter is used to pass our actual string from which we want to calculate our character or substring position value. We can create a normal string in Perl and pass this inside the method.

substring: This parameter is the original substring that we want the index() method to calculate its value and return the position for that element in a given string.

index: This is the optional parameter in this method. If you want to set the starting index for the substring, then mention this parameter while calling the index() method in Perl. If we do not mention it, it just takes up the default value of ‘0’.

2. index(text, substring): This method is also used to get the index of the substring. But it has one difference from the above one is that here we are not mentioning the index or the starting index for a substring so that it will take up as default of ‘0’.

Apart from all this, all the things are similar in both the methods available in Perl. These are the in-build method of Perl, so we do not need to mention or import any library in our project before using it. Let’s see one sample example for beginners how to use this in programming see below;

Example:

# Your code here! $mystr = "Hello to find !!";. $myresult = index ($mystr, 'find');

In the above lines of code, we are trying to find a substring into the string. First, we have created one string object and assign it some value. After this, we call the ‘index’ method and pass our string inside it with the value to be searched as ‘find’ in the string. So it returns us an integer value with its actual position in the string.

Examples

Different examples are mentioned below:

Example #1

In this example, we are using the index method without index param to get the substring position in Perl.

Code:

# Your code here! $mystr1 = "I am first string "; $mystr2 = "I am second string "; $mystr3 = "I am third string "; $mystr4 = "I am fourth string "; $mystr5 = "I am fifth string "; $myresult1 = index ($mystr1, 'first'); $myresult2 = index ($mystr2, 'second'); $myresult3 = index ($mystr3, 'third'); $myresult4 = index ($mystr4, 'fourth'); $myresult5 = index ($mystr5, 'fifth'); print "Result for each string are :::n"; print "One: $myresult1n"; print "two: $myresult2n"; print "three: $myresult3n"; print "four: $myresult4n"; print "five: $myresult5n";

Example #2

In this example, we are using the index method with index param to get the substring position in Perl.

Code:

# Your code here! $mystr1 = "I am first string "; $mystr2 = "I am second string "; $mystr3 = "I am third string "; $mystr4 = "I am fourth string "; $mystr5 = "I am fifth string "; $myresult1 = index ($mystr1, 'first', 3); $myresult2 = index ($mystr2, 'second', 2); $myresult3 = index ($mystr3, 'third', 1); $myresult4 = index ($mystr4, 'fourth'. 1); $myresult5 = index ($mystr5, 'fifth', 0); print "Result for each string are :::n"; print "One: $myresult1n"; print "two: $myresult2n"; print "three: $myresult3n"; print "four: $myresult4n"; print "five: $myresult5n";

Output:

Conclusion

We may have some scenarios where we need to have the actual position of the substring from the string so we can use the index() method in Perl. We can also evaluate the position of the character by using the same method in Perl. Also, this can help me know whether the character or substring is present in the string or not.

Recommended Articles

This is a guide to the Perl index. Here we discuss How does index work in Perl and Examples along with the codes and outputs. You may also have a look at the following articles to learn more –

How Does Angelscript Work With Example

Introduction of AngelScript

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

Why do we Need AngelScript?

AngelScript is needful because it is a powerful object-oriented scripting language like c/c++. It has an extremely flexible cross-platform scripting library; hence the scripts or a computer program written can work on any platform, and the scripting library is designed to improve the functionality of the script; by using it, users can extend the functionality with the help of external scripts.

It also has a feature that we can call the c and c++ functions within the angel-script environment; due to that, it is helpful to the developers to work with it, and the syntax of the angel-script class was closely followed by the syntax in c++ classes. So that it is needful for developers who are worked with c++ and they have to work on angel-script, then they can work easily.

Angelscript can be used in robotics that means the behavior rules of robotic are followed by angel-script. Also, it is useful for video game development, which increases the life of a game. So by using angle-script, get the project up, and that will run faster. And by using an external script, we can improve the functionality of the application.

How does AngelScript Work?

First, we need the application of angel-script and then have to register the interface so that script can interact with the application; the interface contains functions, variables, and classes also.

Secondly, we have to set message call back to receive information about errors, errors in human-readable form, because if the registration is not done correctly, then attention message will get as a callback message about the incorrect registration or a script has an error that fails to compile. If we need to verify the return code, there is no need to take much effort to know it because the call-back message can give information in the human-readable form so that we can correct it. These two steps are about engine configuration.

After engine configuration next step is to compile the script that should be executed. Also, need to write a function to call the registered print function and will give the output that function is stored in files.

In this step, has to write code for loading script files and to compile it, there is a CSriptbuilder define it, which help to load the file, it will perform some necessary process, and it will tell the engine to build a script module, also need to construct builder code for processing. If the code fails after this, then it will not have the memory to allocate the module. If the filename has been removed or the wrong name was given, or there is some unnecessary code has been written, then the builder was not able to load the file.

The last step is to identify the function which was defined that is to be called and have to set up the context for execution in code format. If that function could not be found, then need to write a print function to show a message of the function expecting.

Then has to create context, prepare it, and then execute it; if the execution didn’t work as expected, there is a need to write an exception code to handle the exception.

Example of AngelScript

Below is a very simple example that will give a brief overview of Handle:

}

Advantages

It has features like c/c++ that is static-typing, that uses the same static type as we use in c/c++ to make typing dynamic, and only additional type that we need to register here in angel-script.

It has an object handle feature that provides pointers, but pointers are not safe in scripting; hence it uses object handles instead of pointers; object handles in scripting control the lifetime of the object.

It has mod support in-game logic where it increases the life of the game.

Angelscript supports native calling conventions on major platforms, but there are some platforms that only work with generic calling conventions; generic calling is pure C++ that works everywhere.

The CScriptString used in angel-script cannot return the object value in native mode, which is not compatible.

There may be a memory leak issue.

Conclusion

In this article, we conclude that it is a scripting language and that has information about the application to accurately communicate with the c/c++ code; it has an inbuilt library hence making scripting language in our project is easy; in this article, we have seen some reasons to develop our program in more than one language.

Recommended Articles

How Does Authentication Work In Java

Introduction to Authentication Java

Authentication java is a term of the security to identity confirmation of web applications. It is a function to confirm user identification of the websites & web applications using a programming language. It confirms the users’ use and permits them to access the website, application, and software-related products using Java technology. It is a security method to identify the authorized user and give permission to use the application using the security terms of the Java language.

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

It is a client and server-side function to use unique content and confirm with a security password and user identity. It is used the user id and password on the client side and accesses the server-side data with true identification using a Java programming language. It is a documentation process to keep a secure web application and use only accessible team members.

Syntax

In this syntax, the application uses a username and password for authentication.

public class AppSecurityConfig extends AppSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder authentic) throws Exception { UserBuilder userid = User.withDefaultPasswordEncoder(); authentic.inMemoryAuthentication() .withUser(usersid.username("merry").password("[email protected]").roles("student")) } @Override http.authorizeRequests() .antMatchers("/").hasRole("student") .and() .formLogin() .loginPage("/useLoginPage") .loginProcessingUrl("/authenticatationUser") .permitAll() .and() .logout().permitAll(); } } How does Authentication work in Java?

Use web application with security and login form. This form redirects to the JSP page.

<form:form action="${pageContext.request.contextPath}/authenticateUser"

Use a web application for authentication of the login form. This form redirects to the JSP page.

Use Java authentication syntax using java spring frameworks. Java uses Spring security to authenticate the authority.

public class AppSecurityConfig extends AppSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder authentic) throws Exception { UserBuilder userid = User.withDefaultPasswordEncoder(); authentic.inMemoryAuthentication() .withUser (usersid.username ("merry") .password ("[email protected]") .roles ("student")) } @Override http.authorizeRequests() .antMatchers("/") .hasRole("student") .and() .formLogin() .loginPage("/useLoginPage") .loginProcessingUrl("/authenticatationUser") .permitAll() .and() .logout().permitAll(); } } Examples of Authentication Java

Given below are the examples:

Example #1

The basic example is shown below.

Code:

File: authenticationApp.java

public class authenticationApp extends AppSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder authentic) throws Exception { UserBuilder userid = User.withDefaultPasswordEncoder(); authentic.inMemoryAuthentication() .withUser (usersid.username ("sunny") .password ("[email protected]") .roles ("student")) } @Override http.authorizeRequests() .antMatchers("/") .hasRole("student") .and() .formLogin() .loginPage("/useLoginPage") .loginProcessingUrl("/authenticatationUser") .permitAll() .and() .logout().permitAll(); } }

File: main_login.jsp

<form:form action="${pageContext.request.contextPath}/authenticateUser" File: authentication.jsp

Output:

Output

Here, you see single-user authentication in a single user name.

The “Sunny” accesses only the student portal with Java authentication.

You get the single form for a single authentic user.

Example #2

Two authentications in the Java example and output are shown below.

Code:

File: authenticationApp.java

public class authenticationApp extends AppSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder authentic) throws Exception { UserBuilder userid = User.withDefaultPasswordEncoder(); authentic.inMemoryAuthentication() .withUser (usersid.username ("merry") .password ("[email protected]") .roles ("student")) .withUser(users.username("sam") .password("[email protected]") .roles("student", "teacher")) } @Override http.authorizeRequests() .antMatchers("/").hasRole("student") .antMatchers("/teachers/**").hasRole("teacher") .and() .formLogin() .loginPage("/useLoginPage") .loginProcessingUrl("/authenticatationUser") .permitAll() .and() .logout().permitAll(); } }

File: main_login.jsp

<form:form action="${pageContext.request.contextPath}/authenticateUser" File: authentication.jsp

Output:

Output:

Explanation:

Here, you see two authentications in a single user name.

The “sam” accesses the teacher and student portal with Java authentication.

You get the single form for multiple authentic users.

Example #3

Code:

File: authenticationApp.java

public class authenticationApp extends AppSecurityConfigurerAdapter { @Override protected void configure(AuthenticationManagerBuilder authentic) throws Exception { UserBuilder userid = User.withDefaultPasswordEncoder(); authentic.inMemoryAuthentication() .withUser (usersid.username ("merry") .password ("[email protected]") .roles ("student")) .withUser(users.username("sam") .password("[email protected]") .roles("student", "teacher")) .withUser(users.username("Ram") .password("[email protected]") .roles("student", "teacher", "principle")) } @Override http.authorizeRequests() .antMatchers("/") .hasRole("student") .antMatchers("/teachers/**").hasRole("teacher") .antMatchers("/principles/**").hasRole("principle") .and() .formLogin() .loginPage("/useLoginPage") .loginProcessingUrl("/authenticatationUser") .permitAll() .and() .logout().permitAll(); } }

File: main_login.jsp

<form:form action="${pageContext.request.contextPath}/authenticateUser" File: authentication.jsp

Output:

Output:

Explanation:

Here, you see multiple authentications in a single user name.

The “Ram” accesses the teacher, student, and admin portal with Java authentication.

You get the single form for multiple authentic users.

Conclusion

Authentication in Java provides security, safety, and privacy of the data and authority. The authentication uses for accessing part of the database to respective users and authorities. It becomes easy, attractive, user-friendly, and elegant websites and web applications. This function sorts the documentation per the user’s identity and returns only the required data. It helps to get complicated information easily without disturbing others’ privacy.

Recommended Articles

We hope that this EDUCBA information on “Authentication Java” was beneficial to you. You can view EDUCBA’s recommended articles for more information.

How Does Listview Work In Javafx?

Introduction to JavaFX ListView

JavaFX ListView is a class used to choose one or more choices from the list. ListViewclass is available within scene.control.ListView package. ListView allows us to add as many elements as we want. The user may additionally add elements to ListView either horizontally or vertically. ListView can be allowed to add images to the list values. ListView is used to select single or multiple values at a time.

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

Real-Time Example: While installing any application into the Windows PC, many features are there to select. But we didn’t choose all the features because we are choosing the feature because we are allowing additional software to install in the background. So, we choose the required features from the list. In this case, we can use the ListView Multi-select option.

How does ListView work in JavaFX?

Accessing JavaFX features user-defined class must extend the Application class.

Step 1: In JavaFX, creating is the first step. ListView can instantiate by using the new keyword.

Syntax:

ListFView listViewRef=new ListView();

Step 2: Adding elements or items to thelistViewRef is the second step. Items can be added in 2 ways:

1. By using add() Method

Syntax:

listViewRef.getItems().add(“item-name”);

getItems(): Used for showing the list item to the user.

2. By using ObservableList Class

Syntax:

FXCollections.observableArrayList(): Takes the all possible Typed list of items.

Note: A recommended way to add the elements to the ListView is ObservableList. Because, This ObservableList, by default observed with the ListView, allows any changes that occur inside the Observable list and updates the ListView automatically.

Step 3: The third step is to create a horizontal or vertical box to add the items.

Syntax:

HBox hBox=new HBox(); VBox vBox=new VBox();//Gives vertical box

Step 4: Creating a scene means screen to display output is the fourth step.

Syntax:

Scene screen = new Scene(hBox or vBox, length, width);

Step 5: Adding a Scene reference screen to the Stage object reference is the fifth step. We are adding an output screen to Stage. We will get this stage object reference from the start predefined JavaFX method.

Syntax:

stage.setScene(screen);

Syntax:

stage.show(); Examples of JavaFX ListView

Following are the different examples of JavaFX Listview.

Example #1 – Adding Items Horizontally to the ListView

Code:

import javafx.application.Application; import javafx.scene.Scene; import javafx.scene.control.ListView; import javafx.scene.layout.HBox; import javafx.stage.Stage; public class AddingItemsListView extends Application { @Override public void start(Stage displayScreen) throws Exception { /* create list object */ /* adding items to the list view */ listViewReference.getItems().add("First Item"); listViewReference.getItems().add("Second Item"); listViewReference.getItems().add("Third Item"); listViewReference.getItems().add("Fourth Item"); listViewReference.getItems().add("Fifth Item"); /*making list view horizontal*/ listViewReference.setOrientation(Orientation.HORIZONTAL); /* creating horizontal box to add item objects */ HBox hbox = new HBox(listViewReference); /* creating scene */ Scene scene = new Scene(hbox, 400, 200); /* adding scene to stage */ displayScreen.setScene(scene); /* display scene for showing output */ displayScreen.show(); } public static void main(String[] args) { /*launch method calls internally start() method*/ Application.launch(args); } }

Output:

Explanation: As you can see from the output, items are added horizontally. You can scroll the scroll bar to see more items like in the output.

Example #2 – Adding Items Vertically to the ListView

Code:

import javafx.application.Application; import javafx.scene.Scene; import javafx.scene.control.ListView; import javafx.scene.layout.VBox; import javafx.stage.Stage; public class AddingItemsListView extends Application { @Override public void start(Stage displayScreen) throws Exception { /* create list object */ /* adding items to the list view */ listViewReference.getItems().add("First Item"); listViewReference.getItems().add("Second Item"); listViewReference.getItems().add("Third Item"); listViewReference.getItems().add("Fourth Item"); listViewReference.getItems().add("Fifth Item"); /* creating vertical box to add item objects */ VBox vBox = new VBox(listViewReference); /* creating scene */ Scene scene = new Scene(vBox, 220, 270); /* adding scene to stage */ displayScreen.setScene(scene); /* display scene for showing output */ displayScreen.show(); } public static void main(String[] args) { /*launch method calls internally start() method*/ Application.launch(args); } }

Output:

Explanation: As you can see from the output, items are added vertically. By default alignment of the list, the view is vertical.

Example #3 – Select Multiple Items from the ListView

Code:

import javafx.application.Application; import javafx.scene.Scene; import javafx.scene.control.ListView; import javafx.scene.control.SelectionMode; import javafx.scene.layout.VBox; import javafx.stage.Stage; public class SelectingMultipleItemsListView extends Application { @Override public void start(Stage displayScreen) throws Exception { /* create list object */ /* adding items to the list view */ listViewReference.getItems().add("First Item"); listViewReference.getItems().add("Second Item"); listViewReference.getItems().add("Third Item"); listViewReference.getItems().add("Fourth Item"); listViewReference.getItems().add("Fifth Item"); /*Make listview to select multiple values*/ listViewReference.getSelectionModel().setSelectionMode(SelectionMode.MULTIPLE); /* creating vertical box to add item objects */ VBox vBox = new VBox(listViewReference); /* creating scene */ Scene scene = new Scene(vBox, 220, 270); /* adding scene to stage */ displayScreen.setScene(scene); /* display scene for showing output */ displayScreen.show(); } public static void main(String[] args) { /*launch method calls internally start() method*/ Application.launch(args); } }

Output:

Example #4 – Adding Items to the ListView

Code:

import javafx.application.Application; import javafx.collections.FXCollections; import javafx.collections.ObservableList; import javafx.scene.Scene; import javafx.scene.control.ListCell; import javafx.scene.control.ListView; import javafx.scene.image.Image; import javafx.scene.image.ImageView; import javafx.scene.layout.VBox; import javafx.stage.Stage; public class AddingImagesToItemsListView extends Application { /*loading images with their paths*/ private final Image cabinetImage  = new Image("Cab.png"); private final Image docIconImage  = new Image("documenticon.png"); private final Image homeCabImage  = new Image("HomCab.png"); private final Image searchIconImage = new Image("searchicon.png"); /*image array to load all images at a time*/ private Image[] imagesArray = {cabinetImage, docIconImage, homeCabImage, searchIconImage}; @Override public void start(Stage displayScreen) throws Exception { /* create list object */ /* adding items to the list view */ "Fourth Image"); listViewReference.setItems(elements); /*setting each image to corresponding array index*/ /*view the image class to display the image*/ private ImageView displayImage = new ImageView(); @Override public void updateItem(String name, boolean empty) { super.updateItem(name, empty); if (empty) { setText(null); setGraphic(null); } else { if (name.equals("Fist Image")) displayImage.setImage(imagesArray[0]); /*setting array image to First Image*/ else if (name.equals("Second Image")) displayImage.setImage(imagesArray[1]);/*setting array image to Second Image*/ else if (name.equals("Third Image")) displayImage.setImage(imagesArray[2]);/*setting array image to Third Image*/ else if (name.equals("Fourth Image")) displayImage.setImage(imagesArray[3]);/*setting array image to Fourth Image*/ setText(name); setGraphic(displayImage); } } }); /* creating vertical box to add item objects */ VBox vBox = new VBox(listViewReference); /* creating scene */ Scene scene = new Scene(vBox, 220, 270); /* adding scene to stage */ displayScreen.setScene(scene); /* display scene for showing output */ displayScreen.show(); } public static void main(String[] args) { /* launch method calls internally start() method */ Application.launch(args); } }

Output:

Explanation:

First, paste all the images to the eclipse src folder, then give their names in the Image class.

Now you can see the output in the above image.

Recommended Articles

This is a guide to JavaFX ListView. Here we discuss the Introduction and how does ListView works in JavaFX, along with different examples and code implementation. You may also look at the following articles to learn more –

Update the detailed information about How Does Panic Work In Go Language With Examples on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!