Trending February 2024 # Apple Watch Not Pairing? 7 Things To Try # Suggested March 2024 # Top 8 Popular

You are reading the article Apple Watch Not Pairing? 7 Things To Try updated in February 2024 on the website Achiashop.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Apple Watch Not Pairing? 7 Things To Try

The Apple Watch is one of the most impressive pieces of technology in the modern age. It’s a fitness tracker, communication device, and encyclopedia all on your wrist. You can stay in touch with family, control your smart home, and much more with just a few taps.

Of course, the Apple Watch relies on Bluetooth to pair with your phone, and sometimes Bluetooth doesn’t work as intended. If your Apple Watch (Amazon, Best Buy) is not pairing with your phone, here are several steps you can take to fix the problem.

Table of Contents

1. Check Settings and Distance

Pairing is affected by various settings within your phone and the distance of the phone from your Apple Watch. Verifying there are no issues with these settings is the first step to correcting pairing issues. 

It helps to know the meaning of the icons within your Control Center. The airplane-shaped icon indicates Airplane Mode. This icon is orange when active. The icon with a tower broadcasting a signal indicates Cellular Data and will be green when active. 

The icon that looks like a dot with two waves coming from the top is the Wi-Fi icon. When active, this icon will be blue. The final icon that looks like a knot is the Bluetooth icon. When active, it will be blue. 

Several of these icons are also visible on your Apple Watch when you swipe up from the bottom. However, there is another icon on your Watch to look out for: an icon of a phone. When your phone and watch are connected, this icon will glow green. If you see the Wi-Fi icon and a network name, it means your Watch is connected over Wi-Fi. 

On the other hand, a red phone icon with a line through it indicates connection issues. 

2. Move Your Watch and Phone Closer Together

The easiest solution is often the most obvious, and that’s certainly the case with the Apple Watch and the iPhone. The range of a Bluetooth connection is roughly 30 feet, but it’s better if your Apple Watch and iPhone are side-by-side when pairing. 

Try to keep the two within 12 inches of each other when you begin pairing.

3. Make Sure Airplane Mode is Off

Both the Apple Watch and the iPhone are capable of activating Airplane Mode. Airplane Mode disables Wi-Fi, cellular data, and Bluetooth. While this allows you to use your phone while on a plane, it makes it impossible to pair an iPhone and Apple Watch.

Disable Airplane Mode before you begin pairing. If Airplane Mode is active, all you have to do is tap the icon to deactivate it.

You should also ensure Airplane Mode is not active on your Watch. Swipe up from the bottom of the screen to access the Control Center and check that the Airplane Mode icon isn’t active.

4. Ensure Bluetooth is Activated

Your Apple Watch uses Bluetooth to pair to an iPhone. This means your iPhone needs to be discoverable, which requires Bluetooth to be active. If the Bluetooth icon is fully white with a gray logo, it means Bluetooth is disabled.

Tap the icon to reactivate Bluetooth. Give it a few seconds to fully turn back on and then attempt to pair your Apple Watch again.

5. Check for iOS Updates

If no update is available, you will see text that says “Your software is up to date.” You cannot check for Watch updates if the Apple Watch is not paired with your iPhone, so make sure your iPhone is fully updated.

6. Reset iPhone Network Settings

Keep in mind that using this feature means you will need to reconnect to any previously saved networks, and any manually configured or trusted networks will return to their default status.

7. Check Your Hardware

Sometimes your Apple Watch may not be pairing due to a hardware issue. A glitch or error on boot-up might cause no other issues with the operation of your device except with pairing. Here are a few ways to correct hardware issues. 

Power Cycle Your Phone and Apple Watch

One potential fix for your Apple Watch not pairing is to turn your iPhone and your Apple Watch off and then turn them back on again. To do this with your iPhone, press the lock button and volume up buttons until the option to power off appears on the screen.

With your Apple Watch, you can power it off by holding down the side button (but not the crown) and then swiping the power off. These same buttons will power each respective device back on. After you have power cycled them, try pairing the devices once more.

Reset Your Apple Watch

If nothing else you’ve tried works, you can reset the Apple Watch to its factory settings. This will clear any saved information that might cause pairing issues, but it will also remove any settings, custom faces, and more. You will need to completely re-setup your Apple Watch after this step.

Still Having Issues with Apple Watch Not Pairing? 

These seven steps should work to correct almost any issue you have with your Apple Watch not pairing. If you try everything on this list and it still will not pair, there may be a deeper problem with either your iPhone or your Watch. If this is the case, take it to a certified repair shop to be examined–it could mean the Bluetooth radio is malfunctioning. 

You're reading Apple Watch Not Pairing? 7 Things To Try

Evernote Not Syncing? Try These 7 Troubleshooting Tips

If Evernote is not syncing on your devices, the changes you make to your notes won’t reflect on your other devices. You’ll either see a sync error message on your screen or there won’t be a message but your notes will not be synced.

There could be various reasons as to why the app won’t sync your notes. However, using some of the methods given below, you should hopefully be able to rectify the issue and get your notes to sync across your devices.

Table of Contents

Check If The Evernote Servers Are Down

One of the possible reasons why Evernote is not syncing on your devices is because the Evernote servers are facing a downtime. As you may already know, when you sync your notes, they are first sent to the app’s servers and then your other devices download your latest notes from there.

Evernote has actually put up a webpage telling you the status of their service. You can head over to the page and find out for yourself if any of their services is facing an outage. If you do see that something’s down, you’ll have to wait until they bring it back up ready to use.

If it shows okay for all their services, then there may be another thing causing the issue on your devices.

Ensure You Haven’t Exceeded The Maximum Number Of Devices

One of the ways to fix the issue is to check your account and remove the devices that you no longer want associated with your account.

Select Devices from the left sidebar on the following screen.

Reinstall The Evernote App On Your Devices

Sometimes, to fix an issue, all you need to do is uninstall the app on your device and then reinstall it from its official website. This clears up any problematic files for the app and gives it a new chance to create fresh configurations.

Reinstall Evernote On iPhone

Tap and hold on the Evernote app on your home screen.

Tap on the X icon on the Evernote app.

Choose Delete to delete the app.

Launch the App Store and reinstall Evernote on your iPhone.

Reinstall Evernote On Android

Tap on OK to confirm the action.

Open Google Play Store and install the Evernote app.

Reinstall Evernote On Windows

Redownload the app from the Evernote website.

Reinstall Evernote On Mac

Launch the Mac App Store and download and install the Evernote app.

Empty The Evernote Trash & Then Sync

Sometimes the notes in the Evernote Trash can cause the app not to sync. You need to make sure there’s nothing left in your app’s trash folder and then try and sync the app.

On Evernote Desktop App: On Evernote Mobile App:

Tap on the three horizontal-lines at the top-left corner and select Trash.

Tap on the three-dots at the top-right corner and choose Empty trash.

Head back to the main interface, tap on the three-dots at the top-right corner, and select Sync. It’ll start syncing your notes.

Check The Activity Log & Delete The Problematic Notes

The Evernote app on your devices actually keeps a log of all the actions that take place in the app. It contains the error messages as well, and with that information, you can find out what’s causing the Evernote not syncing issue on your device.

Empty the trash and you should be able to sync Evernote.

Reboot Your Devices

You’ve likely heard technical teams often telling you to reboot your devices when there’s an issue with your machines. While rebooting doesn’t directly fix the issue, it resets many of the temporary settings and files on your computer. That often resolves many minor issues on the device.

Even if it didn’t work, you aren’t going to lose anything.

Close the Evernote app on your devices.

Turn all of your devices off.

Turn your devices back on.

Launch the Evernote app and see if it syncs.

Do a manual sync if it doesn’t automatically sync.

Disable An Option In Internet Explorer On Windows PCs

On Windows PCs, the Evernote sync feature relies on Internet Explorer. In order for it to work, you must make sure you haven’t asked IE to remain offline.

If that’s the case, you can fix it as below.

Launch Internet Explorer on your PC.

Evernote not syncing can cause great inconvenience to the users who solely rely on it for their note taking tasks. We really hope our guide helps you fix the issue and get your notes to sync across all your devices.

Fix: Lg Soundbar Bluetooth Not Pairing / Working

FIX: LG Soundbar Bluetooth not pairing / working

702

Share

X

LG Soundbar Bluetooth problems are frequent and can have many causes.

If your Bluetooth speaker isn’t pairing, troubleshoot the problem using one of the solutions below.

If you’re looking for some cool speakers, check out our Expert Guides.

Keep an eye on our Peripherals section to be prepared for any errors that you might encounter.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Bluetooth speakers are great since they allow you to get enhanced sound quality from your laptop.

One of the more popular Bluetooth speakers is the LG Soundbar. Despite the great features that this gadget has to offer, it can encounter various issues on Windows 10.

Here are some problems that users reported:

LG Soundbar quit working – This can occur if your system is out of date.

LG Soundbar keeps going quiet – This problem can be related to your sound settings, so be sure that your Bluetooth speaker is selected as the default audio device.

LG Soundbar Bluetooth not pairing – Your drivers might be the problem. To fix the issue, reinstall and update Bluetooth drivers and check if that helps.

Keep reading below to find a more detailed list of solutions on these issues.

What can I do if the LG Soundbar Bluetooth isn’t working? 1. Try using a cable connection

If Bluetooth isn’t working while using the LG Sound Bar, using a cable connection could be a solid workaround.

It’s true that a cable connection defies the whole purpose of a Bluetooth speaker, but at least try using it until you manage to fix the problem.

2.  Update your drivers

As mentioned above, one of the common causes of LG Soundbar problems is an outdated Bluetooth driver.

Updating drivers imply that you visit your laptop manufacturer’s website and download the latest Bluetooth drivers for it.  This also applies if you’re using a Bluetooth adapter.

However, since downloading drivers manually can be a bit tedious, especially if you don’t know exactly what components you should get, use a dedicated tool like Outbyte Driver Updater to help you.

Besides, once you have Outbyte Driver Updater, you can scan your system every once in a while to inspect the status of all drivers and keep your device healthy.

Get rid of Bluetooth issues on your LG Soundbar for good by checking and updating all your drivers with this simple tool.

Free trial Visit website

3. Remove problematic updates

After removing the updates, check if the problem is still there.

Several users reported that removing recent updates fixed the problem for them, but bear in mind that Windows 10 has a tendency to install the missing updates automatically.

In order to prevent this issue from reappearing, you can block Windows 10 from installing updates automatically. If you want to go for this solution, don’t forget to manually check for updates all the time.

4. Update the speaker’s firmware

Bluetooth issues can also be related to the speakers’ firmware.

Sometimes updating the firmware will fix various problems with your speaker.

To see how to properly update your speaker firmware, be sure to check official instructions on the LG Music Flow app and follow them carefully.

Although the procedure is relatively simple, firmware updates can cause permanent damage to your PC, especially if you don’t perform it properly.

In order to avoid any potential problems, follow the instructions carefully, and use extra caution.

Once you update your speaker’s firmware, the Bluetooth problem should be gone.

5. Move your laptop closer to the speaker

Expert tip:

Alternatively, you can connect to your speaker from a greater distance as long as your lid isn’t completely open.

Keep the lid at less than a 40-degree angle and the problem with the connection should be resolved.

This is a peculiar solution, but it has worked for some users, so you might want to try it as a workaround.

6. Make sure that your speaker is set as the default output device

After making these changes, check if your speaker is working properly.

7. Check for the latest updates

Once the updates are downloaded, simply restart your PC in order to install them. After updating your system, check if the problem with the LG Sound Bar is still there.

8. Run the built-in troubleshooter

Once the process finishes, check if the issue is still there.

If so, try running both Hardware and Devices and Bluetooth troubleshooter and check if any of these troubleshooters fixes the problem.

Unfortunately, there are times when the Troubleshooter stops out of the blue. See this exhaustive article on getting this tool back on track.

9. Roll back or reinstall your Bluetooth drivers

If the Roll Back option isn’t available, you need to reinstall the driver. To do that, just do the following:

After the default driver is installed, check if the problem with your Bluetooth speaker is still there.

10. Restart the Bluetooth Support service

After doing that, check if the problem with Bluetooth service is still there. If you have multiple Bluetooth Support services, be sure to repeat the steps for all these services.

11. Make sure that Bluetooth is enabled

If you’re using a laptop, you might have a keyboard shortcut that allows you to easily toggle Bluetooth on or off.

In addition, be sure that you’re properly pairing your speaker. Some Bluetooth devices require you to turn them on and then press the Pair button to pair them with your PC.

Lastly, be sure that Airplane mode feature is disabled.

To do that on your laptop, you can just use a dedicated keyboard shortcut.

12. Remove your Bluetooth device and try to pair it again

After removing the speaker, try to pair it again with your PC and check if that solves your problem.

13. Replace your Bluetooth adapter or try a different speaker

If you keep having issues with LG Sound Bar, perhaps the problem is related to your Bluetooth adapter. Not all adapters are compatible with Windows 10 and other speakers, and if you’re having issues connecting to LG Sound Bar, perhaps your adapter is the problem.

If your adapter is working with other Bluetooth devices, perhaps you might want to consider getting a different Bluetooth speaker.

Problems with Bluetooth and LG Sound Bar can be quite annoying, but we hope that you managed to fix most of these problems by using one of our solutions.

Was this page helpful?

x

Start a conversation

10 Best Apple Watch Series 7 Bands You Can Buy

Sporting a 20 percent larger display with enhanced brightness, IP6X dust resistance, faster charging, and a stronger crack-resistant front crystal, Apple Watch Series 7 has the specs to warrant attention. Add to that the handy QWERTY keyboard and much-improved watchOS 8 software experience, and the Apple Watch 7 remains unmatched in the smartwatch market. Now, if you have pre-ordered the smartwatch, you would be looking for the best Apple Watch 7 bands for a matching fit. If that’s the case, check out this roundup of the best high-quality bands and straps designed for the new Apple Watch 7. 

Best Apple Watch 7 Bands and Straps (2024)

While some users prefer classy-looking leather bands, others find sporty silicone straps and breathable nylon loops more appealing. Not to mention, stainless steel bands with a metal clasp also have a decent fan following.

When it comes to buying accessories for a wearable device like Apple Watch, you have to be picky. You have to consider not only the smartwatch but also personal preference along with specific use cases. Luckily, there are a boatload of Apple Watch 7 bands and straps on sale in the market, so getting one that can fit comfortably to your wrist isn’t a big ask.

Official Apple Watch 7 Bands

starts at $49.99

Shop on Amazon

Pros:

Top-grade material

Beautifully crafted

Comfortable to wear

Cons:

Expensive

As always, Apple has come up with a wide variety of straps for the new Apple Watch 7. So, if you are searching for premium Apple Watch Series 7 bands, make sure to consider these official bands.

Of course, these Apple Watch 7 straps come at a higher price tag, but you can’t go wrong given the top-grade material and finish.

Fullmosa Genuine Leather Band

$14.99

Shop on Amazon

Pros:

High-quality cowhide leather

Neat craftsmanship

Stainless steel buckle

A variety of color variants

Cons:

Less sweat-resistant

For folks who admire rich leather texture, Fullmosa’s genuine leather strap appears to be a strong contender in this roundup. Courtesy of the high-quality cowhide leather along with the neat craftsmanship, this Apple Watch 7 strap features a pro-looking design. And with the ageless leather texture, the band feels more comfortable to wear.

The stainless steel buckle and the round tail design further enrich the appearance of this band. Moreover, the strap features 9 precise cut holes so you can adjust the band to fit your wrist. Priced at $15, the Filmosa leather Apple Watch band comes in more than 10 colors to let you pick a matching pair for your wearable.

Spigen Modern Fit Band

$20.99

Shop on Amazon

Pros:

Modern-looking design

High-grade stainless steel

Sturdy metal clasp

Cons:

Looks a little bulky

If you are looking for a handsome-looking Apple Watch 7 band, this offering from Spigen is worth checking out. Made out of high-grade stainless steel, the Modern Fit watch band features a good-looking design. The brushed finish adds more shine to its profile. Being fully adjustable, the band offers a convenient fit.

Swhas Silicone Watch Band [14 Pack]

$26.99

Shop on Amazon

Pros:

Impressive sporty design

High-quality silicone material

Sweatproof

Cons:

Value for money

Swhas has come up with high-quality sporty bands for the Apple Watch 7. Made out of pretty smooth silicone material, the band features a lightweight and sophisticated design. And since it’s sweatproof, you can comfortably wear it for long hours.

The band features metal lugs that enable it to lock onto the smartwatch securely. Thanks to the adjustable holds, you can comfortably fine-tune the length to fit your wrist. On top of all, Swhas is offering the most value-for-money deal on this list. You get 14 silicone bands for the Apple Watch Series 7 (41mm for $25.99 and 45mm) in a wide range of colors for under $30.

Coobes Genuine Leather Band

$18.50

Shop on Amazon

Pros:

Vintage profile

Horse/ cow leather

Durable stainless steel buckle

Cons:

Could scratch easily

Stitching may come loose

Featuring a vintage profile, Coobes genuine leather band is designed to give a professional look to your Apple Watch 7. Made of horse/ cow leather, this leather band looks quite durable. The visible stitching adds an aesthetic touch to its profile. Besides, the stainless steel buckle ideally complements the leather strap.

Additionally, Coobes leather band features strong lugs that allow it to lock onto the smartwatch securely. And with the precise holes, you also get the flexibility to adjust the band for a comfortable fit. Lastly, you can choose this vintage leather band for Apple Watch 7 in four colors – black, brown, green, and coffee.

Brigtlaiff Nylon Apple Watch 7 Band

$15.99

Shop on Amazon

Pros:

Stretchable nylon material

Skin-friendly, breathable

Cons:

Color may fade away

As the strap is breathable, you can comfortably wear it for hours without any issues. I wouldn’t be surprised if you make it your go-to band during workouts. Featuring durable lugs, the band is designed to lock to the smartwatch. Even better, Brigtlaiff Apple Watch 7 stretchable nylon band is priced at $16 and comes in a plethora of colors. Hence, you can’t get a more befitting strap for your all-new Apple Watch at an affordable price point.

Witzon Elastic Solo Loop

$5.99

Shop on Amazon

Pros:

Breathable nylon material

Skin-friendly, comfortable

Sweat-resistant

Cons:

Stitching could be better

Are you searching for a reasonably good nylon band at a low price point? If yes, Witzon’s stretchable nylon band could be a safe bet at just $6. Made of fabric woven nylon material, the strap is super comfortable to wear. And with the adjustable buckle, it also offers the needed flexibility of full adjustment.

The elastic braided strap is skin-friendly and can also resist sweat. Thus, you can wear it all day long without having to face irritation issues. Furthermore, the Witzon strap features lugs on either side for secure locking. When you consider all these notable features, the $6 price tag seems low compared to other nylon bands.

SUPCASE Unicorn Beetle Pro

$21.99

Shop on Amazon

Pros:

Shock-absorbing design

Offers protection to the screen

Durable band, precise cutouts

Cons:

Looks really bulky

If ultimate protection for your Apple Watch 7 is on top of your mind, you shouldn’t miss out on the SUPCASE Unicorn Beetle Pro. This is a rugged Apple Watch 7 case that comes bundled with a durable strap. Featuring a shock-absorbing bumper, it has been designed to provide enhanced safeguard to the smartwatch against shock and accidental drops. 

Maledan Silicone Bands [6 Pack]

$13.99

Shop on Amazon

Pros:

Smooth silicone finish

Lightweight, skin-friendly

Waterproof

Cons:

Colors seem faded

If you are someone who prefers to have some extra silicone bands at your disposal, Maledan’s 6-pack silicone bands at just a $14 price tag should resonate with your preference. These bands feature a lightweight design and securely pair with the Apple Watch, courtesy of the durable lugs. They are skin-friendly and can also keep sweat away to ensure irritation doesn’t bother you.

Another feature worth taking note of is a sturdy buckle with hassle-free closure. For more flexibility, it features several precise holes. And when you couple these features with several color options, Maledan silicone bands seem to be a great choice. Overall, this is definitely one of the best Apple Watch 7 straps in the market right now.

iiteeology Stainless Steel Band

starts at $16

Shop on Amazon

Pros:

Made of stainless steel

Brushed finish

Sturdy adapters

Cons:

Lacks better micro-adjustments in size

Last but not least, iiteeology’s modern-looking metal band could be a dashing companion for your Apple Watch 7. Made of high-grade stainless steel, the band gives an executive touch to your smartwatch. The brushed surface further enhances its appearance.

At just 2.0mm thickness, the band sports a slim profile and provides a secure fit with a sturdy new built-in connector. Moreover, you have the option to choose from among 10 colorways, including space gray, yellow gold, jet black, and more.

Choose From These Amazing Apple Watch 7 Bands

Apple Watch Blood Sugar Measurement Coming In Series 7, Claims Report

A Korean report claims that an Apple Watch blood sugar sensor will be included in the Series 7 device, when it is launched later this year.

With health applications a major selling point of the Apple Watch, it has long been expected that the Cupertino company would want to expand its medical capabilities …

Background

When Apple first launched the Apple Watch, the company primarily marketed it as a convenient way to view and respond to notifications. It fairly quickly became apparent, however, that it was the health and fitness features which were driving sales, and Apple adapted its messaging and product development focus accordingly.

CEO Tim Cook had initially suggested that the company would be cautious in adding medical capabilities to the watch, as it feared that the need for FDA approval could hold back innovation.

We don’t want to put the watch through the Food and Drug Administration (FDA) process. I wouldn’t mind putting something adjacent to the watch through it, but not the watch, because it would hold us back from innovating too much, the cycles are too long. But you can begin to envision other things that might be adjacent to it — maybe an app, maybe something else.

Responding to customer demand, however, Cook changed his mind. The company added ECG functionality to the Watch in 2023, including Afib detection – and last year saw blood oxygen saturation added to the capabilities of the Series 6.

Apple Watch blood sugar sensor

A blood sugar sensor would be an obvious next step. The American Diabetes Association estimates that more than 10% of Americans have diabetes, and that over 26 million of them are undiagnosed. Adding a blood sugar sensor to the Apple Watch could play a hugely valuable role in prompting formal testing, diagnosis and treatment.

An ET News reports claims that both the Apple Watch Series 7 and Samsung Galaxy Watch 4 will be able to measure blood sugar when each is released later this year.

Samsung Electronics will be equipped with a blood glucose measurement function in the new smart watch ‘Galaxy Watch 4’ (tentative name) to be introduced in the second half of this year. It is a no-blood sampling method that detects the level of glucose in the blood without blood collection using an optical sensor, and is expected to contribute to the health management of the general public as well as diabetics […]

Not only Samsung Electronics, but also Apple is applying the blood glucose measurement function to the Apple Watch 7 to be introduced this year. With the related patent technology secured, it is focusing on ensuring reliability and stability prior to making the technology available.

It’s not clear at this stage whether the existing infrared sensor will be able to act as a blood glucose detector too. You can already buy affordable home test devices that sync to your iPhone and Apple Watch, but these rely on small pin-pricks. The current focus is on non-invasive detection, and this can be achieved via infrared sensors.

The heartrate sensor in all Apple Watches is capable of acting as an O2 sensor, but Apple reserved this feature for the Series 6. Even if it turns out that the same sensor could measure blood sugar too, the company may take the same approach and make it a Series 7 exclusive feature for marketing reasons.

FTC: We use income earning auto affiliate links. More.

How To Know Whether Your Apple Watch Is Connected To The Internet Or Not

You need internet on your Apple Watch to use Siri, make FaceTime calls, and more. If you’re unsure whether your Apple Watch has Wi-Fi, cellular, or internet connectivity or not, this tutorial has got you covered. It will show you the different ways your Apple Watch can access the web and what its tiny network connectivity icons mean.

Quick Check

To quickly check whether your Apple Watch has internet connectivity or not, press the Digital Crown to call Siri. Now, make a request, and if it’s successful, your Apple Watch is connected to the internet.

Being a watch owner, if you want to learn more about this topic, please continue reading.

Internet Connectivity on Apple Watch

Apple Watch can connect to the internet via three ways – Wi-Fi, cellular (on cellular models), or use your iPhone’s internet.

To start, bring up the watchOS Control Center by swiping up on the watch face. If you are inside an app, press and hold the bottom part of the watch screen and pull it up to bring the Control Center. Your Apple Watch is connected to the internet if you see any one of the three icons mentioned below.

1. Green iPhone icon

This means your Apple Watch is connected to your iPhone via Bluetooth, and it can use your iPhone’s internet. You see this icon most often.

Even if you turn off Wi-Fi on your Apple Watch, the wearable will use your iPhone’s cellular (5G, 4G, 3G) or iPhone’s Wi-Fi connection to access the internet. But if mobile data and Wi-Fi are off on your iPhone as well, the watch also obviously loses internet access.

Use case: Your iPhone is charging on the table nearby, and you make a FaceTime audio call from your Apple Watch or use Siri on it.

2. Wi-Fi icon

When your Apple Watch isn’t connected to the iPhone, but only to a known Wi-Fi network, you will see a tiny blue Wi-Fi icon instead of the green iPhone icon. This means, your Apple Watch can connect to the internet even without the iPhone being around.

To check, go to iPhone Settings (not Control Center) and turn off Bluetooth and Wi-Fi. This will disconnect the Apple Watch and the iPhone. In a few seconds, the tiny green iPhone icon in your Apple Watch Control Center will be replaced by a Wi-Fi icon.

Use case: You’re home or in the office, and your iPhone is switched off. Your Apple Watch is connected independently to the previously joined known Wi-Fi and can make FaceTime audio calls, use Siri, download apps, etc., on your wrist.

3. Green bars or dots

If you have a cellular model of the Apple Watch and you’re out of range from your iPhone or known Wi-Fi, your watch will use mobile data to use Siri, make FaceTime calls, and everything else that requires the internet.

The big green oval cellular tower icon signifies your Apple Watch is connected to mobile data. And the tiny small green bars (or dots) show the signal strength.

Use case: You go for a morning run, leaving your iPhone behind. Your cellular Apple Watch can use mobile data to make FaceTime calls, use maps, etc.

What does the red slashed iPhone icon on Apple Watch mean?

The tiny red phone icon means your Apple Watch is disconnected from the iPhone. Once you enable Bluetooth on your iPhone and Apple Watch, the devices reconnect. As a result, the red iPhone icon is replaced by the usual green iPhone icon.

If your iPhone isn’t nearby, but your watch is connected to Wi-Fi or cellular (on cellular models), this red iPhone icon does not show in the Control Center.

How to access Wi-Fi on Apple Watch

Open Settings and tap Wi-Fi.

Tap the Wi-Fi toggle to enable or disable it.

The Wi-Fi network your Apple Watch is connected to appears under the Wi-Fi. Tap it to change Auto-Join settings or Forget This Network. The other networks are listed below Choose Network. You can tap one from here to connect your Apple Watch to it.

The Wi-Fi icon is also present in the watchOS Control Center.

How to access Bluetooth on Apple Watch

Open Settings, scroll down and tap Bluetooth.

Go past the connected or your iCloud Bluetooth devices (like AirPods) to see the Bluetooth toggle. You can enable and disable Bluetooth from here. Tap (i) next to a device name to forget/remove it.

Since your Apple Watch and iPhone connect to one another via Bluetooth, the watchOS Control Center does not have a Bluetooth icon to prevent users from accidentally or quickly turning it off.

Your Apple Watch and iPhone use a combination of Bluetooth and Wi-Fi for AirDrop, AirPlay, Find My, location services, quickly transferring screenshots from Apple Watch to iPhone, and more.

Check out next:

Update the detailed information about Apple Watch Not Pairing? 7 Things To Try on the Achiashop.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!